Home Creators Posts Import Register Favorites Logout
haven't archived this post yet. have a subscription? use the importer!

Content

My Riso is in my house, complete with cat toys surrounding  it, cat hair constantly creeping into prints and cat paw prints across my printing workspace!! I've owned my Riso for 9 months now and have some thoughts I'd like to share about owning a machine.

Should I buy a Riso? If you check yes to all of the questions below then yes, I think it's totally reasonable for you to get a Riso!
1. Have you used a Riso at a studio before and know how it sounds and generally works?
2. Do you feel comfortable knowing what to do for easy fixes? Like how to change a master roll and how to call when you need tech help?
3. Do you have the space for it? A lot of the reason why I put off buying a machine for so long was because I didn't have enough space in my Brooklyn apartment (plus it was a 4 story walk up). I would suggest owning a Riso in a studio space or on the first floor of an apartment.
4. Do you have the patience to troubleshoot when things go wrong? You don't necessarily have to have a lot of knowledge on how to troubleshoot, I certainly don't know everything about my Riso and I'm learning new quirks about it all the time, but I know if things go south I'll need to put the time in to figure out what's happened. But, when I get really frustrated and feel helpless I know I can always call a tech nearby, which leads me to my next question:
5. Do you know who your nearby Riso tech would be? This is info you can find through the Riso LLC website, or just by calling/asking around and asking nicely who other local Riso printers use when they're in trouble.
6. Do you have the funds for a Tech visit if you're in a pinch? and do you have the funds for constant ink, paper and master purchases? Risographs are expensive up front, but there are also consistent costs. Inks are generally $40 each, masters are $65 and drums can be anywhere from $500-$1,000. My EZ 590 U was $2,500 and it's slightly used. Each time the tech comes it's $200 flat.
7. Are you going to print on it all the bleeping time? Riso ink goes bad in a year, drums dry out if not used once every 2 weeks or so, and drums take up space. It's only worth actually getting a Riso if you are printing regularly and selling prints/books or doing workshops!


Ok, this is for everyone who's not so sure they're ready or who can't say yes to all the questions above:
Should I apply for a class or workshop at a local Riso studio? Or book time like at the RisoLAB?
Yes!! Always yes, (even if you own a Riso)! Workshops and classes are a great way to test out a new Riso, new colors, meet new people excited about printing and build your Riso community!
Workshops and classes are a great way to learn new Riso techniques and build your skills as a printer too. I think my time at the RisoLAB, where I could learn at my own pace, was invaluable. I booked time each week to use the machines, which made HAVE to print something during my time slot. That meant I was experimenting a lot, learning a Riso's limits and building my knowledge of the machines without the burned of owning one.
If you aren't familiar with the Riso process and want to do more printing then workshops and classes are a must. It's worth knowing exactly how the machines work so you can test the limits and get the style of prints you desire! It's also helpful to learn from a Riso guru (who are always very passionate about sharing their Riso knowledge)!
Studio time is a must if you like to have a bit of control over the process. I did a lot of testing before I made my first successful 3 color print that I was happy with and that meant printing, tweaking, printing, tweaking, hating it for a week and then doing the whole process over again. If you get prints made from a printer they'll offer some edits after masters have been made, but nothing drastic. I sometimes change whole colors that I found weren't working in the final print!


Is it best to get my work printed in Riso from a shop?
Yes, especially if you're brand new to Riso! The printer will have comprehensive advice on how to make the best print and they're pros so they'll be able to walk you through the process, to an extent. They're usually just one or a few people so please triple check the printer guides before you send for final printing! They have the best Riso's, tools, and experience and will make your work look great.
It'll also help you understand how much Riso printing costs. Risolve just added a really easy Riso print calculator on their site if you want to check it out!
If you're not looking to totally commit yet then printing with a printing studio is a great entry point. They're also great for the pandemic right now. They're a great way to keep selling Riso prints and experimenting with Riso while you can't be in a studio or take workshops. Some studios are getting really creative with workshops, though, so there might be ways for you to get some Riso experience during the pandemic anyway! I'm still considering working with some studios because I don't have time to fold, staple and cut many books anymore and I don't have many colors I'd love to try out! I'm considering getting another color drum but before I do I'd like to test it out with a project (maybe sunflower yellow or Aqua)!

