Home Creators Posts Import Register Favorites Logout

Content

🔅----[ INFO ]----🔅

CRJ Sound Addon For MSFS

Video Demo 

🔅----[ What's inside ]----🔅

GE CF34 Engine sounds

Cockpit Avionics sounds , Power Bus , Fans

Weather effects : Wind , Rain 

L-Gear sounds : Roll , Door , Wind Drag

🔅----[ Change Log]----🔅

v1.17 (16/July/2025)

Updated Configuration for the latest Aerosoft CRJ version

Improved interior engine sounds (Reduced "Hiss" noises , Fixed “Pops/Clicks” Artifacts , Tweaked 3D view )

Added Configuration For VirtualCol CRJ200 Package

v1.16 (20/Apr/2025)

v1.15 (07/Dec/2022)

....

🔅----[ Notes ]----🔅

🔅----[ Available Links ]----🔅

v1.17

For "Aerosoft-CRJ v2.1" (Store version) : Download Link

For "Aerosoft-CRJ v2.1" (Marketplace) : Download Link

For "VirtualCol-CRJ200" (Store version) : Download Link

For "VirtualCol-CRJ200" (Marketplace) : Download Link

Older Releases :

v1.16

For "Aerosoft-CRJ v2" (Store version) : Download Link 

For "Aerosoft-CRJ v2" (Marketplace) : Download Link

v1.15

For "Aerosoft-CRJ v1" (Store version) : Download Link 

v1.15b

For "Aerosoft-CRJ v1" (Marketplace) : Download Link 

👉 Install tutorial : Video

Files

Comments

Gate Checked (edited)

Comment edits

2026-09-23 05:00 Do we still need to move the CRJ to the main community folder? I see it says Easy to Install but the recommended video link (and your documentation) points to a manual install. Right now my CRJ is in this folder G:\Aerosoft One Library\Add-ons\msfs-7378-AS15236\gameDirectory~Community
2023-01-20 16:56

FTSim+

Nope , Please follow the instruction on the "INFO.pdf" file

nick angel

After doing a fresh install and following the new install procedure, I no longer have switch sounds or GPWS callouts

FTSim+

You did install the v1.15b ? and you're using a MarketPlace or Orbx version of the CRJ ? 👉After installation you must have those 3 files ( "Aerosoft_CRJ.PC.PCK" , "CRJ_Sp.PC.PCK" & "sound.xml" ) inside : "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_550" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_700" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_900" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_1000"

nick angel

I just re installed the crj and the pack, yes I did move those files inside the folder. With 1.15b I do not need to move the aircraft folder to the community folder right? I still do not have switch sounds. I also have no master caution fire sounds

Dash8Demon

Nevermind, let me watch the tutorial again

Dash8Demon

I see the problem - I have no crj folder in my community folder

FTSim+

sorry about this big delay ( no notification is received )

FTSim+

With 1.15b I do not need to move the aircraft folder to the community folder right? - Yes you don't have to move anything , even when using the v1.15 I still do not have switch sounds. I also have no master caution fire sounds - no switch or warning sounds ? 👇 a) the file "Aerosoft_CRJ.PC.PCK" is Missing inside : "\\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_550" "\\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_700" "\\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_900" "\\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_1000" b) something else like Low volumes ?

Davis Ebbert

Anyone else feel like they are following the steps but its not working? On the market place version, trying to get the CRJ 900 the FT sim Sounds. APU sounds, Switch sounds, etc not working :/. @FTSIM is there a way you can either make an easy install program for marketplace purchasers of the CRJ, or more linear directions for this aircraft? TIA.

Davis Ebbert

I can't get the switches, buttons, or APU to make noise using 15b for Marketplace download... I have looked at what you suggested others to do as well, and yet I still can't figure it out. Would it be possible for you to redo a more comprehensive, easier to follow guide to install sounds in the CRJ if we purchased on Marketplace? I find the instructions on this plane confusing... possibly missing steps too? For example, the guide says to delete stuff in the jason file for the crj 550, but if you have the CRJ 700/900 expansion... there's a .jason file in there too with the same items that could/need to be deleted... Your other packs I haven't had trouble with, but I've now spent hours w/ uninstalls of the plane over and over after trying different variations. Why wouldn't my switch sounds, APU, and possibly GPWS not be making sounds at this point?

Jason Paden

I have a marketplace download and I'm a little confused about the instructions. My CRJ is not installed in a community folder. It is installed through Steamapps/Common/MSFS/Official/Steam/aerosoft-crj From my understanding, I copy the original sound file into the modded sound file folders, all 4 of them so I end up having 3 files in there. Where I start to get confused is to where I actually put the CRJ_SP folder. Do I put it in the same subfolder as where the airplane is installed? Official/Steam/CRJ_SP or Official/Steam/aerosoft-crj/CRJ_SP Or do I install it to where all of my other 3rd party community files are? Common/MSFS/Community I think what is throwing most people off is the HLM_Packages as I do not have this sub folder

A320Pilot

possible update for the CRJ V2 2024?

