Home Creators Posts Import Register Favorites Logout

Downloads

Content

🔅----[ INFO ]----🔅

B748 Genx Sound Pack For MSFS 2020/2024

🔅----[ What's inside ]----🔅

Genx Engine sounds

Cockpit & Cabin sounds : Battery , System , Avionics Fans , Cooling , controls

Ext Env :  Ground Roll , L-Gear Wind , Flaps/Spoilers Drag

Ext Systems : LGear Deploy , Flaps , APU , Hydraulics , Packs

Rain sounds :  Cockpit , Cabin & Exterior

Wind Sounds : High Air-Speed  & Exterior Gust

Warning sounds : Gpws , Alerts

🔅----[ New Changes ]----🔅

َCFG Upd (17/Feb/2026)

Sound Mod fixed of the MSFS2024 B747-8 Package

v1.24 (27/Jan/2026)

v1.23 (08/Oct/2022)

....

🔅----[ Notes ]----🔅

Asobo B747-8 MS2024 : All switches and alert sounds are now working 👍

🔅----[ Available Links ]----🔅

v1.24

For Asobo B747-8 (MSFS2024) : Download Link

Older Releases :

v1.23

For Salty (Dev) (MSFS2020)   : Download Link --- (Mega-nz)

For Salty (0.5.1) (MSFS2020) : Download Link --- (Mega-nz)

"Bank Angle" Warning Fix : Download 

v1.22

For Asobo B747-8 (MSFS2020) : Download Link --- (Mega-nz)

"Bank Angle" Warning Fix : Download 

Files

WwiseB748_Sp (FS2020)

B748 Genx Sound Pack for MSFS2020 Made with Wwise Studio

Comments

Charlie Wooding

I tried installing this but it makes the aircraft disappear in the selection menu. Not sure if this is common or whether there is something I'm doing wrong specifically to cause this

FTSim+

Salty Mod ? This is a problem of the "layout.json" file update . 👉 When updating manually , make sure to copy/paste the full parameter from the "INFO" file including the symbols "{" and "}," or try the Aut-updating by using the "build.py"

Dust Ninja

There seems to be an issue with the latest AAU2 update where you get bank angle warnings on turns where its not supposed to sound that warning. The default sounds dont have this behavior, is this something you could look into for the release of AAU2 when it should be going live by the end of the month?

Bill Alicea

Will there be an update for the Asobo version?

Rahul Kumar

Does this work for the AAU2 version of the 748?

Alex Pontiere

I'm about to try it out and will let you know!

Ioan Blidariu

needs updating, bank angle callout while following lnav

Chris D

Hey, this mostly seems to work for Asobo 748i (AAU2 update) but seems to be missing packs+recirc fan sounds, both in cockpit and window views. Would also be great if you could add fuelpump and hydraulic pump sounds :)

MADDOX Piloto

as an addition, the Master Warning for overspeed sound seems missing

wnsteven

None of the sounds work for me.

Ioan Blidariu

This soundset lacks insulation when main door is open, please fix. FSLTL can be heard at full volume from cockpit!

Wass Chehade

hi im trying to install the asobo version to the asobo 748 but there is no sounds

Asher Pramono

Could you update this to FS2024? I tried doing it with some success, only missing the cockpit switches sound.

Repcakssab

A lot of buttons and warnings sound missing. Can you update?

Samuel Bekoe

is there one for the super tanker?

Ching Nam Ip

May I ask whether the V1 callout and warning sound have been updated ? I am not sure whether I installed the sound pack correctly or not As the V1 callout and warning sound still sound the same as the default one

FTSim+

yes the Alert sounds are the default ones

FTSim+

will try again to remake the Sound Pack and enable custom warnings , (the first time didn't work)

Ching Nam Ip

thx for your hard work Look forward to another update

Kalum Ichimora

IDK what you changed but the startup sounds rather bad now

Timberolic

Sounds still bugged on the Asobo 748 - Flaps are default - Packs from both soundpack and default conflict - Landing gear sounds conflict - RA callouts are default and way too quiet

matt

This neds updating ! it doesn't work with the latest version

FTSim+

did you tried to re-install the sounds ?

matt

Yeah I did.

