ROBO3D Success! (Patreon)
Published:
2016-06-26 04:06:34
Imported:
2026-06
haven't archived this post yet. have a subscription? use the importer!
Content
Thanks to all the suggestions on this print for the ROBO3D. Michelle Creel asked for settings and I've been struggling a bit on the ROBO3D so I asked others to chime in. Robert Forman, Gary Boyce and Neil Phillips all sent me pictures of their prints and their detailed settings. I was able to piece them together to get a good print. The bridging actually looks better than the picture shows. Strange lighting effect. I can probably increase retraction a bit. I dropped from 0.1 layer to 0.2. I mostly followed Robert's settings with some added inputs from Gary and Neil.
Here are the settings I used in Simplify3D:
225c, Bed 70c, Extrusion Multiplier 0.95, Extrusion Width Auto 0.48, Layer 0.2,
4 Top 4 Bottom 2 Shells, 1st Layer Height 100% ,1st Layer Width 85%,1st Layer Speed 30%, Infill Rectilinear 20%, Outline Overlap 50%, Extrusion Width 100%,
Retraction 1.00mm, Speed 3600mm/s. MatterHackers Pro PLA Grey. A little glue on the bed. I also had to offset Z axis 1.00 mm to work with the auto-leveling.
I want to drop to 215c and increase retraction from 1.00mm to 2.00 mm, increase Top Layers to 6 and slow it down to 3000mm/s as a next step.
Files
Previews only