RT-880 Channel/Group (Patreon)
Content
Wow, getting channels and groups going is linked to so many other functions: long presses, SPI storage, input modes (such as text) and the list goes on, I knew this kind of thing would be the case when rewriting things from the ground, but heck, it's quite brutal how much functionality is implicitly interlinked.
Getting close now, but I did want to drop the long press "shift" function. It was too clunky imo. With the 880 you have all buttons (except up and down), including both side buttons and emergency button which can be assigned long press functions, also both side buttons and the emergency button can be assigned short press functions too, so that's 20 user definable "button" functions.
I'm also wanting to include a user menu too. A menu category that the user can populate with favorite menu functions as well as long press functions too if wanted. But that's some time in the future.
In the coming release I have implemented a strategy for the SPI flash wear issue.
The Advanced menu allows you to set a SPI deferral time, this is by default set to 10 seconds. If you don't care about wear leveling too much, you may set this deferral time to something like 2 seconds, this will mean any changes will be quickly written to flash and you won't need to worry about it or bother with the "Shut Down" menu. If however you want to get the most out of the flash chip, you can set the deferral time to 250 (about 4 minutes) and make sure to use the "Shut Down" menu before turning off. A red triangle icon appears on the display when there are any pending flash writes, so never turn off the radio while this triangle is displayed.
Rough back of the envelope usage estimates suggest that daily use, with about 50 writes per day would give you around 5 years of life. So set these options based on your projected use. Think about how many times you will be changing group, changing channel, changing frequency. If you do a lot of scanning, every time the scanner stops to monitor, that will be a write as it's changing the active state of a VFO. So plan ahead a little.