FTSim+

First i'll update my Fs2020 & will fix it in a few days

Gregory Lefebre

Yep, no sound inside for the 747 and C208 (last update)

FTSim+

re-install the sound.xml & run again the build.py file

Tom Roffe

deffo not working mate

Tom Roffe

installation guide isnt exacly brilliant

Tom Roffe

hi mate since downloading thanks for tutorial btw, but my rudder rt (xbox controler) also controls the pitch any ideas ? thanks

Tom Roffe

in the folder it makes my rudder control also handle the pitch

FTSim+

the sounds will not change any MSFS setting , and i can't help you here with this matter But !! try to reset your assigned controller buttons and make a new configuration also you can ask on "Discord" then you will find more help there

Tom Roffe

its since i installed the sound and the build.py file, before hand no issues

FTSim+

>> The "build.py" script is just a tool that read all the Available files names and copy them in a "registry" like file and it is named "layout.json" >> The "sounds" are just a sounds they wont change anything only the sounds 😁 try to to make a test flight without the sounds How to uninstall ? 1.delete the new "sound.xml" and "Asobo_B747_8i_Sp.PC.pck" 2. Restore the default "sound.xml" (*) 3. Run the "build.py" then Default sounds will be restored (*) if you do not have the original "sound.xml" you need to run the "build.py" first then let the MSFS check for update and then the missing file will be fixed

Kevin Jimenez

Hi does the current version work right now?

FTSim+

This will always work because it is not protected like the B787 also will re-upload it to be more simpler to install

Kevin Jimenez

Can confirm that it works. Love the engine sounds. But is there a way to lower the wind volume during flight? What values can we edit in the cfg sound file?

FTSim+

try to reduce the "ENVIRONMENT" volume , next update will set the wind noises to be controlled by "USER INTERFACE"

Orange Juice

Hey, followed the instructions multiples times and yet i still cannot get the sounds to work. Any help

Orange Juice

Followed this step by step multiple times, but it still doesnt work. The sound XML file shows that it is using the sound pack but there is still no sound. Ive completed restarted the process, had the default 747 sounds and followed the video exactly and still no engine sound, but i have the sound of the throttles moving

Orange Juice

Update: Got the sound pack to work but it doesnt work with Salty Simulations

Filip Bronola

Ah that's too bad, this has got to work with the Salty mod!

Kevin Jimenez

I use this sound mod with salty and it works everytime. Try removing salty first, install the sound pack, then reinstall salty.

FTSim+

Salty Mod ?? , Try using the new version

Filip Bronola

Salty sim is a group working to improve the default 747, similar to the fbw a32nx

LordP

i dont have a build.py file when i download the file as you wrote 1 week ago?

FTSim+

build.py file is not needed any more on the v1.63 , just extract and move "B748Genx_Sp" inside the "Community" folder

FTSim+

PS ; you need to restore default sound folder if you made a change before , if you did not !! then the sound will work fine

airifr

Tried 1.63 with Salty, doesn't work, default MSFS sounds..I also tried with 1.62 (build.py), doesn't work anymore on Salty, used to work before latest MSFS/Salty updates but no more. Need to talk to MSFS and or Salty to see how to fix.

FTSim+

🤷‍♂️ for now , but i've downloaded the Mod "Salty" and will check if the issue can be fixed

Ahmad Jamal

Bro can you please make the GPWS callouts in high quality like b787 ? that would be much more fun to fly.

FTSim+

Humm🤔 , will try some quick configurations , if not that accurate then will have to rework the sound Mode ( like the B787 ) but it will take some time

Chris

Any updates about this? I tried to find a workaround myself but no luck so far unfortunately.

FTSim+

v1.63 sounds working fine with the salty Mod installed !

Chris

thanks for looking into it

FTSim+

no sure what is the cause of your issue but try again to re-install the sound and Salty Mod

Chris

I figured out it works with the stable version of the salty mod. I was using the development version with which it doesn't work for some reason. So problem is solved and the sound pack is great. Thank you :)

airifr

Same here, using the dev version. Didn't realize this would make a difference? What the dev version has that makes the FTSim+ sounds inoperative?? Using the 8 days old dev version is preferred over the almost 2 months old stable version since it contains like it says on the tin the ongoing developments, which make the Salty 747 enjoyable to fly even better. For instance, the latest dev version contains IRS bug fix, which is not in the 2months old not yet updated stable version. So did FTSim+ just tried stable version then since working didn't bother looking into the dev version, so just use stable don't use dev, is that it? If the stable version doesn't get updated for another 6 months we would miss on 6 months dev updates because FTSim+ told us stable version works I tried it check my youtube video? We should be able to use FTSim+ sounds on Salty 747 regardless of stable or dev, no? Thank you.

