Articulated Beetlejuice Sandworm! (Patreon)

This design was part of our 2024 SEPT releases and has been archived to the Serev3D Vault. You can still get the files, choose one of the options:- by purchasing it in our Serev3d web shop, OR- signing up for an Annual Membership on our patreon (with a 15% discount, you get instant access to our entire library at the Serev3D Vault), OR -by keeping an active paid Patreon membership with us for 3 consecutive months: upon your 3rd billing, we unlock The Vault for you with instant access to our entire Serev3D library!

--------------------------

If you already have the files, here is all the INFO:

The Beetlejuice Sandworm is ready to strike a fright into your Halloween lineup!Included with Beetlejuice Sandworm design:🪱Articulate Serpent Medium size🪱Stl and multicolor and smooth skin version 3mf🪱No supports needed

Print difficulty level: Beginner to intermediate

Recommended print settings: (If you use Bambu or Orca slicer, all the print settings are automatically loaded in each version's 3mf files)

-Layer height: 0.2mm, if you want less thicker layer lines you can set it to 0.16mm (Or even lower, or turn on Adaptive Layer Height if you want very minimal visible layer lines, but it will increase your printing time)-Wall loops: 3-Infill: 8%, Gyroid-Supports: No supports needed

Print time: 9h (multicolor version is about 29 hours, if you scale the sandworm down then you can reduce the printing time too)

▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️

Resources

Filament: Polymaker PLA Matte White 

Primer: Rust-Oleum Painter's Touch Spray Paint White

Paint: Fantastory Craft Acrylic Paint Set

Clear coat finish: Rust-Oleum Matte Clear Coat or if you want glossy look Rust-Oleum Clear Gloss

-----------------------------

(if you have a multi-color AMS printer, you can also just print the colored 3mf file, but in our opinion, a real post-processing will always give a more real lifelike touch and originality to the prints!)

Post-processing steps:

Prepare & Prime: Clean your model and apply a smooth coat of Rust-Oleum Painter's Touch Primer. Let it dry completely.

Painting & Sealing: Paint with your chosen color from the acrylic paint set, then apply a clear coat (matte or glossy) for protection and finish. (Allow each layer to dry fully before moving to the next for the best results.)

▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️

Check out awesome Serev3D community makes in the past month!

Have fun, we are looking forward to see your 3d prints!