Eric Hill

CRJ v2 is definitely in need of this. I forgot how bad the sounds were

Ungeneer

Hey, the latest update works for the CRJ in 2024 if you install the marketplace version (regardless of whether you bought it in the marketplace or not)

A Fowler

Anyone else having issues with this sound pack? I followed the directions as they are stated, I go into the sim and run the CRJ and the plane will power on, sounds are great and then the issue arises as I start the engines. I start as I normally do through the procedures and the fuel wont kick in. I check everything and it is as it should be. Diagnosis Steps: 1) End flight and start again to refresh - same result 2) Fully close simulator and start again - same result 3) Uninstall, restart sim - (with original sounds) same result 4) Uninstall the CRJ and re-install it. Start sim, load into the CRJ without modifications - works as it should. 5) Re-install sound pack as directed (tried both versions) - same result (No Fuel) What am I missing? (Aerosoft One download - install to community folder)

FTSim+

if the problem still happen without the S-Pack that means is a issue with the aircraft Package , maybe the bug caused by a new MSFS update 🤷‍♂️? i'm not sure .

Seth

After CRJ sound Mod installation, aircraft is not visible on MSFS. Do i have to place sound files in both aircraft editions ( 550 & 700) ? -Update: Placed sound files in both editions and still its not working. Thanks

FTSim+

Aircraft not showing = something wrong on the "layout.json" file or it is missing - did you use the "MSFSLayoutGenerator.exe" ? if the issue still exist ! 1/ restore the Default "layout.json" from your backup copy 2/ open the "layout.json" with a ".txt" editor and Paste this entry below "content": [ { "path": "SimObjects/Airplanes/Aerosoft_CRJ_550/sound/CRJ_SP.PC.pck", "size": 113187139, "date": 132684342887981342 },

Seth

Yes i used MSFSLayoutGenerator.exe as requested, drag & drop layout.json etc. will check again and let you know. didnt make a backup of default layout.json, will restore it from Market store.

Seth

Tried with above entry on default layout.json , still is not working. No CRJ aircraft on MSFS. I use mostly 700 so i rename your entry from 550 to 700.

FTSim+

{ "path": "SimObjects/Airplanes/Aerosoft_CRJ_700/sound/CRJ_SP.PC.pck", "size": 154871626, "date": 132689554064949649 },

FTSim+

still not sure why "MSFSLayoutGenerator.exe" not working for you ! - just try it then open the "layout" file and look for : CRJ_SP.PC.pck

Bryce

Not working for me either, same issue.

Seth

"MSFSLayoutGenerator.exe" is working as the file size of layout.json changed. Also CRJ_SP.PC.pck is placed for both editions ( 550/700) on layout file. Should we delete the Default Aerosoft sounds? Or something is not correct on installation guide. Is it possible to have a simpler installation , like you made for B748_Genx ( drag and drop to community folder)

Thibault

It worked for me just fine.

Bryce

Do you have an older version of the CRJ?

Thibault

1.0.5 latest

Bryce

And you followed instructions exactly and no issue? My aircraft disappeared. Only when I revert back to the default sound does it show up.

Bryce

Still not working for me either. I completely uninstalled and removed all traces of the CRJ as well. Full reinstall and tried again. No dice.

Seth

Mine also , Just disappeared. I followed exactly instructions. Re-installed CRJ...still the same.

Seth

Did you keep Aerosoft default sounds? its not exactly clear if we have to keep or delete them when we place Ftsim new sounds. Looks like updated layout.json file is confused and dont know which sound needs to load

Bryce

It seems you keep both, but I also tried with just the FTSim sounds, and the aircraft still disappears.

Seth

You bought CRJ from MSFS Market Store or Aerosoft ?

Bryce

MSFS Marketplace

Seth

Same here, so maybe there is an issue with CRJ location etc. Just tried again with all alternative install methods, no CRJ on MSFS

Bryce

Hopefully we will get a response from the creator soon...very frustrating

Thibault

Maybe the issue is with MSFS Store. Files are encrypted? I bought directly with Aerosoft, no problem.

Seth

so that explains maybe the issue. Is your CRJ installed on Official or Community folder?

Seth

This is updated layout.json file. Is it normal to have Aerosoft default sound + Ftsim sound entries? { "path": "SimObjects/Airplanes/Aerosoft_CRJ_550/sound/Aerosoft_CRJ.PC.PCK", "size": 59296300, "date": 132674513919150775 }, { "path": "SimObjects/Airplanes/Aerosoft_CRJ_550/sound/CRJ_SP.PC.pck", "size": 154871626, "date": 132689554064949649 }, { "path": "SimObjects/Airplanes/Aerosoft_CRJ_550/sound/desktop.ini", "size": 46, "date": 132674513872413887 }, { "path": "SimObjects/Airplanes/Aerosoft_CRJ_550/sound/sound.xml", "size": 41553, "date": 132689556180756820

Bryce

Figured it out. The MSFS marketplace files have something wrong or missing. I purchased from Aerosoft, and there was an extra file in the sound folders. Installed per instructions above and voila. Never buying another aircraft addon within MSFS...

