Supporter Exclusive: Click Ten🎲1️⃣0️🎲 (Patreon)

So here is the next dice in the clicky dice series, the D10! Fun Fact, the D10 also doubles as a D100 and a full set of dice has a 0-9 and 00-90 dice! These have been super fun to make and I know people are anxious for the whole set but these take quite a lot of time to design so they are still fully 3D printable. I hope you will continue to bare with me as we continue this journey into clicky dice! 🎲1️⃣0️🎲 - Nick

It’s a little smaller than the D20 and D12, includes caps numbered 0–9 and 00-90. There is no rounded option for the D10. Whether you're into fidgeting, collecting, or just like shiny, clicky things, this one’s a fun little addition.

So here is the next dice in the clicky dice series, the D10! Fun Fact, the D10 also doubles as a D100 and a full set of dice has a 0-9 and 00-90 dice! These have been super fun to make and I know people are anxious for the whole set but these take quite a lot of time to design so they are still fully 3D printable. I hope you will continue to bare with me as we continue this journey into clicky dice! 🎲1️⃣0️🎲 - NickIt’s a little smaller than the D20 and D12, includes caps numbered 0–9 and 00-90. There is no rounded option for the D10. Whether you're into fidgeting, collecting, or just like shiny, clicky things, this one’s a fun little addition.Click Ten Multi-Pack can be found HERE!Like most of my designs, this is a clicky design that requires a mechanical keyboard switch to make the clicky part. These models feature a universal base design which has been tested with many keyboard switches and 99% of them work! I have an up to date list of verified clickers with links you can find HERE. This design should be compatible with most MX style keyboard switches, however, the two metal contacts on the bottom of the switch must be clipped off flush (or folded over) to ensure the switch seats properly in the base (this is a destructive process).  This pack contains 1 unique base designs and 12 cap designs. There is no keychain option for this design. You need 10 bases, 2 hub As, 10 hub bs, 10 clickers and 10 caps to complete this design. There are two types of Hubs, one that connects to 5 bases and one that connects to 3 bases. There are also two types of bases to account for printer tolerances. If your printer is good at handling tight tolerances, use the Tight base. If your printer cannot handle tight tolerances, the standard version is for you. ⚠️Note that some filaments may over/under extrude which could impact assembly.Photo Colors 🎨

TTYT Silk Orange

Amoybaby Sky Blue Silk PLA

Prusa Galaxy Black

3D Printing Settings:Layer Height: 0.2mm (recommended)External Perimeter (Outer Wall): 0.33mm (recommended)First Layer Extrusion Width (Initial Layer Line Width): 0.35mm (recommended)Only one wall on first layer: True (recommended)Scale: 100% (Everything is modeled with tight tolerances and should not need to be resized)Orientation: Print the caps face down so you have a smooth surface for clicking! (recommended for flat)NOTE: I've found the best way to get the most crisp details on these clickers is to start with the smallest details first and work up from there. Here is the order I recommend after LOTS of trial and error:

Small Detail (Numbers)

Everything Else (Base Colors)⚠️WARNING⚠️ - This pack requires very good bed adhesion to ensure the best possible results for your finished clicker cap. It is recommended to clean your bed with soap and water before printing or whatever your specific printer manufacturer recommends for a deep bed clean!Stay Pawsitive! 🐾Click Ten Multi-Pack can be found HERE!