Melting Popsicle - Hanger - Home Decor (Patreon)

STL and 3MF files found here.

This Melting Popsicle design is multi-functional and can be mounted as a hanger several different ways. The integrated mounting hole allows for the use of magnets or screws.

To use on magnetic surfaces, simply glue a 10mm x 3mm magnet into the integrated mounting hole.

To wall mount, that same integrated mounting hole can also fit over the head of a #10 screw or nail.

The final product is printed in two parts, the Popsicle and the Stick.

Simply print each part and then slide the Stick into the hole at the top of the Popsicle.

It is recommended to glue the Stick in place for long term use.

There is also a file with both objects combined for those wanting to print all at once.

The 3mf file is set up with each object on its own build plate.

With this file, the recommended settings are already preset.

The Popsicle is a single color, but free to paint to your hearts desire.

For single-color printing, it is recommended to use the STL files. 

Recommended Settings listed below.

Recommended Settings:

Seam position set to "Back"

This is with the bottom of the Popsicle facing forward. Adjust accordingly if printing in a different orientation.

Reduce infill to 10% and changed to Cross Hatch

Fin