💖Monday MagBuddy Drop! Chicken🐔 + Ladybug 🐞😄(Archived) (Patreon)

Please enjoy these two new cute MagBuddies! 🥰

As always, thank you so much for being here and supporting 3D Misfits! Feel free to share your prints, ask questions, or hang out in the chat rooms anytime — we love seeing what everyone creates.

Happy Printing! 🖨️

🧲Magnet Placement Pause

These prints include a pause for inserting 8×2mm round magnets.These are the ones we use→ https://amzn.to/46b4go9If you prefer no magnets, simply delete the pause and let it run through!

Printers Used:Bambu Lab A1, A1 MINI / P1 Series

Snapmaker U1/Creator 5: While we print with these purgeless printers, all files are saved as a Bambu files and individual settings may need to be manually entered for other Orca slicers. Subject to change in the future.

Material: PLA

Filament Used:

LadyBug: https://amzn.to/3Q3CzsQ

⚙ Quality

• Layer Height: 0.12mm... The smaller the layer height, the higher the quality. This is your choice. We use .12 to .16 99% of the time.

💪 Strength

• Walls: 3• Infill: 10%• Pattern: Gyroid

🚀 Speed

• Outer Wall: 80 mm/s• Inner Wall: 100 mm/s• Sparse Infill: 200 mm/s• Internal Solid Fill: 200 mm/s

*Top Surface: 100mm/s if using silk filament; otherwise 150 to 200 is good• Overhang Speeds: 20 / 20 / 20

🌳 Supports

• Type: Tree• Style: Default• Support Angle: 20 for Lady Bug, 25 for Chicken• On Build Plate Only: Yes-->> Critical for supports to NOT fill your magnet hole• Top Z Distance: 0.24• Bottom Z Distance: 0.24• Base Pattern: Hollow

🔧 Other Settings

• No Brim• Purge into Object Support: No• Flush Multiplier: 1.3x

💖 All settings are suggestions.

These are the settings I personally use and recommend to achieve the quality shown in my photos. However, every printer and user is different, so feel free to modify them as needed to best fit your setup and printing preferences.

💬 LicensingThese files include a commercial license for active 3D Misfits patrons. You may print and sell physical items. Redistribution, reselling, or sharing of STL files is strictly prohibited.