XENOMORPH IS AVAILABLE NOW! (Patreon)

Hiii!! I hope you are well!

I added the rear part of the body and the slime in the mouth as you suggested.

They are joined together with ''pins'' that you will find in the file. I recommend that you attach the back first to avoid problems with the head and tail. And if any of you want to print it without the drool in your mouth, just find “Slime” in the object list and right-click/delete.

If you use “PIN.01” and PLA+ or another resistant filament, I recommend that you first insert one corner of the pin into the hole in the body and then the other corner. To attach the rear part, do the same with the rear part.

If you use “PIN.02,” you will need to use glue. In any case, you could use glue on both pins to prevent them from coming loose.

Tail and head files have customized holders for better overhang results. I recommend that you use the printer's pliers to remove it, as you may hurt yourself trying to remove it.

3 walls, 5% gyroid infill. No supports.

Tested down to 80%.

Remember that to change the color of the objects and not have uneven edges, you must assign color to them from the object list.

If you feel that the head support does not come off easily, I recommend that you use your printer's pliers to remove it.

l includes the STL, a 3MF file and another keychain version.

Enjoy it, and thanks for the support!

The download links can be found in the pinned image or click here.

Filaments used:

Polyterra PLA Army Purple

PolyTerra PLA White

Esun PLA+ Grey

Ender Creality PLA+ Apple Green