LED Desk Lamp - Home Decor (Patreon)

STL and 3MF files found here.

The lamp is designed around the Bambu Lab LED Lamp Kit 001 and the Bambu Lab LED Flame Tea Light Candle Set, which can be purchased directly from Bambu Lab.

There are also several of these general LED puck style lights available online on Amazon, AliExpress, TEMU, etc. Anything under 60mm in diameter will fit.

Similar to the LED puck style light, general tea light candles will work as well. Anything under 37.5mm in diameter will fit.

Each piece is printed individually to ensure the easiest print and assembly as possible.

There are two different Lamp Shades currently designed, with more to come.

The Standard Lamp shade can be printed with a smooth outer surface or with "fuzzy skin" enabled to give the look seen in the product photography

If you would like to print the Fuzzy Skin Lamp Shade, it is highly recommended to use the included 3mf file, as all necessary changes to achieve the best result are done for you.

The Base can hold both the LED Lamp and a standard Tea Light Candle.

There are two tabs on each side of the base that line up to corresponding channels on each shade. Simply slide the Shade onto the Base and twist to lock.

The 3mf file is set up with each part included in one file.

It is highly recommended to use this file if you'd like to print the Fuzzy version of the Standard Lamp Shade

With this file, the recommended settings are already preset.

For single-color printing, it is recommended to use the STL files. 

Recommended Settings listed below.

Recommended Settings:

Change wall loops to "3"

This is to ensure there is no infill in the lamp shade and provides the best overall quality

Reduce infill to 10% and changed to Cross Hatch

To achieve the look below when using the raw STL files, use the following settings

Standard or Fuzzy Shade STL file

Under "Others" tab in Bambu Studio, set Fuzzy Skin to "Contour"

Fin