Fro-yo Cone with Stand - Clicker (Patreon)

Fro-yo Cone Fidget Clickers take me back to sweet moments of childhood nostalgia. Just like fro-yo is loved by everyone, these playful clickers are perfect for all ages.They come with a stand, plus the option to add magnets for an extra dose of fun fidgeting.You can download the .3mf file from here (under welcomepacks)Important : Read Before Printing

For the best possible results with your finished clicker, strong bed adhesion is essential. We recommend thoroughly cleaning your print surface—whether that’s with soap and water or following your printer manufacturer's specific guidelines—before getting started.

Compatible only with 8x3 Neodymium craft magnets you can buy from HERE . Use superglue to secure the magnets in place. One magnet below the cone and one magnet inside the cavity of the stand. (represented in the picture above)

Any Cherry MX Compatible Mechanical Keyboard Switches are compatible.You would need to Bend or Clip the Metal Contacts below the switches with pliers. (Only then the switches latch flush onto the base of the clicker)

Print the cap facing "up" like in the picture provided.

3D Printing Settings:

Layer Height: 0.2mm (recommended)

External Perimeter (Outer Wall): 0.33mm (recommended)

First Layer Extrusion Width (Initial Layer Line Width): 0.35mm (recommended)

Only one wall on first layer: True (recommended)

CLICKER INFO Any Cherry MX Compatible Mechanical Keyboard Switches are compatible.You would need to Bend or Clip the Metal Contacts below with pliers TESTED Switches. Kailh Box Thick Clicky Jade Switch Cherry MX Blues/ Reds / Browns Gatreon Yellow Linear SwitchesGlorious Panda Yellow Tactile Switches   Filaments Used:Polymaker PLA - Matte Peanut (for the cone)Polymaker PLA - Various Matte Colors for others.