Home Creators Posts Import Register Favorites Logout

Content

Hey Clicky Friends! πŸ’›

Bath time just got even cuter! 🫧✨

After our Piggy Bath, we couldn't resist bringing a few more adorable friends to the tub. Meet the Bath Friends Collection, featuring a sweet little puppy and kitten enjoying their own cozy bubble baths! πŸΆπŸ±πŸ’•

And of course, our tiny duck friends are back too! Each character comes in two versions, so you can choose a simple bubble bath or add the little ducks to complete the scene. πŸ₯🫧

πŸ“₯ Download the Collection

πŸ‘‰ Click here to download Bath Friends Collection
πŸ”’ (Available for active patrons only)

⚠️ To make the clickers work, you'll need a mechanical keyboard switch (MX-style).
The switch is not included in the files.

πŸ› What's Included?

This release includes:

🐢 Puppy Bath
🐢πŸ₯ Puppy Bath with Ducks

🐱 Kitten Bath
🐱πŸ₯ Kitten Bath with Ducks

πŸ› Bathtub Base
πŸ₯ Little Ducks

Choose your favorite character and decide whether they're having a quiet bubble bath or sharing the tub with their tiny duck friends! πŸ«§πŸ’›

No resizing needed β€” all parts are ready to print at their original size.

🎨 Color Suggestions

Have fun creating completely different bathrooms for each little friend! ✨

Pastel blues, pinks, greens, and creams look adorable for the bathtub, while white bubbles and bright yellow ducks add a classic bath-time touch.

You can also customize the puppy and kitten with your favorite colors β€” or even try matching them to a special pet! πŸΆπŸ±πŸ’•

Thank you for supporting another CuteClick release! πŸ’›

We had so much fun expanding our little bath-time world, and we hope you enjoy having these new friends alongside Piggy Bath.

We can't wait to see which Bath Friend you print first! πŸ›πŸΆπŸ±πŸ₯✨

With love,
CuteClick πŸ’›

Files

Comments

Bee

very cute

μ†Œλ‹€ 미였

Thank you, author. ❀❀❀❀❀❀❀❀ It's so cute and I love it so much.

Print Forge

Got this printing the bath tub this morning on p1s

Cute Click

Hi! From the photo, it looks like something may have come loose during the print. We didn't have any issues when printing the bathtub ourselves, although we haven't printed a large number of them yet. Based on what we can see, it seems more likely to be a bed adhesion issue rather than an issue with the file. One thing we always do is lower the first layer speed to help ensure better adhesion. We'd also recommend giving the build plate a good clean before trying again. If it still happens in the same area, please let us know and we'll take a closer look at the file too! πŸ’›

Edwin

I have been trying the bathtub all morning. 3 different printers(p2s), all new cool track plates from bambu. Lowered the first layer speed. Placed the tub on different spots on the plate...every time it does not adhesive to the bed. No problems with these plates untill this tub...any suggestions?

Cute Click

Hi! 😊 Just to make sure, are you having the adhesion problem with the bathtub itself, or with one of the little animals? We haven't had any adhesion issues with the bathtub in our prints, and the model doesn't have any extremely thin areas touching the build plate that should make adhesion particularly difficult. A couple of things you could try: first, give the plate a good clean with isopropyl alcohol. If that doesn't help, you can try washing it with water and dish soap β€” that's something we occasionally do when nothing else seems to solve an adhesion issue. One other setting we just remembered: you can try setting the Initial Layer Line Width to 0.35 mm. That's the setting we normally use here, along with reducing the first layer speed. Let us know if it's the bathtub or the animals that are failing, and we can try to narrow it down from there! πŸ’›

Edwin

Tried all different settings but still no succes. Now i printed with a different color pla and after raising te heatbed temperature to 55(it was set on 40 for a cooltrack plate in the file) succes!!

Cute Click

That's great! 😊 We're really glad you got it to print successfully! Thank you for letting us know what worked for you too. If you ever run into any other issues or need help with anything, feel free to message us anytime and we'll be happy to help!

Print Forge

Definitely not a bed adhesive issue. If you look in the picture the first 10 layers look fine. Then it stops and gets stringy. Printed a bunch of clickers after trying this and no issues. So in my conclusion its the file. This was the first file i was going to print from your subscription and i had problems. I have 9 printers and print a lot and only had this issue with your file.