FTSim+

sorry friend , didn't realize that the "Stable" release is outdated that why only tested the the sounds on it and also presuming everybody are not downloading the "Dev" version

FTSim+

will try it asap and check if anything can be fixed ✔

airifr

Understood! You're absolutely right, not everybody is using the dev version, and stable is behind. Salty team implements the changes in the devs then when they decide dev has enough changes and everything is correct they push them to the stable. So usually it takes several months..unless major changes come etc, you get the idea..

airifr

much appreciated! 👏👍

FTSim+

Salty Dev Release sound Fix #How To Use the Fix : 1/ install the full S-Pack 2/ Download this configuration ( extract & overwrite ) https://drive.google.com/file/d/18uDEIBNwTMM0alOsqAcZKzQhX7o-I1Sc/view?usp=sharing 3/ Delete the sound folder that is found inside : "salty-747\SimObjects\Airplanes\Asobo_B747_8i" 4/ update the "layout.json" file of the "salty-747" using "MSFSLayoutGenerator" tool #How To use "MSFSLayoutGenerator" Tool ? : - Just Drag & Drop the "layout.json" file inside it

airifr

Right, thanks the work around! Salty stable uses MSFS sounds whereas Salty dev uses its own sound that's why and that explains why it wouldn't work. Probably the next updated Salty stable will have its own sound, according to dev lol. Thank you FTSim+ for looking into the dev also! 😃

airifr

DONE, will test soon! 😊

airifr

I guess for each dev update we would have to do this.

Chris

It works like a charm now in the dev version. Thanks for the workaround and your effort :)

FTSim+

Slaty Mod added only a single warning sound ( Overspeed )

Chris

hmm...how a little thing can mess something up. Sorry for the circumstances for you

airifr

Yes to better reproduce the real aircraft overspeed sound. Better fidelity but need more work 😅. Thanks a lot!

Gumball 3000

extract & overwrite What exactly to what im overwriting in salty method

FTSim+

1/ Download & extract the"B748Genx_Sp(FS20)(v1.63)" > Move "B748Genx_Sp" inside the Community folder 2/ Download & extract "B748Genx_Sp+salty-dev" > Move the new "B748Genx_Sp" inside the Community folder ( overwrite is asks ) then complete Part 3/ & 4/

Gumball 3000

any tips how to get it to work i follow the steps and still get default sounds

FTSim+

use the configuration below "Notes"

Kevin Jimenez

Just tried it. Yes it's compatible

Tim-Cedrik Schmitz

I tried many times now... And I get no sound.. I have the salty 747 installed and I wanna use the Sound. Can someone please text me an exactly tutorial or doing a video showing exactly step by step how to install it with the salty 747? Thanks

FTSim+

Salty the Dev version ? or the stable

Tim-Cedrik Schmitz

Do you have a full tutorial on how to install with the salty mod? I think everyone who want to use the sound use the salty mod. So maybe you can record one. That would be 100% perfect :)

FTSim+

1/ if the sound are working on the Default Asobo then it sure will work on the Stable version of "Salty" Mod without any more editing . >> Just extract and Move the "B748Genx_Sp" inside the "Community" folder 2/ If you are using the Salty "Dev" Version , look above on "Using For Salty Mod "Dev Release" " - you can also watch this Demo Video https://youtu.be/tOg1Lmx2_sc

Tim-Cedrik Schmitz

Is 1.7 ready with the latest Salty Dev Version released yesterday? (0.4.0)

Xavi Orvi

Something wrong. Minimums callout disappered. It is added by Salty-747 v0.4.0. Also, I don't hear the warning sound when the AP is turned off.

airifr

It works, but since Salty modified their sound.xml after the Sim update 5, there are some sounds that don't work anymore, for example, altitude alert when approaching +-900 to target, and those mentioned above by Xavi, etc..I guess need look at the Salty sound.xml file again?

