SEREV3d

Vecna Candle Holder (Patreon)

Published:

2024-09-08

Edited:

2026-01-10 21:43:33

Imported:

2026-09

Tags:

candle dnd vecna

Content

This design was part of our 2024 SEPT releases and has been archived to the Serev3D Vault. You can still get the files, choose one of the options:- by purchasing it in our Serev3d web shop, OR- signing up for an Annual Membership on our patreon (with a 15% discount, you get instant access to our entire library at the Serev3D Vault), OR -by keeping an active paid Patreon membership with us for 3 consecutive months: upon your 3rd billing, we unlock The Vault for you with instant access to our entire Serev3D library!

--------------------------

If you already have the files, here is all the INFO:

We decided to make all our past Cute Candles Collection into freebies,All our members can access our free candle files here:---->Serev3D Candle Holder Collection

▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️The Vecna Candle casts an ominous glow, channeling dark power for the ultimate creepy centerpiece.Included with Vecna Candle:🕯️Full single color version and multicolor version.🕯️Candle Holder (Fit regular size (36-40mm diameter) LED tealights inside)Recommendation for the candle:LED Tea Lights Candle pack

▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️

INFO:

Print difficulty level: Beginner

Recommended print settings: (If you use Bambu or Orca slicer, all the print settings are automatically loaded in each version's 3mf files)Layer height: 0.2mm , if you want finer details you can set it to 0.16 (Also you can turn on Adaptive Layer Height, if you want less visible layer lines on the top surfaces of your printWall loops: 3Infill: 10%, GyroidSupports: you can turn on Auto Tree support with a threshold angle of 30 degrees, TopZ Distance 0.28, BottomZ Distance 0.2, it will place a small amount of support under the chin part.

Print time: 2-3h

----------------------------

Resources to print without painting or post processing:

Dual silk filament: TEQStone Dual Color Silk PLA Black-Red

Gradient filament: iSANMATE Matte Gradient Red-orange------------------------------

Resources for painting and post processing:

Filament: Polymaker Matte Black PLA

Filler Primer: Rust-Oleum Filler and Sandable Primer Spray

Sandpaper: 3m Pro Grade Grit: 120, 3m Pro Grade Grit:220, 3M Wet or dry Sandpaper Grit: 600 and/or Bates- Sandpaper, 18 Pack, 12 Grits, 120 to 3000

Primer: Rust-Oleum Painter's Touch Spray Paint White

Paint: Fantastory Craft Acrylic Paint Set

Clear coat finish: Rust-Oleum Matte Clear Coat or if you want glossy look Rust-Oleum Clear Gloss

-----------------------------

Post-processing steps:

Sanding: Start with coarse sandpaper (120 grit) to smooth layer lines, then use finer grits (220) and lastly (400-600) for a more polished surface.

Filler Primer: Apply a filler primer coat to cover imperfections. Let it dry completely.

Wet Sanding: Use 400-600 grit sandpaper for wet sanding the primer, repeating as needed for smoothness.

Final Primer Coat: Apply a thin layer of regular primer to create an even base for painting.

Painting & Sealing: Paint with your chosen color from the acrylic paint set, then apply a clear coat (matte or glossy) for protection and finish. (Allow each layer to dry fully before moving to the next for the best results.)