Major Shift (Patreon)
Content
Then my second stock DaVinci caught the flu from my sons machine and decided to not extrude plastic at all. Finally my original stock DaVinci which has been running great for a long time, didn't want to be left out so it suddenly developed a terrible shifting problem.
I went to work all evening Monday and Tuesday. I fixed my sons first. It was a broken wire near a tie strap. It flexed too many times. Easy fix per my #0011 video.
Next, the shifting problem as seen in the picture. It was only shifting in the X direction so that told me probably the X-stepper motor wiring was broken. Sure enough it was the blue wire again. I've fixed three of these so far and it's always seems to be the blue wire. This video has those directions.
The last one was a bugger. The idler wheel for the extruder was loose. I've had this before and replaced it with a better one I received from Roy Olmstead. He converted his DaVinci to a better hotend and sent me the left over parts. This time I didn't have a replacement.
I went shopping at my local hardware store and found a nylon bushing that fit the idler shaft perfectly. I then drilled out the aluminum idler wheel to fit over the bushing and epoxied them together. I installed the wheel and it worked great. But then I found the nozzle was also jammed with old plastic. I ended up completely tearing apart the hotend and drilling out old plastic. I also had to heat it up and use a 0.4mm drill to clean out the remaining tip. These DaVinci hotends are not designed to be easily taken apart.
That was it and they are all back in action running off a reset cartridge. So with life back to normal here, I'm now trying to catch up on prints I need to ship and to get Filament Friday completed. This really put me behind. I may make the idler wheel a Filament Friday video since I video taped some of it. It was an interesting project I'm sure others will benefit from.
Files
Previews only