Home Creators Posts Import Register Favorites Logout
haven't archived this post yet. have a subscription? use the importer!

Downloads

  • win-x86.zip
  • win-x64.zip
  • win-arm64.zip
  • linux-x64.zip
  • linux-arm64.zip
  • linux-arm.zip
  • extras.zip
  • nicfw880_BETA_05D.bin

Missing 1 full-res photo, 8 files, as this post has not yet been imported.

Content

Please review the previous releases notes as I'm not going to repeat everything here.

There are two new icons for APRS and GPS added. If you use a custom skin you'll need to adjust the positions of the icons. The skins in the extras.zip file have been updated.

GPS Icon

This icon has two states.

  • The dish pointing down means that GPS functionality is enabled, but no GPS lock is acquired.

  • The dish pointing up means GPS is enabled and locked.

APRS Additions

  • Beacon popup/browser now shows distance and heading.

  • The APRS Icon has two states
    ■ APRS means APRS decoding is enabled.
    ■ APRSX means APRS automatic beacons are active.

  • AX.25 Digipeater path added. Use "AX.25" in:
    Main Menu->APRS->Digipeater Path
    The default digipeater callsign is "ARISS" but this can be edited:
    Main Menu->APRS->AX.25 Digipeater

  • You may now select a specific VFO for automatic beacon APRS operation with:
    Main Menu->APRS->Use VFO
    When set, the VFO selected will display an Aprs icon. All automatic beacons will be sent via this VFO.
    This VFO will be muted if:
    Main Menu->APRS->Hear Tones
    is set to Off. A mute icon will also be shown on the VFO.
    Note that manual beacons and PTT beacons are always sent on the active VFO.

BETA 05A Update

  • Fixes the issue of the AX.25 Digipeater menu not saving changes.

BETA 05B Update

  • Fixes the minute miscalculation on received beacons.

  • Mutes the microphone during the initial pause when sending APRS beacons.

BETA 05C Update

  • Fixes the short audio burst after a received beacon when the VFO is assigned to APRS and muted.

  • Fix for the side buttons stopping working when squelch is open while APRS decoding is active. Note, this requires Main Menu -> APRS -> Use VFO to be set to A, B or C.
    Do not use squelch override on the VFO that's set for APRS

BETA 05D Update

  • Squelch override can no longer be activated on a VFO assigned to APRS use if Hear Tones is set to off.

  • Switching VFOs now cancels squelch override status. This is to prevent it carrying over to the APRS assigned VFO and locking the side buttons.

  • When squelch override is active the 'RX' that was shown in the signal bar areas now displays 'OV'

-- OSX RMS [CLICK HERE] --

Files

Previews only

Comments

Casey Yarborough

Curious as to how viable it would be to print squelch settings on the scope so we can visualize signals and our squelch?

nicsure

The scope uses fast signal acquire, the noise level at this point is not developed enough for any kind of squelch comparison. Basically it takes 20ms minimum after a signal is received or a frequency changed before any reading of RSSI or ExNoise can be used to determine squelch response. On the scope it's doing things way faster than that. If you're wondering how UltraScan does it, answer is it doesn't. Ultra scan is a sigal rejection system, any signals that "might" be valid it waits the full 20ms to check, on the scope that kind of logic isn't viable.

Graham

Has anyone got a UK codeplug for this firmware please. Excellent work