Mini Oogie Dice Holder (Patreon)

This design was part of our 2024 OCT releases and has been archived to the Serev3D Vault. You can still get the files, choose one of the options:- by purchasing it in our Serev3d web shop, OR- signing up for an Annual Membership on our patreon (with a 15% discount, you get instant access to our entire library at the Serev3D Vault), OR -by keeping an active paid Patreon membership with us for 3 consecutive months: upon your 3rd billing, we unlock The Vault for you with instant access to our entire Serev3D library!

--------------------------

If you already have the files, here is all the INFO:"Mr. Oogie Boogie says there's trouble close at hand, you'd better pay attention now 'cause I'm the Boogie Man"Included with Mini Oogie Dice Holder:🎲Dice Holder; the 100% scaled version is suitable to hold any dice, classic or DnD!🎲Figurine version (without dice holder)🎲Magnet🎲Stl and multicolor 3mf

INFO:Recommended to use Automatic Tree(organic) supports, to support the arms and the hanging top of head part, in a similar way as it's shown in the sliced version in the video.You can use glow in the dark filament, or glow in the dark paint to make him look like the real Oogie Boogie from Nightmare Before Christmas!

Recommended print settings: (If you use Bambu or Orca slicer, all the print settings are automatically loaded in each version's 3mf files)

Layer height: 0.2mm , if you want finer details you can set it to 0.16 (Also you can turn on Adaptive Layer Height, if you want less visible layer lines on the top surfaces of your printWall loops: 3Infill: 10%, GyroidSupports: you can turn on Auto Tree support with a threshold angle of 30 degrees, TopZ Distance 0.28, BottomZ Distance 0.2 , it will automatically put some supports under the belly and the arms.

----------------------------

Filament resources without the need of paint or post processing:

For the eyes and stiches: GEEETECH PLA 3D Printer Filament Silk Black

For the glowing body: DURAMIC 3D PLA Glow in The Dark Filament Green

-----------------------------

Resources for painting and post processing:

Filament: Polymaker Matte Black PLA

Filler Primer: Rust-Oleum Filler and Sandable Primer Spray 

Sandpaper: 3m Pro Grade Grit: 120, 3m Pro Grade Grit:220, 3M Wet or dry Sandpaper Grit: 600 and/or Bates- Sandpaper, 18 Pack, 12 Grits, 120 to 3000

Primer: Rust-Oleum Painter's Touch Spray Paint White

Paint: Fantastory Craft Acrylic Paint Set , and SpaceBeams Aurora Glow in the Dark Paint

Clear coat finish: Rust-Oleum Matte Clear Coat or if you want glossy look Rust-Oleum Clear Gloss

Post-processing steps:

Sanding: Start with coarse sandpaper (120 grit) to smooth layer lines, then use finer grits (220) and lastly (400-600) for a more polished surface.

Filler Primer: Apply a filler primer coat to cover imperfections. Let it dry completely.

Wet Sanding: Use 400-600 grit sandpaper for wet sanding the primer, repeating as needed for smoothness.

Final Primer Coat: Apply a thin layer of regular primer to create an even base for painting.

Painting & Sealing: Paint with your chosen color from the acrylic paint set, then apply a clear coat (matte or glossy) for protection and finish. (Allow each layer to dry fully before moving to the next for the best results.)

▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️

---- Check out our full designs list at the Serev3D Vault ----

---- Check out our Community Prints collection, all the prints made by our amazing members! ---

▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️Have a fun 3d printing time!!-The Serev3D team.