Home Creators Posts Import Register Favorites Logout

Content

Patreon build of MultiFunPlayer v1.33.10

Below you can find a download link for Patreon only build of MultiFunPlayer v1.33.10

The SelfContained build contains all dependencies and should not require any updates to .NET or VC++. You can use it if the normal build does not run for you and/or you don't want to update .NET.

Full changelog: https://www.patreon.com/posts/122740969

Download: https://patreon-cdn.onrender.com/ac03867a24d57d8c698b5cedf0d52d59

Due to the mega links frequently dying I have setup a simple service that generates temporary links each time you download. If you have any issues downloading let me know.

Quick HOW TO for SLR:

In DeoVR:

Make sure you have Developer -> Remote control enabled in settings

In MultiFunPlayer:

Click on DeoVR tab, if its not visible click on the top-right "plus" button and then click "DeoVR" to add it

Open "Script repositories" (second button from the left, below the DeoVR tab)

Select "SLR" tab, make sure to enable the repository by clicking the toggle so it turns green

Enter valid SLR credentials, you can click the Log-in button to test the credentials and the state should change to "Connected" (you don't need to click it each time you start MultiFunPlayer)

Close "Script repositories"

If you installed DeoVR on your VR headset (like Quest 3) you need to expand DeoVR settings by clicking the arrow button on the right side of the toolbar and change the default IP (127.0.0.1) to your headset IP

Connect to DeoVR by clicking the play button on the toolbar

When playing SLR videos with scripts you should see them load in MultiFunPlayer heatmap

Comments

Mike Lu

I am encountering this error when trying to connect to DeoVR Error when connecting to DeoVR: System.Net.Sockets.SocketException (10061): No connection could be made because the target machine actively refused it. at System.Net.Sockets.Socket.AwaitableSocketAsyncEventArgs.ThrowException(SocketError error, CancellationToken cancellationToken) at System.Net.Sockets.Socket.AwaitableSocketAsyncEventArgs.System.Threading.Tasks.Sources.IValueTaskSource.GetResult(Int16 token) at System.Net.Sockets.Socket.g__WaitForConnectWithCancellation|285_0(AwaitableSocketAsyncEventArgs saea, ValueTask connectTask, CancellationToken cancellationToken) at System.Net.Sockets.TcpClient.CompleteConnectAsync(ValueTask task) at MultiFunPlayer.MediaSource.ViewModels.DeoVRMediaSource.RunAsync(ConnectionType connectionType, CancellationToken token)

Yoooi

You either did not enable the things outlined above, or you have to expand DeoVR settings with the arrow button on the right side and enter your headset IP into the endpoint box.

Mike Lu

Here are the steps I did 1. Connected Quest via USB C Link Cable 2. Open MFP as admin 3. Enter Quest IP and SLR Credentials 4. Open DeoVR in Quest 5. DeoVr Settings > Developer > Remote Control > Enable Toggle 6. Allow firewall outbound and inbound to MFP 7. Connect to DeoVR in MFP still gives me the same error Note: I am unable to see this option in DeoVR settings "Haptics -> Connect to Haptics Connect" is it deprecated? Is connecting the quest via link cable even necessary?

Yoooi

So I dont have a quest but I'm assuming the link cable means DeoVR is running on your PC? If so then you have to enter "127.0.0.1" as the IP. But you can also run DeoVR on your quest and connect it to your wifi, then you have to use your quest IP. "Connect to Haptics Connect" indeed seems to be removed so it is probably always enabled.

Mike Lu

Ok it worked now I just had the ip configured wrong on MFP. My second problem is that I have my SR6 flashed to tcode 0.4b, is this version of supported? My SR6 is not moving when playing a video from SLR via DeoVR. Do I need to download the script to MFP or should the script already be automatically detected when playing a video?

Yoooi

The script will be loaded automatically. Does the heatmap show up in MFP when you play a video, or is it always empty? If it shows up then you probably didnt add an output at the bottom of MFP. If it doesnt then something is blocking connections from DeoVR to MFP, most likely you have to allow it in windows firewall. Also if you are using a VPN then you might have to check an option that allows local connections.

