Home Creators Posts Import Register Favorites Logout
haven't archived this post yet. have a subscription? use the importer!

Content

My DaVinci 1.0  cranks out a print, that I sell through a 3rd party, 24 hours a day. Well that much use caught up with it. The printer midway through a print stopped extruding plastic. It would happen at various times and if I pushed the filament just a little before it entered the extruder, it started working again. After many attempts at cleaning the nozzle and gear, I noticed the idler wheel that is spring loaded and keeps the filament against the gear, was loose.

The idler wheel just slides over a shaft and it's not a bearing, its just an aluminum wheel with a center hub. The hub wore out as you can see in the picture (right side). I stole one from my 1.0A (left side) that isn't working right now and compared. The hole on the original is clearly wore out. It was wobbling so much, the filament would just pull away from the gear and stop extruding.


A little C-clip holds it in place so I removed that, replaced the wheel, re-clipped it on and the printer has been printing fine ever since. I don't know how to get a replacement and I really don't want to deal with XYZprinting but I may not have a choice. I may try to 3D print something in carbon fiber filament that Roy Olmstead donated to the channel. I wonder how long that would last?

Files

Previews only

Comments

Anonymous

Hi Chuck, I have an idea, Get an 5mm Hobb-Goblin and replace the gear on the stepper motor, then you can buy a replacement bearing with the right size hole and replace the idler. It should then last much much longer. You should ask E3d to sponser you the parts.

elproducts

I want to keep this one stock. I'm looking at making the second 1.0 repetier and then the 1.0A possibly put in an MK8 extruder. When I can find the time.