Home Creators Posts Import Register Favorites Logout

Content

Edit: Fixed SRM not launching on Windows for new users!

Windows- Added installation integrity check after install and on app start, checks if everything is properly installed, shows a message in case of error for each emulator that's not installed and tries to install them as it was supposed to be installed but didn't ( SRM specially since it seems to fail a lot )- Fixed Pegasus Themes not being installed SteamOS / Linux- Fixed Pegasus paths. ( Do a reset config to fix your Pegasus installation)- Fixed Pegasus Themes not being applied.- Fixed EmulationStation not recognizing the selected theme on install.

Comments

Riley Sandeberg

How come emudecky constantly notifies me that backup is complete? Is this a known bug?

MCasao

Had to do a reset of SRM and it now loads for me, thanks!

karim

Hi guys and thanks for the update but I still manage to get issues with EmuDeck while trying to load SRM… nothing happens and I’m stuck unable to do anything…

Bert Gomez

I still have two Pegasus under manage emulators and keeps asking to reset config for yuzu and Pegasus

DAVID EVANS

I'm wondering this too. I do know if you search for Pegasus emulator it comes to a complete front end like Emudeck but, all manual to config. I know there is a lot of themes with it and Emudeck might use them.

EmuDeck

It’s like EmulationStation

EmuDeck

Will take a look in a few hours

Paul Hughes

does anyone know if i can create a desktop icon for emulation sation so i dont have to open steam to launch it every time?

Tim1337

The Rom Manager still doesn't work on ally. Make no sense to install the EA for me. Its a pitty about the pledge.

Joe P

ROM manager works for me on my Ally. What problem are you having?

Matheus

The emulators via EmulationStation here on my Rog Ally via Steam stopped working. It is giving the following error: "ERROR: missing emulator find rules configuration for name emulation"

EmuDeck

which message do you get no repeat?: CloudSync Completed! or CloudSync ready!

EmuDeck

if it ask to reset yuzu is probably because you are trying to change the default controls

EmuDeck

Don't run anything as admin unless asked for

EmuDeck

Its already on your start menu

EmuDeck

Do a reset config for ESDE from EmuDeck

EmuDeck

Do you have antivirus enabled?

Riley Sandeberg

CloudSync completed! Maybe 3-5 times a minute

karim

Nope i removed it on purpose to prevent from anything

Matheus

I did this, but it keeps giving me an error. It all started a few minutes after this bug fix post. When I open it directly in the emulator app, for example YUZU, it works normally.

Jeremy Kurowski

ran Emudeck without admin privileges, same issue.

remii latte

When I click on "steam rom manager" for windows, a window pops up that says "Launching Steam Rom Manager" with a progress bar, but nothing happens. Is this a know bug?

david f

Mac version please

Alan Lee

Just installed and got pcsx2 working. Seems good so far. I was confused about where to put roms though as i had no rom folder and had to make it myself. Dont know if you coan create the folders automatically but that might help a noob like me in the future.

Marc M.

Hi pegasus keeps crashing as soon as game list is loading on my windows handheld. The startup animation is ok, The games and box art are showing, but there is a loading animation on the mouse location and then just crash. Still, Emulation station works flawlessly so i have an aternative

Paul Hughes

oh haha my bad thank you

moukies (edited)

Comment edits

2026-09-05 07:00 I keep getting the cloud sync notification in SteamOS, keeps pinging me constantly, switching between "uploading..." and "Cloud Sync Ready!" It kept pinging me a "disabled" error too, even though it was enabled. The lattermost started yesterday after I updated from within Decky, but the former issue has been going on for weeks now. I've had to uninstall it just now because the pinging was incessant. I would love for it to just pop up only when syncing or completed, instead of telling me a sync is ready (it sounds like it's "available" to do instead of done? I'm not sure what it's supposed to convey). Also, Pegasus is installed but where is the .sh for it? I don't see it in my launchers folder, even after resetting the config (which previously told me it couldn't reset/kept failing -- just started working today).
2023-12-12 00:25

waldo1263

I experienced this too. I noticed the powershell script for it was missing so it was never able to start SRM and doesn’t provide any useful error. I did an update of all the apps from EmuDeck and SRM eventually got added.

remii latte

I’ve tried that multiple times and it didn’t change anything :(. Just tried a few more times and it worked! Thanks again.

Nova is a Boss

This is exactly what is happening to me too

Andreas Reiner Szallis

Existing Installation on PC and on a fresh Installation, with the previous Version first and the only difference, that I couldn't see / read a thing, because the font colour was wrong: https://imagizer.imageshack.com/img922/8541/dACrtM.jpg Also, on the Ally I had to start the .bat several times, because it did parts of the Installation and then quietly just stopped and closed, but resumed then afterwards, when I restarted the .bat again, like it went always a step further, after a restart of the .bat, which was strange. The Ally is completely fresh installed and has no other game clients nor other games installed yet, so maybe that Steam is not installed yet, has an influence ? But it shouldn't, because I didn't start Emulation-Station or Pegasus nor any of the Emulators yet. The Orange-Tick-Issue is still present too. The Double-Pegasus doesn't get fixed in an existing "fucked" Installation. The missing small Pic of the Pegasus Icon not either. Steam-ROM-Manager is not opening anymore on PC, with an existing Installation. Don't stress-out about it ! :)

EmuDeck

the rom folders are created automatically Emulation/roms/ps2 for instance

EmuDeck

It's always nice to have alternatives :)

EmuDeck

I've changed the messages that emudeck shows, let's see if it's better now, open EmuDeck to rebuild the backend and that's it.

