Leaning Tower of Pisa - LED Lamp (Patreon)

STL and 3MF files found here.

As a lover of historical architecture found around the world, I wanted to create a design that brings the iconic Leaning Tower of Pisa from Pisa, Italy into my home.

The lamp is designed around the Bambu Lab LED Lamp Kit 001 and the Bambu Lab LED Flame Tea Light Candle Set, which can be purchased directly from Bambu Lab.

There are also several of these general LED puck style lights available online on Amazon, AliExpress, TEMU, etc. Anything under 60mm in diameter will fit.

Similar to the LED puck style light, general tea light candles will work as well. Anything under 37.5mm in diameter will fit.

Each piece is printed individually to ensure the easiest print and assembly as possible.

The Tower is printed vertically, without lean, for the above reason.

The Base holds the LED Lamp and incorporates a slant to give the Tower it's defining lean when assembled. There is also a version of the Base that keeps the Tower straight for those who prefer that look.

The 3mf file is set up with each part included in one file.

With this file, the recommended settings are already preset.

For single-color printing, it is recommended to use the STL files. 

To achieve the two-tone look, simply add a pause at layer 6 and conduct a manual filament change.

Recommended Settings listed below.

Recommended Settings:

Supports needed for best quality

Manually paint supports at the top of the tower on the inside only

No other supports needed

Reduce infill to 10% and changed to Cross Hatch

Fin