Mike Lu

Heatmap does NOT show up at all. I have tested adding out via Serial Com, UDP and Web Socket, and they all trigger the home reset for the device which leaves me to assume that the SR6 is communicating with MFP. I have added an inbound and outbound rule to allow all ports for MFP in my windows pc. Not sure what else I am missing? I'll see if I can capture any communication via wireshark. Also tried FAPTAP via Web input and SR6 is WORKING (even though heat map is not displayed) (Did not work on Edge or Chrome browser).

Yoooi

Web only works on the specific window that MFP opens, it is based on edge internally. When you hover over the heatmap check which axis is selected, if its not L0 then use scroll wheel to select L0. I wonder if the "Haptics" settings section not showing up is a bug, because it was always required. Could you change log level to trace via application settings at the top of the window and then connect to DeoVR+SLR, try playing a video in DeoVR, and DM me the logs?

Mike Lu

Hmmm I redid the outbound firewall rule and it seemed to do the job. Thanks for all the support!

flowx

where can i find the pw to unzip the file?

Yoooi

There is no password anymore

ReBAR4

Mega says the folder link is no longer available.

Snowsis

Update Mega link please

Yoooi

Sorry, updated.

aduns13

The mega link has been canceled

Yoooi

Just checked, the links work fine.

7Jers3y2

hey bro, i think this is crashing my pc. love your work otherwise. keep it up!

Yoooi

If your PC is BSODing then the logs wont show anything, you need to check event viewer. You are the only one that has PC crashing so im certain that its not MFP problem. Maybe your PC is overheating, or maybe your drives are dying.

7Jers3y2

Thanks for the reply, ill continue searching.

Pnthers189

Hi, @yoooi I’m a huge fan of your work. Thanks for all you do. Your interface is very simple and easy to use. My question is about central intiface, does MultiFunPlayer player support sr6 on central intiface with single or 6 axis? Thank you!

Yoooi

It would support 6 axis but buttplug only implements the stroke axis (L0) for TCode devices. Once buttplug updates to support other axes MFP will automatically support them too.

hue04476.test1

how to use the FapTap script repository? doesn't load faptap script after turn it on

Yoooi

You have to use the "Web" media source for it to work. It does not work with other media players.

Yoooi

Ok, it seems like they changed the urls of the scripts for newer videos, like 2 weeks ago, the older videos work fine and the script is loaded. I'll see what I can do to fix this.

Yoooi

Fixed, will be in v1.33.2, thanks for the bug report, for now i guess just the new videos don't work.

hue04476.test1

thanks, may i ask how to transfer config setting such as key binding from old version to new version?

Yoooi

You can either copy "MultiFunPlayer.config.json" file to the new version folder, or you can extract new version on top of the old one and replace files.

Yoooi

I updated mega link for now

지텍 토

메가 링크를 접속해도 삭제되었다 나옵니다

Yoooi

Just use the first link, no one reported any issues with it. It's annoying to constantly regenerate the mega link.

Jeri

There is no problem with using Jellyfin, Heresphere, but when I try to connect with Stash through the web, the script doesn't work with the video. No matter what video I run, it will be marked File:stream and the script will not load. Script repositories -> Local, Stash enable Script repositories -> Stash -> Local match type : MatchToCurrentFile Dms : none I have completed the settings above, but still do not recognize the script May I ask for your advice on this matter?

Yoooi

The video will be detected as "http://ip:9999/scene/id/stream" so that is correct. The id is the scene id in stash. Is your stash app running on the same PC as MFP? If its not then you probably just have to add a script library under local repository pointing to a folder with your scripts. You can also use the DMS matching option so that MFP will download the script attached to the stash scene. I just tested Web + Stash without dms match and it seems to work correctly.

Jeri

Before all the problems, thank you very much for your reply. That's right, I'm running both mfp and stash on 1 pc. I tried dms function, but script still didn't work. Below is the part I tested. 1. When I selected the script in L0-script-Load, it ran normally. Of course, the script didn't work automatically when I turned off the video and ran it again on the stash. 2. After changing the script name of one video to "stream.funscript", the script was automatically linked. 2-1. In this state, this script(stream.funscript) was automatically linked and executed on all videos.