FTSim+

i did a small look but nothing big changed , will check it more

FTSim+

already updated and Still trying to fix the issues ...

airifr

Salty released a new STABLE version 0.4.0 6 days ago, and a new dev version yesterday.

airifr

😅

airifr

In your new 1.71 B748Genx_Sp sound folder, the siren.wav is not there, but it is still there on the Salty one. ??

FTSim+

i think the "siren.wav" is like the GPWS Caution sound , but it is used on the salty mod as an Overspeed warning

airifr

Yes it is the GPWS warning sound, wrongly used by salty as overspeed warning sound. The overspeed is a clacker not a siren. So that means we will hear the overspeed clacker now?

FTSim+

yes , but if you want to use the Salty "siren" again then let me know so i will make a new configuration

airifr

Thanks, but it's better each sound at correct place. Overspeed clacker 🙂. I wonder why Salty added that sound folder in the first place, before it wasn't there, just to put that wrong overspeed siren sound!?? Before it was using MSFS sounds and it was the overspeed clacker alright. That messes up your simple genx community drag and drop. Perhaps you could talk to them to ask them to revert to previous salty without sound folder, that would make easier for all. Just simple community installs, no more messing about.

Seth

I was trying to use the latest sound v1.71 with the latest Salty dev and i dont have any sound inside cockpit. I used the MSFSlayoutgenerator. I think layout.json is not updating. Update: Ok it was my mistake, instead of Salty files i used default 748

Xavi Orvi

Updated to 1.71, but still no minimums callout and AP off warning sound when used with Salty. Strangely enough, if I do it from an external view, I can hear them. Only in the cockpit, they are not audible. Have you checked that it can be heard inside the cockpit?

Xavi Orvi

The AP off warning is not audible with Default 747, without Salty. It can only be heard in the external view. In the sound file you created (Asobo_B747_8i_Sp.PC.pck), do you have an invalid WwiseEvent with the same name as the AP Off warning and Minimums callout in cockpit?

Asher Gandy

Hi, I couldnt see what was going on in the youtube tutorial as it was heavily cropped. Also, I could not get the layout generator to work in the first place so in the end I just dragged your "sound.xml" to the salty sound folder and got it to work that way by replacing the stock sound.xml file in the salty mod folder. ALSO, for the next update, would it be possible to add a little more rumble for the cockpit view? The passenger showcase view sound is almost flawless compared to the real thing, but the engine drone and rumble that is pronounced in that view isnt very present in both external and cockpit view. None the less, thanks for fixing asobos horrible turbofan sounds!

Xavi Orvi

Sorry, this seems to be a problem with the base sim...

airifr

Typical MSFS, each update they break something that was in a "leave me alone" working state. This has to stop, or Asobo can go find jobs at supermarket and give Microsoft legacy back to Microsoft. One year since launch and MSFS is still messing about with basic petty things that any sim should have as standard ready solid at launch 🙄

FTSim+

will add a new Autopilot warning parameter and test it to see if the issue from the model or the sounds

airifr

The MSFSLayoutGenerator works prefectly fine. No need mess with python install etc, just drag and drop, easy, why complicate more?

FTSim+

sometimes it wont work when the Aircraft folder name it a bit long or its install directory ( Long Path ), it is a casual "bug" , it happen to me also , maybe it will be fixed on newer version

Asher Gandy

(airifr) Because I could not get the latest version of the layout generator to work. Windows firewall would not allow it to run and even after I forced it to run, it would not do anything with the files. If you read my post youll see that drag and drop is exactly what I did with the sound.xml file. The older version of the python script ftsim posted worked flawlessly though. Also regarding my comment about the tips of of the blades on turbofans spinning at supersonic speeds at high rpm, look under the "noise" section here to have a better idea of what i was talking about. https://en.wikipedia.org/wiki/Turbofan

airifr

You see that's where you got it wrong, you DON'T run the MSFSLayoutGenerator.exe file, you leave it alone. You take the layout file and DRAG it OVER the MSFSLayoutGenerator.exe, done! Have you done this? And no need your link I already know about turbofan, as professional pilot. Your post was word confusing to start with...

fred alexanderr

do I just need to place the file in the community folder and that's it? I'm using the default 747

FTSim+

Salty ? , No "Salty" Here 😊

Kevin Jimenez

Hi. Just downloaded the new 1.2 version. There are now a couple of high pitched sounds that are way TOO loud in exterior view. The first one you can hear even when engines are off. The other sound is when you turn on the engines. I had to lower "aircraft miscellaneous" volume slider down to 10 since they were too loud. Maybe an emergency update for this can be made? Other than that all other sounds are great. Thanks!

