🩷Monday MagBuddy Drop! Werewolf is here! 🐺🌙(archived) (Patreon)

🚨 This model is now ARCHIVED and no longer available for download.

Meet our Werewolf MagBuddy! This little monster is ready to howl his way into your Halloween collection!🎃

As always, thank you for supporting 3D Misfits and helping me keep these weird (but awesome) little chibi creatures coming! 💜😄

Happy printing!

🧲Magnet Placement Pause

These prints include a pause for inserting 8×2mm round magnets. These are the ones we use→ https://amzn.to/46b4go9🩷If you prefer no magnets, simply delete the pause and let it run through!

🎨Filament Used:

Werewolf Clothes: Insologic red blue silk https://link.amazon/B04BHnIuO

⚙ Quality

• Layer Height: 0.16mm... (The smaller the layer height, the higher the quality. This is your choice. We use .12 to .16, 99% of the time, if you want to save time, make this number BIGGER). I don't recommend anything over .2 for these models.

💪 Strength

• Walls: 3• Infill: 10%• Pattern: Gyroid

🚀 Speed

• Outer Wall: 200mm/s• Inner Wall: 200 mm/s• Sparse Infill: 200 mm/s• Internal Solid Fill: 200 mm/s

*Top Surface: 200mm/s (100 if using silk filament); otherwise 150 to 200 is good• Overhang Speeds: 20 / 20 / 20

🌳 Supports

• Type: Tree• Style: Default• Support Angle: 10• On Build Plate Only: Yes-->> Critical for supports to NOT fill your magnet hole• Top Z Distance: 0.28• Bottom Z Distance: 0.28• Base Pattern: Hollow

🔧 Other Settings

• No Brim• Purge into Object Support: No• Flush Multiplier: 1.3x

💖 All settings are suggestions.

These are the settings I personally use and recommend to achieve the quality shown in my photos. However, every printer and user is different, so feel free to modify them as needed to best fit your setup and printing preferences.

💬 LicensingThese files include a commercial license for active 3D Misfits patrons. You may print and sell physical items. Redistribution, reselling, or sharing of STL files is strictly prohibited.