Creating the Head Mounted Neural Interface. (Patreon)
Content
I, for the longest, time wanted to step-up the level of Sci-fi in my videos and had the image of a giant trunk of cables protruding from my head as an awesome visual starting point for this.
My initial visual reference for how I wanted my channel to look was based off of the art of DeathBurger on instagram. His work just captured this amazing feeling of this cluttered cyberpunk future that I think fit well with the idea of a collector of old relics who talks about them into the void.
This was the image that originally inspired my thought processes for my current setup.
Due to limitations in budget and time, my set ended up the way it is based purely off of what I had lying around in my basement. However, I still wanted to augment my physical appearance.
I came across another piece by DeathBurger, by chance, as it happened to be an alternate cover of one of my favorite books, Neuromancer.
Can you spot the resemblance?
I've been in the custom/replica Lightsaber community for a while and really love to try and make an exact replica of something. Due to time constraints and just wanting to have a clearer path ahead of me, I set about replicating the mask from this illustration, instead of designing something from scratch (which I still plan to do).
I use Fusion360 to design for 3D printing and machining, and got to work modeling the mask and helmet based off of the illustration.
Some of the proportions of the original illustration didn't quite make it to my physical prop as I based the mask portion around an existing face pad from a VR headset. Also my CAD skills aren't perfect so I had to take some liberties with the helmet as well.
First print of the face mask and ear lobe after sanding. so. much. sanding...
I have been collecting junk cables for a while. Laying them out to see which ones would work best and then modeling in receiving ends into the helmet portion.
Hand-drawing in the cables to get a feel for the overall look before committing.
And the rest is printed. Total print time was around 80 Hours. Time to sand! Does anyone like sanding? No? Me neither.
Test fitting most of the cables. I had to strategically place load bearing cables as the mask is actually hung from a bar above my head and it lightly rests on my head. It's super uncomfortable still.
After sanding for approximately 4298572913273298249827817391 years, its time to prime with a filler primer to fill in any spots left over that didn't get sanded completely
The first base coat going down. I was using a special metalized lacquer by Alclad that required a glossy black base coat to give it the correct metal appearance. I'm painting in my super professional painting booth, while watching my all-time favorite youtube channel, Adventure Archives.
First coat of the Alclad Aluminum lacquer. I Also added some darker spots (Alclad Jet Exhaust) to many of the ports and vents give a good base for weathering.
I also left some of the 3D printing lines visible on the front as I felt it gave it a bit more of a high-tech feeling of some advanced material, and because I hate sanding and knew I would be lighting it pretty dark.
I then dry brushed some scratches along most edges with a chrome.
And did the same to the helmet portion.
Then the helmet was washed with dark browns, greens, and blacks to give it an even more aged look, and then the rest of the accessories were glued into place.
My good friend Austin giving me a hand with the electronics.
This is the power board/brain of the mask. It runs off a small arduino based micro controller running WLED and controls a strip of NeoPixels
I didn't care too much how the inside looked and gave up making it look pretty. The LEDs are wrapped around the entire inside parameter, and frosted acrylic was placed over the openings to diffuse the light.
My original solution for seeing out of the mask was to mount this mirror for a Yashica TLR at a 45 degree angle and look out the top through a hole I designed in and mounting my camera monitor above my head. This ended up being pretty unwieldy and it turned out I can just see out by looking down past my nose at a monitor there.
IT'S ALIVE!
The aftermath of the wiring.
Final fitting on all of the cables.
With generous amounts of hot glue. This is what sits on my head, like I said, not comfy.
And after all of that you get this as the end result! If you know how to light things you don't need to be good at painting or sanding!
Thanks for reading through this! As I said I plan to make another headset in the near future as well as make more things on the channel as well too, in the Gx style.