Seth

So you bought 2 times CRJ? this is ultra weird issue as Aerosoft sent the same files to Market place.

Seth

We found which is the main issue: CRJ edition from MSFS Market Place don't have sound.xml as possibly uses a number of encrypted files we are not able to get into. Is there any other option to have FTSim sounds? thanks

FTSim+

Sorry for delay , Can mention the names of the ".fsarchive" files ? ( found inside : \aerosoft-crj\SimObjects ) menwhile try this : - Make a bakup of the Aircraft folder ( make a copy or add to zip file ) - remove the ".fsarchive" file that have the smallest size - extract and paste those files https://drive.google.com/file/d/1ncoDD9GLH5QqvMJNjdNPrBdiyHTzUeYs/view?usp=sharing - update the layout file again with the ".exe" tool >> if the aircraft not showing try to remove the next smallest ".fsarchive" file & update again !! Still nothing then will buy again the Package from the marketplace

Seth

Thanks for your support. Here is a quote regarding this issue from Aerosoft/CRJ forum: "Ok let me help. When you buy ANYTHING from the market place, they add a DRM layer on top of the standard files. This is downloaded to your computer in an encrypted format. When you call the add on into the sim (like choosing to fly the CRJ) the files are decrypted by the sim and things run. When you buy direct from the publisher/developer, you will get the files in the manner in which they intend you to get them. In the case of AS, you get the unencrypted files. If someone makes a mod (authorized or not) and you install it, you are doing so at your own risk and responsibility to trouble shoot. This can include liveries too as many that can be found will cause problems with add on planes. This sound mod being spoke of, was it shown to work with the update that Asobo just pushed out? That is one thought. For anything deeper you must go to the source, either Asobo for market place purchases or whoever made the sound files. "

FTSim+

i notice that on the Carenado , though this "Encryption" stuff is added only for the Asobo Legacy aircrafts . But if you tried the files above and still not working then will have to rework the sounds it to be like the B787 version ( Stand Alone )

Chirag Abichandani

Hi, I put in the sounds and used the layout generator. I deleted the Aerosoft sounds and put in yours in the aircraft folder along with the xml. Even though the plane shows up in sim when loading it up there are no sounds in sim. I have cross checked that the entries for CRJ_SP_PC.pck are in layout.json, and they are. Any solutions? Update: Restarted my computer and sounds are working, but inly engines/gyros. No switch/knob/warning sounds. Is this right? If these are not included in the sound pack, are we supposed to keep in the original AEROSOFT_CRJ.PC.pck in the sound folders?

FTSim+

this sound mod require the default Aerosoft sounds to work , just restore the "Aerosoft_CRJ.PC.PCK" file then it will be fixed

Seth

i think the Stand Alone edition ( in Community folder ) like B787 and B748 is the best option. Many users have the Market Place CRJ edition so they will face the same issue.

FTSim+

working on it .... sorry though cause i didn't know about this before , but did you tried the files above ? just waiting for you before i bought the crj again 😣

Seth

Got the files, Will make it asap!

Seth

Ok i tried the files,removed smallest ".fsarchive" as requested ....still no CRJ on MSFS. I also removed the next smallest Fsarchive and then updated again Layout.json file....same issue.

FTSim+

restore the first "xxx.fsarchive" file that was deleted before removing the next one ( always keep 2 ".fsarchive" files on the SimObjects folder )

Seth

Ok, will check right away

Seth

Yes! its working 100%, CRJ is back on MSFS + i checked really fast the sounds and everything works perfectly with out any issue. Will make a test flight tomorrow. The difference from default Sound is huge...great work

Seth

As for fsarchive file , i kept the smallest ( 85kb) + bigger ( 227,319kb). I had to remove the middle one. that worked 100%

FTSim+

🥳 , please can you mention the name of the file so other can use this option for the moment until the sounds are reworked

Seth

vuztsyez.fsarchive (2.875kb) . This is the file which need to be removed

FTSim+

Hero of the day 👍 , will add this new instruction to help other members

FTSim+

A New install format will be added soon and it will work fine with both "marketplace" and "Aerosoft Store" versions .

FTSim+

Didn't add any Hydraulic sounds yet for the CRJ , soon will do

Dennis Mullert

It appears that the CRJ sounds downloads are corrupted. Can you guys look into this? No issues with the other downloads.

FTSim+

- Maybe wrong Password ? or "Space" added ? : "MFSiM-Sounds" ( Copy & Paste without quotes ) - Try Using a diffirent Archiver Program like "Bandizip" or "7zip"

Liam Montgomery

I absolutely LOVE these new sounds! The aircraft feels so much more real. Would it be possible to increase the ground roll sounds a bit? Every CRJ I've ever ridden in sounds like a box of loose bolts lol. That's my only real suggestion!