Yoooi

Thats strange, I would need to see logs. Change log level to trace via application settings at the top of the window, then try playing a video from stash with stash repository enabled, change log level back to info and either upload the latest log file to some temporary host or DM me on Discord/EroScripts.

7Jers3y2

is there a way to copy shortcuts to new version?

Yoooi

Copy "MultiFunPlayer.config.json" file from old version to new version.

7Jers3y2

gg thank you

Naill

After Entering Heresphere repository credentials and connecting to heresphere over wifi scripts dont sync. am i missing some step?

Yoooi

What site are you watching the videos from?

Naill

Czechvr and badoinkvr

Yoooi

i would need to see logs to know what is happening exactly, can you change log level to trace via application settings at the top of the window and then try playing a video with script from both of them, then change log level back to info and DM me the latest log file, patreon does not allow attaching files in DMs so you will have to upload it to some temporary host, or DM me on eroscripts/discord

Kice

Did you changed the plugin system or just .NET9 AOT acting up?

Yoooi

You would have to be more specific about your issue. There was a plugin system redesign in v1.32, recently in v1.33.1 there was an api change around KeframeCollection.

Kice

Looks like `AsyncPluginBase` and `SyncPluginBase` got removed from the assembly. ```c# using MultiFunPlayer.Plugin; namespace Plugin; // This will work public class ExamplePlugin : PluginBase {} // This won't // public class ExamplePlugin2 : SyncPluginBase {} ```

Yoooi

Yea the whole plugin system got redesigned in v1.32, the old one was weird and limiting. Here are some samples for new plugins: https://gist.github.com/Yoooi0/a5976f75574e09cc683aec01a1df804c The equivalent SyncPluginBase would be: public class Plugin : PluginBase { protected override void OnInitialize() => StartThread(token => { //Execute() code }); } For AsyncPluginBase equivalent you would use StartTask. For full api you can just goto definition of PluginBase in visual studio, or check the MultiFunPlayer dll directly.

Douglas Blumeyer

I just got a new computer and so set everything up again. It used to be that within DeoVR I could seamlessly switch between streaming SLR content and local files w scripts, and both controlled my SR1 just fine. Now I'm finding that while in both cases the script loads (and heat map displays in MFP, and axis value bars are animating) my SR1 is only affected by them when through SLR. Any idea what could be causing this problem? I also note that the Serial remains in "Connected" state even when I unplug my SR1, which suggests it's connecting to something else, but I don't know how to prevent that.

Douglas Blumeyer

okay I think it's working now once I connected to COM4. But I couldn't get that option to appear at first. I can't figure out what causes which COM numbers to appear at which times, and why sometimes one works but not another.

Yoooi

Your usb ports might be slightly broken so they dont make connection at certain angles, same thing could happen to your cable. Once you set the com port in MFP it will auto select based on device ID when you try to connect the Serial output, so you dont have to select it each time.

Ara

I’ve been experiencing an issue with this version: the AXIS VALUES gauge doesn’t animate, and the toy frequently fails to respond as well. Do you know what might be causing this? For reference, everything works normally in version v1.31.3.

Yoooi

I don't know what may be causing this, I don't know your setup. Does this happen on a clean MFP or only when you change some settings? Is the heatmap visible when axis value stops updating?

Ara

Yes, the heatmap is visible and the seek bar progresses correctly in sync with the video playback. I haven’t made any changes to my MFP settings. The same issue occurs in both v1.33.5 and v1.32.1 — the AXIS VALUES gauge doesn’t animate, and the toy doesn’t respond. I’m using MPC-HC for video play. I’ve also tested this with a different toy, and the same symptoms appear, so I believe the problem is likely on the MFP side. For comparison, the free version v1.31.3 works perfectly with no settings changed.

Yoooi

My only idea is you have script bypass enabled, the L0 would turn red if that is the case. I'm pretty sure its something you configured causing this, as if there was such a bug then a lot of people would report it. The toy does not matter, the toys get sent the same value as in the axis values preview, if that is not updating then all toys wont update. You can try starting a fresh MFP extracted to a new folder. If you still have the same issue even on fresh MFP then I would need logs. Start a fresh MFP extracted to separate folder, setup your video player and toy, change log level to Trace via application settings at the top of the window, restart MFP, reproduce the issue where the heatmap is visible and is in sync with video but the axis values it not moving, stop MFP and send me the logs folder in an zip/rar/7z archive. You will have to DM me the file in discord or eroscripts as you cant attach files in patreon.

