Home Creators Posts Import Register Favorites Logout

Content

James Warner was a gunsmith and owner of the Springfield Arms Company. In the 1850s he produced a series of revolving rifle designs which are interesting, but poorly documented. Only a few hundred of each were made (at most) and they appear to have begun as with a design intended to sell when Colt’s patent was supposed to expire. This used a single-action mechanism with an open frame, and had to be changed when Colt was able to extend his patent. A new model followed which was much simpler, probably trying to compete on price since the patented elements remained protected.

This simpler system was manually indexed and used a simpler receiver and side plate design than before. It also eliminated extraneous features like the loading lever. These are all roughly .40 caliber, six-shot guns and usually have 22-23 inch barrels (this example was shortened at some point).

A final change in design took place around 1856 when Warner moved to an enclosed frame design, before moving away from revolving rifle designs entirely. There are a few records of Warner revolver rifles in the Civil War, and these were most likely the latter enclosed frame type.

Video on Warner’s single-shot breechloading carbine from the Civil War:

https://youtu.be/C7lIjY-UYZU

Files

Simplified Warner Revolving Rifle: Caught by Colt’s Patent (Ad-free)

James Warner was a gunsmith and owner of the Springfield Arms Company. In the 1850s he produced a series of revolving rifle designs which are interesting, but poorly documented. Only a few hundred of each were made (at most) and they appear to have begun as with a design intended to sell when Colt’s patent was supposed to expire. This used a single-action mechanism with an open frame, and had to be changed when Colt was able to extend his patent. A new model followed which was much simpler, probably trying to compete on price since the patented elements remained protected. This simpler system was manually indexed and used a simpler receiver and side plate design than before. It also eliminated extraneous features like the loading lever. These are all roughly .40 caliber, six-shot guns and usually have 22-23 inch barrels (this example was shortened at some point). A final change in design took place around 1856 when Warner moved to an enclosed frame design, before moving away from revolving rifle designs entirely. There are a few records of Warner revolver rifles in the Civil War, and these were most likely the latter enclosed frame type. Video on Warner’s single-shot breechloading carbine from the Civil War: https://youtu.be/C7lIjY-UYZU The best firearms reference books: https://www.headstamppublishing.com http://www.patreon.com/ForgottenWeapons http://www.floatplane.com/channel/ForgottenWeapons Cool Forgotten Weapons merch! http://shop.forgottenweapons.com

Comments

Bruce Brodnax

For the record, the ring around the cylinder at the nipples was almost certainly turned on a lathe: it is possible it was milled, but it would take too much time, have a harder setup and be too prone to getting out of alignment from one operation to the next. Easier to make a pot chuck [fixture] and cut a slew of them at once as a single operation and move on to the next [drilling and tapping the holes for the nipples, most likely.]