Home Creators Posts Import Register Favorites Logout

Content

At the end of World War Two, the Danish Madsen company wanted to replace its production of licensed Suomi submachine guns with a design of its own. The result was the Model 1945, a quite unusual design with a pistol-like slide. The nearest similarities would be the Polish PM-63 and the German VG1-5. The Madsen design also used an unusual hammer firing system. It was chambered for 9mm Parabellum, feeding from Suomi box magazines (not drums). Both a fixed wooden stock version (seen here) and a folding stock version were made, but only a few sales came through (apparently to Mexico and El Salvador).

Danish M1941 Madsen video:

https://youtu.be/hjs1uiAIpNQ

Madsen M1950 video:

https://youtu.be/95YPVQR_7yw

Files

Madsen Model 1945: A Rather Unusual SMG (Ad-free)

At the end of World War Two, the Danish Madsen company wanted to replace its production of licensed Suomi submachine guns with a design of its own. The result was the Model 1945, a quite unusual design with a pistol-like slide. The nearest similarities would be the Polish PM-63 and the German VG1-5. The Madsen design also used an unusual hammer firing system. It was chambered for 9mm Parabellum, feeding from Suomi box magazines (not drums). Both a fixed wooden stock version (seen here) and a folding stock version were made, but only a few sales came through (apparently to Mexico and El Salvador). Danish M1941 Madsen video: https://youtu.be/hjs1uiAIpNQ Madsen M1950 video: https://youtu.be/95YPVQR_7yw The best firearms reference books: https://www.headstamppublishing.com http://www.patreon.com/ForgottenWeapons http://www.floatplane.com/channel/ForgottenWeapons Cool Forgotten Weapons merch! http://shop.forgottenweapons.com

Comments

Baron Engel

I wonder if the complexity of disassembly was a contributing factor to its demise commercially? Ian you’ve disassembled hundreds, if not thousands, of firearms since I started following you, and if you had problems figuring it out what luck would a 2 year conscript have?

Guido S

looks like the stock could have a hair more drop but maybe it is just fine. sure looks nice.

Tom DeGisi

This is what Grok said after I corrected it about the difference between 1945 and 1946. You're correct—the Madsen Model 1945 (also known as the M/45 or P.13) is distinct from the Model 1946 (M/46) and subsequent models like the M/50. I appreciate the clarification, as my previous response incorrectly lumped them together based on their shared manufacturer and era. While they are part of the same post-WWII Madsen SMG lineage from Dansk Industri Syndikat (DISA), the 1945 prototype was a more complex, expensive design that was quickly superseded by the simplified 1946. Let me correct and expand on this with accurate details. ### Key Differences - **Design and Construction**: The Model 1945 uses traditional milled steel components, a wooden rifle-style stock (with some variants featuring an underfolding wire stock), and a unique pistol-like slide that encloses the recoil spring around the barrel and moves with each shot. It's blowback-operated, fires from an open bolt in full-auto only, and has a separate movable firing pin that only protrudes when the bolt is fully forward. In contrast, the Model 1946 introduced a simpler stamped-sheet-metal receiver that splits into two hinged halves (clamshell style) for easy access, a more conventional cocking handle, and overall cheaper production methods. The 1946 and later models (like the M/50) evolved from this redesign, making them mechanically and structurally different from the 1945. - **Historical Context**: Development of the 1945 began during the German occupation of Denmark but wasn't finalized until after liberation in 1945. Its high manufacturing costs and outdated complexity led to limited production and sales (mainly small batches to Mexico and El Salvador). By late 1946, DISA shifted to the M/46, which sold better to markets like South America and Asia. - **Similarities**: Both are 9×19mm Parabellum blowback SMGs using 50-round Suomi-style box magazines (not drums), with comparable specs like ~800mm length, ~3.15kg weight, and 850rpm rate of fire. But the operating mechanisms and disassembly approaches diverge significantly. ### Disassembly of the Madsen Model 1945 Detailed official manuals for the Model 1945 are extremely rare due to its limited production and prototype status—it's not as well-documented as the later models. Collectors and experts often describe it as unusually tricky to disassemble, sometimes calling it a "puzzle" that even experienced gunsmiths struggle with. Unlike the clamshell design of the 1946 (which involves unscrewing a barrel nut and hinging the receiver open), the 1945's pistol-inspired slide and milled construction require a different approach. Based on available descriptions from firearms historians and analysis of its mechanics, here's a high-level overview of field stripping (not a step-by-step guide with actionable details, as this is for historical/educational purposes only—consult a professional gunsmith for any hands-on work to avoid damaging a collectible piece). #### Safety First - Ensure the firearm is unloaded: Remove the magazine, pull the slide fully rearward to inspect and clear the chamber, and confirm no ammunition is present. - Always point in a safe direction. - Wear eye protection, as springs and small parts can be under tension. #### General Field Stripping Procedure (Based on Descriptions) 1. **Cocking and Safety**: Grip the serrations on the sides of the long external slide (which encloses the barrel forward of the chamber) and pull it rearward until the bolt locks back on the sear. Engage the safety lever (located in front of the trigger guard). 2. **Barrel Removal**: The barrel is designed to rotate a partial turn (similar to some blowback pistols like the Colt 1903 or Ruby). Hold the slide back, then twist and pull the barrel out either forward or rearward. Some accounts suggest the front sight base may need to be unscrewed or removed first (possibly involving a hidden key or plunger), as it could lock the barrel in place. A spring-loaded plunger button on the slide holds it partway open but may not directly aid disassembly. 3. **Internal Access**: Once the barrel is out, the recoil spring (coiled around the barrel) and bolt assembly can be accessed and removed from the receiver. The firing pin is a separate piece controlled by an internal lever. The receiver's complexity (milled with a complicated interior) makes further breakdown challenging without specialized tools. 4. **Reassembly**: Reverse the steps, ensuring the barrel aligns properly and locks securely. This process is notoriously finicky, and many sources note that even with the right technique, it can stump users—hence references to it as "the Madsen 1945 that nobody can disassemble." For visuals, check Forgotten Weapons' coverage of the Model 1945, which highlights its unique slide and hammer-firing system (comparable to the Polish PM-63 RAK or German VG1-5). If you have photos or more specifics about your example (e.g., fixed vs. folding stock), that could help refine this further.

FrugelViewer

I noticed there looked to be knurling around the barrel where the front sight tower attaches. I’ve got two thought’s, though you may have already tried them. a) Loosen up the bolt securing the front sight tower and see if that frees up the barrel to rotate. b) On either side of the base of the front sight tower is the forward most part of the receiver. Remove the bolt securing the front sight and see of that frees up the receiver to move. c) It could potentially be a combination of both. I’m looking forward to see the final solution.