FTSim+

of course 😊 , will add other Cabin ground Roll samples

Mark Proust

So I downloaded the file and followed the instructions but not sure if I did something wrong so maybe you can help: 1) when the aircraft is running, the air makes almost a constant rattle-like sound. As if some paper or steamer is attached to the fan blowing in the wind… is that normal/intended? 2) I have no flap sounds… the just extend/retract silently. Let me know what you think when you get a chance. Thanks!

FTSim+

1/ Can record a short Demo video showing the issue ? 2/ No Flaps deploy sound are added yet but the original are not disabled !

Chirag Abichandani

Hi could you please work on removing the engine sounds as the wind sounds pick up after 10,000 or acceleration? They are still audible in cruise. This is present in most of your XP11 soundpacks

FTSim+

The same effect it is also enabled here on the CRJ , you can hear the difference better when Passing "Mach 0.7" or 400 Knots in True Airspeed/Ground Speed

FTSim+

Do it need to be tweaked More ?

Chirag Abichandani

In my opinion, yes such that the volume of the engines "decreases" or drowns out after crossing 250 KIAS. I recorded a video here: https://youtu.be/JOqNz3nZ1yE. You can see my TAS is above 400 yet we can still hear the "buzz" of the engines in the background. When I increase/decrease the throttle so does the buzz which is audible. It would be great if you could work on this! Reall enjoying your soundpack until now

Philippe

Hi everyone. I´m new here

Philippe

Yous say "drag and drop the layout.json into the MSFSLayoutGenerator.exe. How to do that ? If i run the MSFSLayoutGenerator.exe, i can´t drop the layout.json in it? I´m a bit lost at the point. Thanks in advance for the support.

Philippe

I think you should do one more understadable......For beginner user the video goes to quick. Also i´ve tried to join your discord. How we do that .I´m connected through patreon and what should i do more ? Thanks.

FTSim+

it is the Gyro noise 🧭 , Was Noted on the "INFO.txt" file for how to disable it if you want 👇 ==================== 4. NOTES ==================== 1/ To Disable the "Gyro" noises : - Open the "sound.xml" with ".txt" editor - Delete this Parameter ( Lines n°212 ... 214 ) Sound WwiseData="true" WwiseEvent="CGyro" Continuous="false" NodeName="ASCRJ_PFDC_BRT" ........... > Range LowerBound="24" /> /Sound>

Robert C.

Yup that fixed it. Thanks!

Lauri Salonen

Are you planning to do switch sounds for the CRJ? The aerosoft ones are terrible :D Otherwise very good soundpack!

FTSim+

why not ! , maybe it will be made next update 👍

David Horgen

I have no sound whatsoever and I followed the video exactly. password was copy pasted directly from this page with no quotes

FTSim+

No sound in Both CRJ 500 and 700 ? 1️⃣ After install you must find those 3 files - sound.xml - Aerosoft_CRJ.PC.PCK -CRJ_SP.PC.pck inside : "CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_550\sound" and inside : "CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_700\sound" 2️⃣ Did you rename both "sound" folders that are found inside : ...\\Aerosoft-crj\SimObjects\Airplanes\Aerosoft_CRJ_550 ...\\Aerosoft-crj\SimObjects\Airplanes\Aerosoft_CRJ_700 Exp : the "sound" folder is renamed to "sound.1" 3️⃣ is the Aerosoft_crj "layout.json" file is updated correctly using "build.py" or "MSFSLayoutGenerator" 💡 to check if the layout file is updated or not ! a) open the "layout.json" file with a ".txt" editor b) look for the new name of the "sound" folder ( Exp : "sound.1" ) If it is found then the "layout.json" file is updated ✅

Anthony A

Really incredible package, makes the CRJ so much more enjoyable and realistic.. Only problem is there is no sound when the mains touchdown, just silent. Any plans on adding in a touchdown sound?

MediocreGorilla

Loving this one, adds an incredible amount of value to the aircraft! One thing I've noticed: When in wingview, the startup sounds are fixed to their respective side, meaning: Looking at the left wing from the cabin while starting engine no 2 results in the startup sound playing from the right speaker, so the sound comes from the front of the cabin. Same for no 1 on the left speaker. Is that something you can refine? :)

FTSim+

will reduce the Settings value of "3D Panning" effect , i thinks it is the main issue 👉 "3D Panning" effect is a Parameter that help mix the "Left" and the "Right" sound channels , ("High Settings" Example : when you look left you will hear the "Left" sounds louder and the "Right" sounds will be muted )

MediocreGorilla

Thanks a lot! I appreciate your dedication!

JWL246

Really love the immersion factor with this new sound pack. Makes the CRJ so much more realistic!

SockelMania

900/1000 expansion just released. @FTSim+ can you please check the compatibility from your side?

Liam Montgomery

I did some testing tonight and the current sound pack is definitely not compatible :(

Chirag Abichandani

Hey, the soundpack works well for me with the latest update (not with the -900/-1000 since there aren't any sound files in FTsim's soundpack for those yet). Have you followed all the instructions carefully?