Xavi Orvi

I don't understand the difference between v1.2 and v1.12 (v1.72). (I don't know anything about X-Plane/FSX) What is the difference?

Xavi Orvi

Is it OK to just use v1.2 without worrying about such things?

FTSim+

yes , just changed to separate the MSFS from the x-Plane versions

FTSim+

hydraulics ! yes it is too loud ( sorry forgot to adjust it ) , fix will be ready shortly ...

Kevin Jimenez

Just tried 1.21. Thanks for the quick fix! Sounds are awesome.

Gumball 3000

my plane came with no sound what did i do wrong

FTSim+

How to Install : 1/ - Rename the "sound" B748 folder ( found inside : Official\...\asobo-aircraft-b7478i\SimObjects\Airplanes\Asobo_B747_8i\ ) 2/ - Open "B748Genx_Sp(FS20)(v1.21)" and Move "B748Genx_Sp" inside the "Community" folder

airifr

The flaps sounds shouldn't be heard from flight deck either, flaps sounds should be heard around wing's trailing edge, this isn't Cessna 152..😎

FTSim+

indeed , but others want it to be a bit loud

airifr

Why not make two versions then, one unrealistic where others can be pleased with all the sounds they wanna hear in the flight deck, and one faithful to real aircraft sounds where me and other others can be pleased also. Regardless, your sounds are still much more realistic than the default ones..

FTSim+

👌 but Rather 2 configurations is better

airifr

Absolutely, I didn't use the right word 😄

David Lee Christie

Well done! Only thing: Engines sound a bit quiet from inside & wingview. Everything in sound settings is set to 100% as written in the readme. Maybe someone has an idea or there is a chance for a louder update some day :)

airifr

Update: looks like there is still need a work around now, since Asobo introduced flaps drag sounds and passenger ambiance on the latest sim update. I was wondering why I wasn't hearing them, then I remembered we disable the Asobo 747 sound folder to have your FTSIM sounds heard. https://prnt.sc/221rsys

Awemeter

The sound pack makes it so I can hear aig aircraft outside sounds from the inside

FTSim+

i think "AIG" is still using the old FSX sounds so it might not be very accurate on FS2020

Awemeter

No, it's def u cause it happens just with your sound packs, and also I can hear my catering truck and bag cart from inside my cockpit like I'm right next to it. (only happens when doors are open)

FTSim+

Currently installing the AIG Addon to check out the issue more

Awemeter

Also having a issue with 777 ge sound pack too

Kevin Jimenez

Salty just released a new update where the Salty 747 is now separate from the Asobo 747. Will this sound pack still work for Salty?

FTSim+

Downloading and making the changes .... 👍

Marcus Key

I have the latest Salty dev version from the FBW installer and with this sound pack installed my game crashes if I turn on the beacon lights, if I turn them on without the pack installed it doesn't crash.

FTSim+

weird 🤨 , will Redownload the Salty mod and look for the issue

Timberolic

Hi folks! Contributing member at Salty Simulations. I use the soundpack on the Salty 747 and absolutely love it. A few things I like and some changes//improvements I'd suggest: +1 on the engine sounds. It truly alleviates the dull and lifeless Asobo sounds. +1 on wind sound effects as you climb. +1 on rain sound effects. If only wipers worked properly so we can get some wiper sounds next! +1 on gear deployment/retraction. Love all the THUMPING and drag sound effects! -1 on the single sound effect when touching down. Regardless of whether it's a smooth or hard touchdown, the main gear touching sounds the same. Would be nice to get an idea of how bad (or good) our landings are. -1 on the Autothrottle Disconnect sound that randomly triggers when descending. I do have a clip of this if an investigation is pursued, but what should be the autothrottle disconnect sound plays when descending and managing speed as well. It seems to be in conjunction with flap deployment if this could help. It plays quite frequently and drives me crazy at times with no fix yet. Overall, a splendid project that I approve of. Keep up the awesome work! EDIT: I pinpointed the issue regarding the AutoThrottle sound triggering so much. It seems to occur when throttles idle, manually or with autothrottle when in a flaps config.