EmuDeck

I've changed the messages that emudeck shows, let's see if it's better now, open EmuDeck to rebuild the backend and that's it. PS: Reset SRM to get the Pegasus launcher .sh

EmuDeck

- Orange tick issue: should be fixed now on 2.1.35. - Bat issues: I've also made some changes to the installer now, should be able to finish the installation without launching the bat more than once ( a restart was needed if git was not found, but not anymore) - Double Pegasus - I'm gonna need to take a better look at this. - Missing Pegasus icon - That's probably on the double fake Pegasus, the other one should have it - SRM no opening: That's fixed

EmuDeck

try again, this has been finally fixed

EmuDeck

try again, it's been fixed!

Cameron Jones

I did a quick reset and updated all of my emulators but pegasus is still not working.

Flukas McDoogle

I am not a developer. I often wonder if Linux is simply easier to program for than Windows. Either way, you put in a ton of work on this, thank you. What you do is appreciated.

Phoggy

At some point Super Mario Wonder lost my game save data in Yuzu. Does anyone know how to get it working again? The game save file is from October, which is likely the last time I played it, but I had a lot of progress and don't want to lose it. I am wondering if something got disconnected during an Emudeck update.

J

I'm not sure if I'm doing anything wrong but windows 11 doesn't have an app to open the BAT file with

ExtremeElementz

Curious if I have a setting not setup correctly or not but when I restart my computer and launch Emulation Station it seems to forget my theme and I have to switch it to Modern each time, this isn’t normal right?

Juan Betancurt

Opened up emudeck and it says update found- ‘’emudeck will restart as soon as it finishes the update hold on tight’’ . It’s been 25 mins it shouldn’t take that long right ? Windows version

Vergil

-nogui commands for duckstation and pcsx2 do not work anymore, is there anyway to fix this? i also tried -batch -fullscreen -bigpicture without success :/

Mr_Karate

No emulators will launch for me since this update. Everything hangs on the black Emu Deck screen indefinitely.

Ben Merriman

None of the emulators show in manage your emulators section. Tried uninstalling it and reinstalling it but nothing happens.

den

New user on an Rog Ally here. Steam ROM Manager does not launch after a fresh install. Tried everything from resets, to reinstalls, switching to different networks, to even a fresh Windows install. Edit: For whatever reason, it works now.

JRush64

Does Xenia emulator support cloud saves? Even though I see downloading xenia saves, its not in the folder on the cloud or even the saves folder on my pc. I did install Xenia after I setup cloud saves. Do i need to setup cloud saves again?

Sérgio Silva

Hey tried to reinstall emudeck but i cant launch steam rom manager on the ally... Please some help. Uninstaller seems to hang too like a black screen. Thinking on giving up really...:( edit:bios checker also not working...

Sérgio Silva

having same issue do you have any idea what you did to get it to work?

Kirill

same issue steam rom manager not launching on rog ally

mcwillzz

Adding to the list of people who can't get SRM to launch on the Ally -- Also, the uninstall option within EmuDeck does not work either.

Not_Sebastian69

How do I get gba controls to work on steam? I’m trying to run Sapphire and fire red but D pad is the only control that does anything.

ChatGPT

Hello, i installed Emudeck on my Windows PC yesterday, now that i tried to play it ask me again for the whole process

A A

When using vita3k with SD card on ROG ally, firmware installation stops at 70% and does not complete. This can be avoided by temporarily setting the vita3k folder specification to the default, and then copying the entire folder to the SD card and specifying it. Also, the key mapping in PPSSPP is strange in its initial state, with △ and ⬜︎ reversed. This can be remedied by resetting the key mapping settings.

Kirill

On rog ally: - Uninstall not working - SRM not working

EmuDeck

send me a DM if still failing

EmuDeck

linux is 100000000000% easier than Windows.

Benjamin Tracey

Hello, I'm having trouble with both Switch games via Yuzu and 360 games via Xenia not launching from Steam after adding them with Steam Rom Manager. They attempt to launch and a console opens up, but then it closes out and the game does not launch. I've tried doing a custom reset, reseting SRM configuration, reseting Yuzu configuration, etc. They launch fine out of Emulation Station.

CuzzinChizzy

just signed up for the patreon and wanted to checkout the cloudsaves feature between windows and steam deck. In the windows EmuDeck app, I’m not getting the option to set up cloud saves. It just takes me back to the join patreon page. Is there way I can link my patreon sub to the windows EmuDeck app? Thanks!

Benjamin Tracey

I'm also interested in this, between Rog Ally windows and ChimeraOS PC. I have it set up on Ally but don't get the option to link cloud saves on ChimeraOS.

Darrell Cabilangan

Hi, I can't seem to make the SRM launch. I tried reinstalling Emudeck, but still the same. Any help is appreciated. :) Thank you.