Ara

Okay! I'll share the screenshot and log on Eroscripts.

Yoooi

Should be fixed in v1.33.6

Ara

Thank you!!!!!

BBCMan

Do you know if there was an update on SLR's end for DeoVR that prevents streaming video/scripts? I'm using MFP v1.33.7 and it says I'm connected to SLR, but (as of two days ago) when I play a video (both local videos and streamed videos) in DeoVR neither the video nor the script loads in MFP. HereSphere works perfectly fine though.

Yoooi

If you are using DeoVR on Quest then windows firewall is probably the issue. I would try temporarily disabling windows firewall to test. But the video not loading in MFP when you play in DeoVR is strange, as this does not require firewall. Video detection is separate from SLR script streaming, if that was somehow blocked then DeoVR in MFP would not connect at all. If you dont manage to resolve this then I would need logs, change log level to Trace via application settings at the top of the window, connect to DeoVR, play a SLR video, assuming the video info and script does not load stop DeoVR, change log level back to Info, and DM me the latest log file on Discord or EroScripts as you cant send files on patreon.

BBCMan

TL;DR, I got it fixed by changing my SLR alias to match my username. I've had my SLR alias differ from my username for well over a year now, so I can't see why MFP would have login issues now unless SLR changed something about their API? Looking at the log, it seems like the issue was that the DeoVR connection was trying to use my SLR alias instead of the username and failing to login (despite MFP UI being green and saying that it is connected). MFP was getting a session expired (cached session login), a not validated response (login code), and then an wrong password response (guessing this failed because the MFP connection was changing the username to the SLR alias, so the password didn't match). Then MFP eventually throws an EndOfStream exception. Originally thought it was throwing the exception when I would play a video with a script— happened for both streaming and local videos/scripts. I thought it might've just been a bug with MFP v1.33.7, so I downgraded to v1.32.1, but I still got the EndOfStream exception. I guess the exception could be unrelated to playing a video, since I get the exception in MFP v1.33.7 without playing a video when it tries connecting to DeoVR. Also seems like SLR still requires you to be logged in to play local videos/scripts— since they even disable the haptics radio buttons in DeoVR when you are signed out in that— so that might explain why local videos/scripts weren't loading in MFP when the MFP DeoVR connection's login was failing? I can shoot you the logs on EroScripts if you want to use them for your own debugging.

Yoooi

Yea I could take a look at the logs, even if SLR login fails in MFP it will connect to DeoVR and local videos and scripts should be still work.

Yoooi

Also what do you mean by SLR alias? If you login in DeoVR using SLR alias then it should work in MFP.

Andre Langley

Wonderful work! Have anyone tried to use it on a Mac? Through crossover or other ways?

Deadlybunny

Is there a place I can go to for some more in depth documentation on MFP? I'm getting a bit tripped up on the difference between shortcut triggers ("press" vs "click" vs "hold" vs "release"). I feel like I understand the intent but haven't been able to get anything other than "press" and "click" to work (and can't really identify the difference between the those two).

Yoooi

It kinda works using bottles on linux, no idea if there is something similar on mac.

Yoooi

"Press" fires the actions as soon as you press down the key, "Click" requires you to press + release the key, "Click" also allows you to specify the amount of clicks, so on one button you can have a click, double click, triple click etc. shortcuts (while "Press" or "Release" will fire 3 times for triple click), "Hold" fires after holding the key pressed for some time. When you select a shortcut there is a "Settings" tab below where you can configure the shortcuts depending on what type it is. There is no full documentation, I've tried to write one multiple times but MFP can be pretty complex when you start tweaking stuff that its easier for me to explain, so just ask if you need help.

montoss

The faptap script does not work I ran it on the web, but it recognizes the video and the script doesn't come out

Yoooi

Did you enable "Faptap" script repository?