Kevin Jimenez

Hi. Could you check on this as the latest Salty update seems to have made the sound mod incompatible. Engine sounds work but all buttons and knobs in the cockpit have no sound

Timberolic

Does not occur for me, and I fly the aircraft on a consistent basis. Do a clean install of the aircraft and make sure you properly install the sound mod.

Timberolic

Can this be touched on? You have done an update for the PW sound pack (which doesn't even exist on the 747-8) but no news on the GEnx package :(

Kevin Jimenez

Hmm already did several times. Just to be sure, basically i just move the simobjects and build files into the salty folder then run the build file. That’s all it is right?

FTSim+

use the "v1.22b" ( it dose not require the "build.py" tool ) - extract and move "B748Genx_Sp(S)" inside the "community" folder - update the Salty layout file as instructed on the "INFO.pdf" file ( Require only deleting a few lines )

FTSim+

Currently work in Progress (MSFS) : - MSFS A320 CFM - MSFS B748 Genx - MSFS A330 NEO - MSFS C-130

Timberolic

Awesome, this is what I wanted to hear. I would like to emphasize on the autothrottle disconnect sound spamming when idling in flaps config. That is my only gripe as we speak, love everything else

Kevin Jimenez

Still doesn’t work for me sadly. Either using the python method nor the editing the salty file

Ungeneer

Same issue for me. I've installed it as instructed, by moving the B748 folder inside the community folder and deleting the sound.xml line of the layout file but still only a few switches like the engine starter buttons have clicking sounds

Ungeneer

So this actually seems to happen only on the dev version. I tried it with the stable and it does work. Would really preffer to have it working in the dev version though...

Kevin Jimenez

Yes because in one of the latest commits in github i saw that they added cockpit sounds. This probaby changed some of the lines in the layout files. Aligns completely with what we’re experiencing which is missing cockpit buttons and switch sounds

Ungeneer

Would be great if you can make this work with the dev version

FTSim+

indeed , update in Progress for the Dev Version ( Link should be ready in few Hours after this reply )

Ungeneer

Thanks for updating, though most if not all of the overhead push buttons (fuel pumps, generators, etc.) still have no sound. Also, this is just my opinion, but I think you should leave the default sounds for all the switches. The dev version now has some excellent sounds for those.

FTSim+

Too many new Parameters are added on the salty , very soon uploading "Only Engines" Mod until the work is complete .

Ungeneer

That would be great. Thanks for all your work!

Timberolic

Have the new soundpack, the wailer is still unfortunately present when throttle idles in flap config :/

FTSim+

Disabled on the v1.23a , Pls Re-download

FTSim+

Fixed Missing Button sounds on the v1.23a and added "Only Engines" Mod

Ungeneer

Your engine sounds with the salty button clicks are just perfection. Thanks once again!

Timberolic

Can unfortunately verify the wailer is still enabled on 1.23a, any chance users can just remove it entirely or void it from the .xml somehow?

FTSim+

- Open the "sound.xml" file with notePad - Look for : "wailer" - Delete it's full line 👇 ""

Timberolic

I come back with the unfortunate news that removing that line containing "wailer" in the .xml did not stop the sound. Just to confirm, this sound I mention is what is heard when the autothrottle is disengaged (though this occurs when the aircraft is in a flaps configuration and the throttles idle)

FTSim+

Not sure what is causing this , is it like the Autopilot Warning or something else ? - try to delete the "caution_aural" full line and reload the aircraft ( you can enable the Developer Mod of MSFS to Reload the aircraft )

Timberolic

https://youtu.be/sv64Aa98QMY The sound plays whenever the throttles are idled in a flaps configuration (>1 detent) with the exception of all gear deployed and showing green. This is an older video but the issue still remains

Porcelain Kilt

v1.23 For Salty (0.5.1) - Mega says file is no longer available to download