Creepy No-Face trinket box (Patreon)

This design was part of our 2024 SEPT releases and has been archived to the Serev3D Vault. You can still get the files, choose one of the options:- by purchasing it in our Serev3d web shop, OR- signing up for an Annual Membership on our patreon (with a 15% discount, you get instant access to our entire library at the Serev3D Vault), OR -by keeping an active paid Patreon membership with us for 3 consecutive months: upon your 3rd billing, we unlock The Vault for you with instant access to our entire Serev3D library!

--------------------------

If you already have the files, here is all the INFO:

This is for all the Studio Ghibli fans! (or people who like fun and creepy looking prints)Included with Creepy No-Face trinket box🦷Trinket Box: The dimensions of the inside part is approx 75x65x65mm, on a 100% scale it's suitable to hold small objects, such as coins, keys, airpods with its box and jewelry🦷Movable box: Simple to assemble, it has a top and bottom parts, a pin and a "pin cup" at the back, which we recommend to glue on the pin.🦷Stl and multicolor 3mf

INFO:

Print difficulty level: Beginner

Recommended print settings: (If you use Bambu or Orca slicer, all the print settings are automatically loaded in each version's 3mf files)

Layer height: 0.2mm , (Also you can turn on Adaptive Layer Height, if you want less visible layer lines on the top surfaces of your print)Wall loops: 3Infill: 10%, GyroidSupports: you can turn on Auto Tree support with a threshold angle of 30 degrees, TopZ Distance 0.28, BottomZ Distance 0.2

Print time: 4h

----------------------------

Resources

Filament: Polymaker PLA Matte White

Filler Primer: Rust-Oleum Filler and Sandable Primer Spray 

Sandpaper: 3m Pro Grade Grit: 120, 3m Pro Grade Grit:220, 3M Wet or dry Sandpaper Grit: 600 and/or Bates- Sandpaper, 18 Pack, 12 Grits, 120 to 3000

Primer: Rust-Oleum Painter's Touch Spray Paint White

Paint: Fantastory Craft Acrylic Paint Set

Clear coat finish: Rust-Oleum Matte Clear Coat or if you want glossy look Rust-Oleum Clear Gloss

-----------------------------

(if you have a multi-color AMS printer, you can also just print the colored 3mf file, but in our opinion, a real post-processing will always give a more real lifelike touch and originality to the prints!)

Post-processing steps:

Sanding: Start with coarse sandpaper (120 grit) to smooth layer lines, then use finer grits (220) and lastly (400-600) for a more polished surface.

Filler Primer: Apply a filler primer coat to cover imperfections. Let it dry completely.

Wet Sanding: Use 400-600 grit sandpaper for wet sanding the primer, repeating as needed for smoothness.

Final Primer Coat: Apply a thin layer of regular primer to create an even base for painting.

Painting & Sealing: Paint with your chosen color from the acrylic paint set (black and white acrylic mainly, you can blend it with grey), then apply a clear coat (matte or glossy) for protection and finish. (Allow each layer to dry fully before moving to the next for the best results.)

▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️

Check out awesome Serev3D community makes in the past month!

Have fun, we are looking forward to see your 3d prints!