Ok! That's pretty much it! Remember, if you're going to buy a Riso buy from a trusted Riso source (not just off Instagram like my dumb butt did). You can find your authorized local Riso dealer through this site: https://us.riso.com/service-support/authorized-providers/

Good luck and happy printing!!
-Nat

*Added info Jan 15, 2020:
In favor of buying a machine- I can bleed all the masters I want and be as picky as I want! This is a huugggee plus of owning my own machine. I don't have to feel self conscious about asking anyone to redo masters or tweak values that I'm unhappy with. Usually print shop standards are very high but I like to change values that aren't working and I have a lot of anxiety about appearing rude or annoying to printers so having my own machine was a must. Plus I can spend as much time as I want with a print. Sometimes at the RisoLAB I would need to spend hours on a print but would only have 2 hours booked. It would be demoralizing and disruptive to stop and have to start back up on another day (especially when I've traveled all the way to Manhattan to print- some days I would spend the entire day there just to see if someone would end their session early so I could continue). There were also frequent times where the first machine I printed on was not available, so I'd have to print on a different machine, which would ruin my perfect registration (you can't really print on a different machine once you have a different machine's first color laid down). Each Risograph machine has it's own quirks and going back and forth between two or three machines for a book or project is impossible unless you coordinate it with pages that won't be printing on top of one another and keep them separated by machine! 


Files

Previews only

Comments

Katie

thank you for this! I’ve always wanted to work with Riso and I just booked my first workshop this month to get started. I subscribed to your Patreon for Riso insights and for inspiration. 💗💗💗 Happy new year!

Susan Zavala

This is fantastic information and I appreciate all the details that I had wondered about in the past. I now know my best bet is to keep buying your prints!😊especially since you already did all the heavy lifting!!! Plus your amazing talent helps too! Thanks much!

Natalie Andrewson

Amazing!! Who did you book your workshop with if you don't mind me asking??! Happy New Year and thank you again :3

Natalie Andrewson

I just edited the post above but will add it here to make sure more people see it- In favor of buying a machine- I can bleed all the masters I want and be as picky as I want! This is a huugggee plus of owning my own machine. I don't have to feel self conscious about asking anyone to redo masters or tweak values that I'm unhappy with. Usually print shop standards are very high but I like to change values that aren't working and I have a lot of anxiety about appearing rude or annoying to printers so having my own machine was a must. Plus I can spend as much time as I want with a print. Sometimes at the RisoLAB I would need to spend hours on a print but would only have 2 hours booked. It would be demoralizing and disruptive to stop and have to start back up on another day (especially when I've traveled all the way to Manhattan to print- some days I would spend the entire day there just to see if someone would end their session early so I could continue). There were also frequent times where the first machine I printed on was not available, so I'd have to print on a different machine, which would ruin my perfect registration (you can't really print on a different machine once you have a different machine's first color laid down). Each Risograph machine has it's own quirks and going back and forth between two or three machines for a book or project is impossible unless you coordinate it with pages that won't be printing on top of one another and keep them separated by machine!

Katherine Webster

Thanks for this! I made the leap and bought a riso this summer, there was nothing in my area to do workshops etc locally, so I just went for it, after doing what research I could. It needed repairs when it arrived and still has quirks, but overall it has been a positive shift for me and already opened up new art opportunities! I took a RISOlab course online (it was great and met so many excited riso people) however we couldn’t actually print of course. My favorite online workshop so far was with Outlet in Portland. They shared so much detail about their process. And they had different tiers of $ to participate. Thank you for everything you share here, I’m learning so much from you and so excited by your artwork 🔮