Lure Ball - Pokémon Card Storage (Patreon)

STL and 3MF files found here

What better way to store your favorite water-type Pokémon than the Lure Ball from Generation II!

This design uses the same bottom pieces, drawer, and push push mechanism as the original Pokémon Card Storage.This design maintains all the original features and top pieces are even interchangeable, so feel free to customize to match your other decor or mood! Or more likely, Print 'em All!

The 3mf file is set up for easy printing, with all recommended settings preset and each piece of the Card Storage sorted onto the appropriate build plate.

After extensive testing, there have been several changes to print settings and print speeds for various parts in this design. It is HIGHLY recommended to use this file, or at least start here and change based on your own results

The stl file is available for those who would prefer working with that file format.

Recommended Settings listed below.

This will be the basic settings changes needed for a successful print, for more detailed setting changes it is recommended to use the included 3mf file.

Recommended Settings:

Use PETG for the Spring

While PLA will work, it will deform easier over time. PETG resists this deformation much longer.

Wall count increased to 3

Infill reduced to 10% and changed to Gyroid

Normal supports

This is required for the top pieces.

Filaments Used:

Bambu Lab PLA Basic - Cyan

Bambu Lab PLA Basic - Red

Bambu Lab PLA Basic- Yellow

Bambu Lab PLA Basic - Black

Bambu Lab PLA Basic - Jade White

Fin