Home Creators Posts Import Register Favorites Logout

Downloads

Content

This is a remake of the original self-powered starter base mk3, but with better quality of life changes like adding in the ability to upgrade the machine to run at max rpms from an external source without it breaking, an auto jumpstart system, less gearboxes, and many more changes.

Overall though, this workshop contains every single possible crafting system that the Create Mod offers all the while not needing any brass or any recourses from the nether to create, but rather being set up in a way to be upgraded as your progress throughout the game, with spaces being left in the machine to manual place, the mechanical crafters, crushing wheels, blaze burner, haunted campfire, and deployers.Base Functions:WashingSmokingBlastingFillingCuttingMillingCompactingPressingMixingUpgradable Functions:Haunting - To be placed under the encased fanBlaze Burner - To be placed under the mixer basinDeploying - To be placed next to the mixer.Mechanical Crafting - To be placed in open space on the side of the machine.Crushing - To be placed in the machine from above in the 2 holes.Blaze Burner Automated Fueling - A Deployer to be placed behind the Blaze Burner.

Estimated Required Inputs Per Hour:Not ApplicableEstimated Outputs Per Hour:Not ApplicableRequired Mods:The Create Mod

Setup Guide:1. Place water under one of the encased fans and lava under the other.2. Waterlog the mechanical pump and the two blocks in front of it in the middle of the machine.Troubleshooting:Machine made on Create v6.0.10, Minecraft Snapshot 1.21.1, NeoForgeMachine tested on Create v6.0.8, Minecraft Snapshot 1.20.1, ForgeMachine tested on Create v6.0.8, Minecraft Snapshot 1.20.1, Fabric

Files

Comments

Dominik

It does'nt Work! I pastet it in correctly but it did'nt do anything. Then I've placed a shaft in Front of the Steam engine (because it did'nt Paste in) and now its mostly working but the deployer and the crushing wheels don't Work! What do i have to do?

Our Creation

I'll need to update the setup guide to add in a notice to check and see if there is a shaft pasted in or not. As far as the deployer not spinning its probably because its designed to be pulling power from the mechanical crafters but if they aren't placed or cog wheels haven't been placed in there stead it wont receive that power which is also something I should have motioned or at lest placed some temporary cogwheels in the schematic. If you left the sign in the middle that says place crushing wheels, then they wont work which is the only thing I can think of for why that is happening. Any block that's in between crushing wheels with straight up prevent them from working even if it's a sign.

Dominik

Thank you very much, i will try this as soon as i can! But the crushing wheels won't work because they're both spinning clockwise.

Dominik

Or counterclockwise don't really know.

Our Creation

If that's the case that must mean the fans and belts are also spinning in the wrong direction. On the side of the steam engine there is a button to allow you to change the rotational power output direction, which will vary based on the xyz you placed the machine. I should have mentioned that in the description as well.

Dominik

Oh i see... Thank you!!

Dominik

No, I've checked. The belts and Fans are spinning in the right direction and If i Change the rotational Output, they will spin in the false direction and the crushing wheels still won't work.

Our Creation

Alright, If that's the case the only thing I can think of is a glitch I discovered a while ago where chain conveyors when pasted in depending on there xyz axis will falsely invert the rotational power even though they are supposed to all supposed to spin in the same direction. To be honest at this point I'm not entirely sure if that even is problem. I've dissected the machine trying to find something else wrong but I cant come up with any conclusions other than that. So I'm going to go and gut and redo the entire internals of the machine removing any chain conveyors other than the one feeding the mixer and hope that fixes the issue cause I'm really at a loss to what else it could be.

Dominik

Should i try replacing all of the chain conveyors then?

Dominik

OK, i've found the issue!

Dominik

I replaced the two cogs above the belt next to the Fans with chain conveyors and now its working!

Our Creation

Glad it's working for you now. That reaffirms my theory of the chain drives being the issue then, cause that's right where the glitch would occur under that inverted chain drive, and when I do the same thing you did the crushing wheel spins in the wrong direction. I went and made a new version that removes all the chain drives other than very pacific ones that aren't required to be directional to prevent this glitch from happening again: https://www.patreon.com/OurCreation/posts/self-powered-mk-163647071?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link

Dominik

Cool that you Made a new Version! Sadly i can't afford to spend my money like that.

Our Creation

My apologies I didn't notice this build was listed as an promotional build. I sent a link series gift code to your email so you can use the new model; which is only fair since you helped me resolve the bug.

Dominik

Thank you very much! I really appreciate it!