Mark Proust

Makes sense. Even though 550/700/900/1000 all use engines from the same family (GE CF34), the 900 and 1000 use different variants which provide more thrust and, probably, slightly different sounds... the 900 uses CF34-8C5 and the 1000 uses CF34-8C5A1, which is different from the 550/700 which use CF34-8C5B1. Looking forward to the sound pack whenever it's released! :)

FTSim+

📣 it sounds very similar but with a bit higher Spool noises . >> The New 900/1000 Configurations will be ready Soon

Liam Montgomery

Thank you so much!! These new sounds are phenomenal!!

SockelMania

As always great work from you, thank you very much!

Mark Proust

Thanks! Just a quick question about removal of the Gyro noises... I don't see the old parameter in this xml file, but I do see this new parameter: at lines 178-180 (tried to include it, but it won't let me) Should I remove this to remove the Gyro noises? Or, have the gyro noises been updated/reduced and this string should be kept? I'll keep it for now till you can confirm. Thx again :)

Enzo Lucignano

Thanks for the update. Quick question: if i have the 1.1 version do i have to follow the whole installation process again ?

DJSean00

I did and I have no sounds now?

MediocreGorilla

Hi there! Have there been any changes regarding this in v1.11? Not that I demand anything, just making sure this shouldn't have changed, cause it still sounds the same. Cheers!

FTSim+

The Gyro noises was reduced a bit , but You can disable it completely by removing this Parameter ( Lines n°178 ... 180 ) 👇 Sound WwiseData="true" WwiseEvent="CGyro" ..... Range LowerBound="20" /> Sound>

FTSim+

1/ - Do the Default Aerosoft "sound" folders are Renamed ? 👉 "sound" folders are found inside : ”aerosoft-crj\SimObjects\Airplanes\Aerosoft_CRJ_550” ”aerosoft-crj\SimObjects\Airplanes\Aerosoft_CRJ_700” ”aerosoft-crj\SimObjects\Airplanes\Aerosoft_CRJ_900” ”aerosoft-crj\SimObjects\Airplanes\Aerosoft_CRJ_1000” 2/ Is the Aerosoft "layout.json" file is updated* after renaming the "sound" folders ? (*) updated using "MSFSLayoutGenerator" tool or the "build.py" script 3/ Do the sounds also are not working on the "550" Model ?

FTSim+

@ Enzo Lucignano , if the older version of the sounds was working than no need , you have to follow only the "How To Install" steps n° 1/ and 2/

FTSim+

All Was Noted on "# What's New ? :"

FTSim+

Any Request for changes please ask 🙂

MediocreGorilla

No worried, just wondered if you already tried reducing 3D panning for the engine start sounds as you mentioned further up. Right now they're still fixed to their respective speaker. Just a minor thing though, love the new version. Very immersive!

Mariusz Kalinowski

I think the gyro is still to loud and what about callouts? They are too quite. ;)

Tim-Cedrik Schmitz

There is no Sound.xml in 700/900/1000. Folders are just empty

FTSim+

Hi , did you follow the instruction inside "INFO.pdf" ?

FTSim+

instruction is added above 👉 # Notes :

Mariusz Kalinowski

Yes, I saw that, but if I don't want to delete it completly? What about callouts volume?

FTSim+

callouts are not touched , those are the Default sounds of Aerosoft , check the PAD

Mariusz Kalinowski

Strange... In default I'm sure they are louder. I will check that again. ;)

Mark Proust

All good. I'm keeping it this time around. Since I can't hear it over the fans anymore, I don't mind it. Thanks though!

Chris D

Hey Guys, great work on the CRJ900/1000 - couple of suggestions: - Be cool if there was a "recirc fan" sound, and internal sounds from hyd pumps. - Also, the initial spool on ground from idle -taxi thrust seems too loud/sounds like takeoff buzzsaw - this should be more of a low freq drone I think? Great job though :)

FTSim+

Gyroscope : it is Digital Aircraft instrument but on the older CRJ Models it is Mechanical and it Makes a "Ticking" noises when it is "ON"

Dash8Demon

The gyro lines that need to be deleted are not clear at all. What exactly do we delete? The "....." could mean several things. What do we do about the spaces left over?

Bryce

Agreed. The hydraulic sounds are what is most missing, heard from mid-cabin. I also agree that the spool sound is off. It seems to be too "quick" to spool up to the buzzsaw.

FTSim+

New update almost ready and The Gyro sounds will be removed

Dash8Demon

Great news thanks! Soundpack is great aside from that

FTSim+

New Engines Tweaks are made , the hydraulic sounds will be added 👍

Mariusz Kalinowski

Will You do some upgrade in future? I see some issues here ;) Flaps in my opinion are too loud, in real it is very quiet. Spoilers lever is heard in wingview, it shouldn't. Spool sounds should be louder, gyro is too loud. I saw You did some new version for Xplane with new sounds for it. Will You do it here too? :) Thx

FTSim+

The cockpit Levers/switches sounds are the Default ones from Aerosoft ( currently trying to include new ones on the sound Mod ) On the latest update (v1.12) - Flaps sounds are reduced - Spool sounds ( Not Buzz-saw) are a bit louder on takeoff

MediocreGorilla

Engine tweaks are amazing! One question: Have you tried lowering the "3D Panning" effect value for the startup sounds yet? You once said this could solve the sounds only playing on the respective L/R speaker. If you tried already, it didn't seem to help unfortunately.

