Monday Magbuddy Drop! Chibi Zombie🧟(archived) (Patreon)

🚨 This model is now ARCHIVED and no longer available for download.

Coming to Cults3D Soon!

🧟‍♂️ Meet the Chibi Zombie MagBuddy™!

He may be missing a little brain matter… but he definitely isn’t missing any personality. 😂💚

Our newest spooky little misfit is crawling into the collection with his oversized zombie feet, exposed brain, tattered clothes, and perfectly pathetic little undead expression. He’s creepy, cute, and just the right amount of ridiculous.

Perfect for Halloween displays, spooky season markets, or anyone who likes their zombies a little more adorable than terrifying. 🎃

As always settings and any new changes are marked down below!

Happy Printing Everyone!🩷

***Chibi Zombie is CHUNKY and using 2 magnets is recommended. If you only use 1, reduce infill to 6%***

🧲Magnet Placement Pause

These prints include a pause for inserting 8×2mm round magnets. These are the ones we use→ https://amzn.to/46b4go9🩷If you prefer no magnets, simply delete the pause and let it run through!

Printers Used:Bambu Lab A1, A1 MINI / P1 Series

Snapmaker U1/Creator 5: While we print with these purgeless printers, all files are saved as a Bambu files and individual settings may need to be manually entered for other Orca slicers. However we have zero issues opening these files on our own Orca slicers so if you ever come across any issues please feel free to reach out.

Material: PLA

🎨Filament Used:

Zombie skin: https://amzn.to/4xprV00

⚙ Quality

• Layer Height: 0.12mm... (The smaller the layer height, the higher the quality. This is your choice. We use .12 to .16, 99% of the time). **Printing Zombie at .18 will save time and result in a "fuzzier" skin for his undead look. The photo is printed at .12mm

💪 Strength

• Walls: 3• Infill: 9% (Suggest lowering this to 6% if you decide to use only 1 magnet vs 2)• Pattern: Gyroid

🚀 Speed

• Outer Wall: 200mm/s• Inner Wall: 200 mm/s• Sparse Infill: 200 mm/s• Internal Solid Fill: 200 mm/s

*Top Surface: 200mm/s (100 if using silk filament); otherwise 150 to 200 is good• Overhang Speeds: 20 / 20 / 20

🌳 Supports

• Type: Tree• Style: Default• Support Angle: 10• On Build Plate Only: Yes-->> Critical for supports to NOT fill your magnet hole• Top Z Distance: 0.28• Bottom Z Distance: 0.28• Base Pattern: Hollow

🔧 Other Settings

• No Brim• Purge into Object Support: No• Flush Multiplier: 1.3x

💖 All settings are suggestions.

These are the settings I personally use and recommend to achieve the quality shown in my photos. However, every printer and user is different, so feel free to modify them as needed to best fit your setup and printing preferences.

💬 LicensingThese files include a commercial license for active 3D Misfits patrons. You may print and sell physical items. Redistribution, reselling, or sharing of STL files is strictly prohibited.