🩷Monday MagBuddy Drop! Swamp Creature, Reaper & Ghost !👻(Archived) (Patreon)

🚨 This model is now ARCHIVED and no longer available for download.

Three new Halloween Magbuddies just joined our monster squad!

Say hello to Ghosty, Swamp Creature, and Reaper, all live now.

If you're a free member:All three live inside the Seller Tier, right alongside the Frankie and Bride collection and the full welcome pack you get the moment you join — 20+ ready-to-print MagBuddies to start your collection. You also get a new drop every Monday, the commercial license, and one-on-one help if you ever need me. If you're planning a Halloween table this year, now's the window to get inside and start printing.

If you're already a member:They're ready for you — go grab all three. Print them solo, print them as a set — they look great lined up together, and they slot right into the rest of the monster lineup you've been building this season. These ghosts would be awesome in glow filament, or a glow reaper face-lot's of fun ideas come to mind and they round out the monster crew nicely for anyone stocking up for October markets.

As always, the settings are below!

See you Monday for the next MagBuddy™ drop! Happy Printing Everyone! 💛

🧲Magnet Placement Pause

These prints include a pause for inserting 8×2mm round magnets. These are the ones we use→ https://amzn.to/46b4go9🩷If you prefer no magnets, simply delete the pause and let it run through!

Printers Used:Bambu Lab A1, A1 MINI / P1 Series

Snapmaker U1/Creator 5: While we print with these purgeless printers, all files are saved as a Bambu files and individual settings may need to be manually entered for other Orca slicers. However we have zero issues opening these files on our own Orca slicers so if you ever come across any issues please feel free to reach out.

Material: PLA

🎨Filament Used:

Swamp Creature: https://amzn.to/4bVecoZ

⚙ Quality

• Layer Height: 0.12mm... (The smaller the layer height, the higher the quality. This is your choice. We use .12 to .16, 99% of the time). **Ghost: .20 or better👻

💪 Strength

• Walls: 3• Infill: 9% **Ghost: 6%👻• Pattern: Gyroid

🚀 Speed

• Outer Wall: 200mm/s• Inner Wall: 200 mm/s• Sparse Infill: 200 mm/s• Internal Solid Fill: 200 mm/s

*Top Surface: 200mm/s (100 if using silk filament); otherwise 150 to 200 is good• Overhang Speeds: 20 / 20 / 20

🌳 Supports

• Type: Tree• Style: Default• Support Angle: 10• On Build Plate Only: Yes-->> Critical for supports to NOT fill your magnet hole• Top Z Distance: 0.28• Bottom Z Distance: 0.28• Base Pattern: Hollow

🔧 Other Settings

• No Brim• Purge into Object Support: No• Flush Multiplier: 1.3x

💖 All settings are suggestions.

These are the settings I personally use and recommend to achieve the quality shown in my photos. However, every printer and user is different, so feel free to modify them as needed to best fit your setup and printing preferences.

💬 LicensingThese files include a commercial license for active 3D Misfits patrons. You may print and sell physical items. Redistribution, reselling, or sharing of STL files is strictly prohibited.