FTSim+

Yes the values was reduced for all Sounds , is your problem only on the Startup ?

MediocreGorilla

Yep, only the startup sounds. Rest is completely fine.

Owee-Wan Kenobi

I am not entirely sure what I did wrong, I have followed 100% but my aircraft no longer show up!

FTSim+

MarketPlace version ? - Try only to rename the Aerosoft sound folders and copy the ".PCK" file ( no need to update the "layout" file ) Aerosoft shop version ? - Try updating again the "layout" file using a different method ( shown on the "INFO.pdf" )

Robert C.

With the new update I seem to no longer be getting Flap Sounds. I'm not really sure why. We're they turned down to barely audible, or is it an issue with the sound pack?

FTSim+

interior Flaps Noises are reduced on the latest update ( Was too loud ) , Now it only can be heard clearly on the Wing View

Robert C.

Ok then that makes sense now. Thanks!

John Doherty

is there an updated install instruction on how to install the sound if you have the market place version. I did all of the steps and no sound

FTSim+

Maybe the Layout file is not updated correctly ? 1/ Make sure that "Aerosoft_CRJ.PC.PCK" & "CRJ_SP.PC.pck" & "sound.xml" are inside : \\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_550\sound\ \\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_700\sound\ \\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_900\sound\ \\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_1000\sound\ 2/ Download and Follow this tutorial below : https://www.patreon.com/file?h=52857385&i=9726631

Thibaud

doing what is asked to do in your instruction file and therfore the plane doesn't show in the sim

Kristopher Richardson

The aircraft dissapears once installed (done as per instructions) and have to reinstall in the content manager, This pack wont work succesfully for me.

Edward Smolinski

is there an easy way to install these sound files? It seems a bit complicated for someone who isn't familiar with code..

FTSim+

The install tutorial ( with Screenshots ) is inside "INFO.pdf" . instruction divided into 3 steps , - The first 2 are just coping files - The last Step is for updating a configuration file "Layout.json" , it can be done by using any of the 2 tools provided "build.py" or "MSFSLayoutGenerator.exe"

Micha Pommes

Its not working? Im pretty sure i installed it correctly. NEVERMIND works now! Sounds amazing! Good job!

Edward Smolinski

I followed the steps and got to download that python program however where do I find that build.py on my computer? Also where I do find it what specific folder in the CRJ do I copy it?

FTSim+

Good 👍, why are you keeping the first message then 😖 . The main problems always are : 1/- "Layout.json" Not updated successfully by using any of the 2 tools provided ( it can be also updated Manually ) 2/- MSFS not restarted (if Running ) after updating the "Layout.json" file 3/ Missing "sound" folders inside CRJ700 / 900 & 1000

Owee-Wan Kenobi

Forgot to respond, but that fixed it, thanks!

Glockman40

I'm only getting mod sounds for the 550. I've been through the steps several times with no luck.

FTSim+

Did you copy the "sound" folder from "CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_550" and Paste it inside : CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_700 & CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_900 & CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_1000 💡 Step n°2/C

Glockman40

I figured it out I missed understood a step. Awesome sound by the way.

Mateo Skinner

After I installed the sound pack I have been unable to hear any of the sounds that the switches make

FTSim+

Did you Make a copy of the "Aerosoft_CRJ.PC.PCK" file from : "aerosoft-crj\SimObjects\Airplanes\Aerosoft_CRJ_550\sound\" then Paste it inside : "CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_550\sound\"

FTSim+

See "HOW TO INSTALL" : section "2/"

FTSim+

Sure 👌 , BTW that is a Loud Takeoff on the Video

Todd

Did you ever get this resolved? I am having this issue.

Chase Sawyer (edited)

Comment edits

2026-09-23 05:00 Hey I have no sound when I loaded in.
2022-02-12 01:58

FTSim+

1/ After installation you must have those 3 files ( "Aerosoft_CRJ.PC.PCK" , "CRJ_Sp.PC.PCK" & "sound.xml" ) inside : "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_550" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_700" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_900" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_1000" 2/ Still no Sounds ? then it Must be the "Layout" file found inside "aerosoft-crj" is not updated successfully a) Try updating again with a different Tool , "MSFSLayoutGenerator.exe" or "build.py" b) Try updating the "Layout" file Manually using the Tutorial added Below "# Notes"

FTSim+

🛑 Do not rename anything inside "CRJ_SP" , Copy only the files mentioned ! 👉You need to Rename only the "sound" folders found inside : - aerosoft-crj\SimObjects\Airplanes\Aerosoft_CRJ_550” - aerosoft-crj\SimObjects\Airplanes\Aerosoft_CRJ_700” - aerosoft-crj\SimObjects\Airplanes\Aerosoft_CRJ_900” - aerosoft-crj\SimObjects\Airplanes\Aerosoft_CRJ_1000”

FTSim+

💡Another version will be uploaded shortly , More simple to install and it do not require any modification ( Beta version !! )

Rayne Forsyth

With the beta, is it like the Twotter, where you have to move it to the "Official" packages section? Or does the actual plane stay in community?