Lars Kuemmerling

I am unable to connet to SLR also following the troubleshoot tipps are not helping. Any advise? DeoVR is connected. All settings are as described in the how to. Only SLR changes shortly to orange and then back to red. No matter if I use my credentials or the code. firewall is set correctly

Yoooi

If it goes back to red that means it probably fails to log in for some reason. Can you change log level to trace via application settings at the top of the window, then try connecting to DeoVR/SLR, then change it back to info and DM me the latest log file on Discord or EroScripts, or you can upload it to some temporary host and DM me the link on patreon (since you cant DM files on patreon).

James Denton

I'm having a similar issue but I can fix it by toggling haptics connect off and on in DeoVR/SLR but have to do it every time I reconnect MFP

Jeffery Keovorabouth

Hello! I recently encountered a problem where script stopped working with SLR using Deovr. I followed the steps under troubleshooting but it doesn’t seem work. I also read through comments about alias and username need to matched and it does. Any ideas? I appreciate all you do!

Yoooi

Do you use DeoVR on a Quest or PC? When did the scripts stop working? In general it seems after DeoVR v15 a lot of people fixed it by disabling/enabling haptics connect. Did you try disabling firewall?

Jeffery Keovorabouth

Yeah, this is on the Quest. It was working a few days ago by toggling haptics connect off and on, but that doesn't seem to work anymore. Looks like DEOVR just got an update yesterday.

Yoooi

It seems that in the latest deovr update (v15.1) the script support for Haptics Connect is purposefully disabled, solution for now is to use v14 as long as you can or downgrade from v15.

Yoooi

It seems that in the latest deovr update (v15.1) the script support for Haptics Connect is purposefully disabled, solution for now is to use v14 as long as you can or downgrade from v15.

Jeffery Keovorabouth

Yup, that’s unfortunate. But that’s exactly what I did. I was able to downgrade to v14.9 using sidequest.

Pnthers189

I too am unable to find a solution to link mfp to deovr. Everything says connected, I followed troubleshooting to every detail. I noticed deovr has a built in tcode toy connection, anyway to route my sr6 through that? Is there a way to connect the sr6 through haptics connect Bluetooth mode? Thanks for all help!

Yoooi

Currently only solution is to downgrade to v14, in v15 they purposefully disabled scripts via Haptics Connect

Pnthers189

Ah okay, got it. I’ve heard of older apk versions of deovr and then to sideload them onto quest3. Do you have any advice on where to find the apk files?

Yoooi

I never used quest so I have no idea, but I have reports from few users that they managed to do that and scripts started to work again.

Pnthers189

Hi Jeff, would you be willing to share where you found the apk file of version 14.9? Thanks!

Pasha Polev

How to download MacOS vers?

Yoooi

MultiFunPlayer was always Windows only, I know some users managed to run it using some application but I cant help there

deedeev

Hi Yoooi - thank you for your work on this project. I previously had v1.32 installed and was able to set up shortcuts using my meta controllers in DeoVR. I cannot seem to get the shortcuts to register in this new version. Has something changed? Better yet, is there a way to 'port' the shortcuts I registered in the previous version over to this new build?

Daniloup

I tried downloading the next version, but everytime I try authification it just reroute me to a 404.

Yoooi

Yea, sorry about that, it seems that patreon is having issues. Should fix itself soon.

geo_gan

Was not working for me either last night, but just worked now this morning.

Daniloup

Yop it worked now

Jugvara

is there a tutorial or something to show how to connect MFP to faptap?

Yoooi

I swear there was one on EroScripts but can't find it, maybe it was on arca. But its pretty simple, under script repositories enable FapTap, and using top right plus button add "Web" source, after connecting to it it will open a new edge browser window, navigate to faptap page and when you play a video MFP will download the script automatically.

7Jers3y2

Is it possible to sync MFP to SLR flat content on their site?

Yoooi

So I thought it should work if you use the "Web" media source in MFP then browse and login to sexlikereal site, but apparently they use a custom video player on their site even for 2D videos. So currently it will work only via DeoVR, but I'll try to support their custom video player so that it works also via the Web source in the next update.

7Jers3y2

Looking forward to the update.