Welcome Pack: Clicky Twenty 🎲2️0️🎲 (Patreon)

I’m super excited about this design, which is entirely a Nick Design! Even though he won’t take credit for anything, Nick has been such a big part of my 3D printing journey—teaching me how to print, helping me learn to design, and keeping everything running smoothly behind the scenes.

Lately, Nick has had a bit more time to create and we're thrilled to share his newest design: the D20 Dice! 🎲 It’s the start of what we hope will become a fun, customizable series. We've even included a rounded cap which can be used to turn this into a 20-clicker ball and some fun extra symbols for 1 and 20 alternatives! This one does require some assembly, with separate base and connector pieces so make sure to read the datasheet carefully - but no glue should be required! We originally planned to wait until we had assembly videos ready, but Nick’s been so excited to share it so we decided to go ahead now. Written instructions included in download and videos coming soon!

We hope you have a blast with this one - I know we've been loving it! 🎲2️0️🎲

🌊☀️SUMMER SALE ALERT!☀️🌊Need a few extra switches for this one? We’re doubling our Supporter Discount on Pawpers—20% OFF instead of the usual 10%! A date for the Summer Sale has not be set yet as we are awaiting our next refresh of pawpers but stay tuned on our Instagram for more details!

Clicky Twenty Multi-Pack can be found HERE!

Like most of my designs, this is a clicky design that requires a mechanical keyboard switch to make the clicky part. These models feature a universal base design which has been tested with many keyboard switches and 99% of them work! I have an up to date list of verified clickers with links you can find HERE. This design should be compatible with most MX style keyboard switches, however, the two metal contacts on the bottom of the switch must be clipped off flush (or folded over) to ensure the switch seats properly in the base (this is a destructive process).  

This pack contains 1 unique base designs and 30 cap designs. There is no keychain option for this design. You need 20 bases, 12 hubs, 20 clickers and 20 caps to complete this design. There are two types of Hubs, one that is tapered and one that is not. The tapered one may be easier to install but the non-tapered one might hold better. There are also two types of bases to account for printer tolerances. If your printer is good at handling tight tolerances, use the Tight base. If your printer cannot handle tight tolerances, the standard version is for you. Note that some filaments may over/under extrude which could impact assembly.

Photo Colors 🎨

Black - Prusa Galaxy Black

Silk Green - Overture Silk Neon Green

Silk Bronze - Overture Silk Copper PLA

Dark Blue - FlashForge Burnt Titanium

Pink - Cookiecad Pale Pink Elixir

Silk White - Amoybaby Silk White PLA

3D Printing Settings:

Layer Height: 0.2mm (recommended)

External Perimeter (Outer Wall): 0.33mm (recommended)

First Layer Extrusion Width (Initial Layer Line Width): 0.35mm (recommended)

Only one wall on first layer: True (recommended)

Scale: 100% (Everything is modeled with tight tolerances and should not need to be resized)

Orientation: Print the caps face down so you have a smooth surface for clicking! (recommended for flat)

NOTE: I've found the best way to get the most crisp details on these clickers is to start with the smallest details first and work up from there. Here is the order I recommend after LOTS of trial and error:

Small Detail (Numbers/Symbols)

Everything Else (Base Colors)

⚠️WARNING⚠️ - This pack requires very good bed adhesion to ensure the best possible results for your finished clicker cap. It is recommended to clean your bed with soap and water before printing or whatever your specific printer manufacturer recommends for a deep bed clean!

Stay Pawsitive! 🐾

Clicky Twenty Multi-Pack can be found HERE!