FTSim+

Yes Yes , forgot to mention that on the instruction .

FTSim+

💡 it is always better thought to move most aircraft package inside the "Official" and keep only the Mods inside the "Community" ( My Preference )

Andra

Hi, any chance to increase the callouts volume?

FTSim+

The Callouts are the Default ones of Aerosoft , they Can not be edited 😕 . The only way is to Disable them and adding new ones and i think they will not be seemeless to the Default TCAS GPWS sounds 👉 Try to Reduce the Volumes of the other sounds ( Engines , Avionics , Wind )

Mark Proust

Is there going to be a "non-Aerosoft Store" version? Using this version, I've tried both the new install method as well as the old install method. In both installs, I'm getting some sounds, but not getting sounds for switches, APU, etc. Followed the same process as in previous versions.

Thomas Roth

I am having the same issue, also non-Aerosoft store version.

FTSim+

install instruction Step n° 2/ is for the Marketplace version 👉 Make sure the “Aerosoft_CRJ.PC.PCK” is inside the sound Pack folders : ”CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_550\sound” ”CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_700\sound” ”CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_900\sound” ”CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_1000\sound”

FTSim+

“Aerosoft_CRJ.PC.PCK” is found inside : "aerosoft-crj\SimObjects\Airplanes\Aerosoft_CRJ_550"

Thomas Roth

I have done that, but I still experience the same issue. No problems with any other sound pack though.

Marcus Key

I'm using the Aerosoft store version and I also can no longer hear buttons or switches after installing the 1.13 pack, after going back to version 1.12 I can hear them again.

Alex

same for me

FTSim+

ignore the last message , Aerosoft Store version : 1/ make sure the default Aerosoft sounds are working fine ( no Sound Mod ) 2/ make sure the "Aerosoft-CRJ" aircraft folder is inside the "official" directory ...\\HLM_Packages\Official\Steam\ or ...\\HLM_Packages\Official\One Store\

FTSim+

Aerosoft Store version : 1/ make sure the default Aerosoft sounds are working fine ( no Sound Mod ) 2/ make sure the "Aerosoft-CRJ" aircraft folder is inside the "official" directory ...\\HLM_Packages\Official\Steam\ or ...\\HLM_Packages\Official\One Store\

Alex

Sadly it doesn't work for me. If i move the aerosoft-crj folder into the offical directory, the crj is not avaible in game. I also switched back to the 1.12 version.

Joao

I also have the problem of not being able to hear switches.

FTSim+

did you move it inside : "\\official\steam" ? (for Steam users ) or "\\official\One Store" ? (for Microsoft Store version )

buffchip

My official install directory is D:\Aerosoft One Library\Add-ons\msfsSteam-f956-AS15238\gameDirectory~Community\aerosoft-crj . Is this not the same as "\\official\steam" ?

Glockman40

Same here no sound on switches

FTSim+

not sure but i think that is the "Community" folder , Usually you will find all Asobo Aircrafts and Airports inside the "\\official\steam" 👉try to install the "v1.13b" release if you still have a Problem

FTSim+

- Did you installed the "v1.13" or the "v1.13b" ? - is the "aerosoft-crj" is inside the "Community" or the "\\official\xxxx\" folder ?

Glockman40

v1.13 I have the Aerosoft version. Yes it's in my community folder.

FTSim+

Did you install the v1.12 before ? Yes !! >> install the v1.13b , just extract and overwrite the file No !! >> make sure the "aerosoft-crj" aircraft folder is inside : "\\Official\Steam\" or "\\Official\One Store\"

Brandon M

No switches sounds for me with the msfs marketplace version. the Sound pack files instructions were followed with my crj being in the official folder. Not sure what's going on.

FTSim+

1/ Make sure the Default Aerosoft sounds are working fine ( without the sound Mod ) 2/ install the "FS_CRJ_Sp(v1.13)" => Move "CRJ_SP" inside the Community folder and do not Remove or Rename anything

Marcus Key

So if I put the "aerosoft-crj" aircraft folder is inside the \\Official\Steam\ folder the CRJ no longer shows up in my sims aircraft selection.

Giacomo Lawrance

Getting rain noises despite there not being any rain around

mac

Hello! - just downloaded v1.13b and a little confused by the install .pdf - note I have the "marketplace" version - from the install instructions I have 3 steps "-" with the community folder file then "2/" and "3"/ - for the market place version do I need to follow all 3 steps? also is the aircraft folder located in the "official" folder which is next to my "community" folder? (note i have the steam version of MSFS)

mac

Update: just noticed there are a few more steps "-" "2/A + B" "3/A + B + C" - do I need to follow them all to get this working with the market place version ? and how do I get the msfslayout generator to work do I just copy the "aerosoft-crj" folder into the .exe folder and then what exactly happens?

mac

update2: confused! do I just need to follow steps 2)for the marketplace version? if yes is partA) the community folder and B)the actual install folder in the "official" folder or the other way around - note my official folder already has the "aerosoft_crj_cp_pck" in it?

