Home Creators Posts Import Register Favorites Logout

Downloads

Content

He showed up in his best Pilgrim hat… and he is VERY confident he's a guest at this dinner, not the main course. 😅🦃

Meet our Pilgrim Turkey MagBuddy! He's got chocolate-brown scalloped feathers, a fanned-out tail, a shiny orange beak, little golden feet, and a tall buckled hat he refuses to take off. With those big round eyes, he is way too cute to be on anyone's menu.

He's the perfect little guest to sit on your table, fridge or shelf all through turkey season. 🍁

Who's saving this little guy a seat at the table this year? 👀

Happy printing! 🍂✨

🧲Magnet Placement Pause

These prints include a pause for inserting 8×2mm round magnets.

These are the ones we use→ https://amzn.to/46b4go9

🩷If you prefer no magnets, simply delete the pause and let it run through!

🎨FILAMENT:

Beak/feet: Jayo Red Gold Silk: https://link.amazon/B081tD32T

⚙ Quality

• Layer Height: 0.16mm... (The smaller the layer height, the higher the quality. This is your choice. We use .12 to .16, 99% of the time, if you want to save time, make this number BIGGER). I don't recommend anything over .2 for these models.

💪 Strength

• Walls: 3

• Infill: 9%

• Pattern: Gyroid

🚀 Speed

• Outer Wall: 200mm/s

• Inner Wall: 200 mm/s

• Sparse Infill: 200 mm/s

• Internal Solid Fill: 200 mm/s

*Top Surface: 200mm/s (100 if using silk filament); otherwise 150 to 200 is good

• Overhang Speeds: 20 / 20 / 20

🌳 Supports

• Type: Tree

• Style: Default

• Support Angle: 10

• On Build Plate Only: Yes-->> Critical for supports to NOT fill your magnet hole

• Top Z Distance: 0.28

• Bottom Z Distance: 0.28

• Base Pattern: Hollow

🔧 Other Settings

• No Brim

• Purge into Object Support: No

• Flush Multiplier: 1.3x

💖 All settings are suggestions.

These are the settings I personally use and recommend to achieve the quality shown in my photos. However, every printer and user is different, so feel free to modify them as needed to best fit your setup and printing preferences.

💬 Licensing

These files include a commercial license for active 3D Misfits patrons. You may print and sell physical items. Redistribution, reselling, or sharing of the digital files (3MF or any other model files) is strictly prohibited.

Files

Comments

jax

What size magnet do we use on these again please

3D Misfits

We use 8*2mm, all settings are written on the post including a link to the specific magnets we use.

jax

Thanks I saw but was sure if it was 2 *8mm or 8*2mm

Ken

Do you have a filament brand/color recommendation for the other colors?

3D Misfits

We actually used Ziro castle brick as an experiment and he came out all brown. He'd be cute any shade brown and most brands are fine on Amazon with good reviews

Ken

Thanks! Do you have brands you like? I've only stuck with BambuLabs filament so far.

3D Misfits

I use most every brand Except Bambu 😁 Sunlu and Insologic are top notch for me for silks and basics. Other great brands are Polymaker, 3Dhojor, Ziro, Amolen, Flashforge. Many filaments are the same brand under different names I cant keep track at this point. Hope that helps! Black friday is coming up a great time to try some new stuff 😀

Ken

Thanks so much!!