FTSim+

Did try many weather configuration but no bug found , will check it out more ....

FTSim+

Use the "(v1.13b)" For the Marketplace version and follow all the steps in the "INFO.pdf" file After installation you must have 3 files ( "Aerosoft_CRJ.PC.PCK" , "CRJ_Sp.PC.PCK" & "sound.xml" ) inside : "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_550" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_700" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_900" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_1000" Still no Sounds ? then it Must be the "Layout" file found inside "aerosoft-crj" is not updated sucssefully a) Try updating again with a diffirent Tool , "MSFSLayoutGenerator.exe" or "build.py" b) Try updating the "Layout" file Manually using the Tutorial added Below "# Notes"

FTSim+

Sorry for a very late reply 😴 ( Too many Mods are in Progress )

Potta

Experiencing the same as others in this thread, I have the Marketplace version and get no sounds from the switches anymore. It worked before, and I have followed each step in the INFO document. What to do?

Potta

Would like to add that it is all the original sounds, so no warnings, callouts, APU or other sounds. I have tried both update variants using MSFSLayoutGenerator.exe and build.py with Python but the issue remains.

Parker Robinson

Great addition to the CRJ, would love some new switch sounds though.

FTSim+

Did you make a copy of the "Aerosoft_CRJ.PC.PCK" and Paste it inside : ”\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_550\sound” and ”\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_700\sound” and ”\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_900\sound” and ”\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_1000\sound” ? 👉After installation you must have 3 files ( "Aerosoft_CRJ.PC.PCK" , "CRJ_Sp.PC.PCK" & "sound.xml" ) inside : "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_550" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_700" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_900" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_1000"

FTSim+

Sorry it is a bit confusing but this still the only way to make the sound works on the "Marketplace" version without sharing the aerosoft files

SockelMania

After serveral months of testing and comparing to the real aircraft I have to say this soundpack got pretty well so far. Only a few more suggestions to make it perfect: Remove a bit more of the humming on idle. Seperate sounds between cockpit and cabin more (see video number three, hardly any engine noises in the cockpit). Also the whining needs to be louder / higher and more in the foreground in the cabin (also less humming here). The start up and shut down needs a complete rework from the inside and outside. Can you also try to add some engine windmilling sounds in the future? Master caution in the cabin needs to be fixed by Aerosoft, doesn't it? Some reference videos: https://www.youtube.com/watch?v=l-c8D2KRipg (engine start up outside) https://www.youtube.com/watch?v=NZiQL02otUw (APU start up) https://www.youtube.com/watch?v=MNINOa6GigQ (cockpit take off) https://youtu.be/X1eynj09oAI?t=42 (characteristic idle sound, currently missing) Let's make this soundpack perfect. :)

Luc Gaupin

Can you make the v1.14b an (Easy to Install) version please...

Liam Montgomery

I gotta agree with Luc! I've tried installing the latest update multiple times exactly as instructed and still can't get the aircraft to have any sounds of any kind.

SRT95

I can't get the sounds to work with the v.1.14 update even when following the instructions. Note: I have the ORBX version of the Aerosoft CRJ

SockelMania

Honestly I am still not happy. The exterior are still not characteristically. Also the whining for the interior is too weak.

tangjuice

Excellent sounds compared to the original. Now I want to fly the CRJs even more. I did notice some sounds aren't audible anymore. Overheat test, etc.

tangjuice

Think I just had my first 'freeze' with the new sounds. Anyone else had this happen?

Bill Alicea

Great sounds. Have a suggestion on the air-conditioning sounds. Are you able to increase the volume on that and maybe a but more volume on the avionics too?

John Whitehouse

I've followed installation steps, and while i can hear engine sounds and gear sounds, the following sounds don't work: Switches APU (sound is all messed up from outside view Reverse thrust - no sound No warning sounds

Oskar A

Any plans for an orbx store compatible version?

FTSim+

Did you tried the "v1.14b" ?

FTSim+

The sound works on the CRJ v1.0.18 and on the Pervious Releases - Please install the "v1.14" , ( No need to Relocate the Aircraft main folder ! , keep "aerosoft-crj" inside "Community" ) How To ? : 1/ Make sure the Aircraft at it's default install state ( nothing removed or edited ) 2/ install the "v1.14" ( just extract and Move "CRJ_SP" inside "Community"

Chris Torres

thanks for this. hope you keep this updated. Im a supporter since x plane days..

Chris Torres

One thing i have noticed is that of the rain drops sound while passing thru a gloomy cloud but there is no actual rain. Hope you can check on this thanks

Oskar A

Ah, that one works. Thanks!

FTSim+

settings are Re-adjusted in "v1.15" , try and check if the bug still exist