Chapter 229 In space with a junkyard ship (Patreon)
Content
--
Book 4 is published on Amazon (link here). Thank you all for all the support you have shown😊
--
It has been a good while since I was last able to control so many drones so directly for construction. Bob has also whipped them into quite the shape. Their accuracy and knowledge of their own limits are beyond what I expected.
Usually, the biggest problem controlling swarms of drones to do something is overextension. It’s easy enough to see a crate needing to be moved. You look at its size and go, it needs two drones from either side to lift it and carry it to the position you need it at, only to find that it’s a lot denser and more fragile than you expected.
That would result in cleanup and delays most of the time. Now the drones are good enough at predicting the results of their actions. The sensors I put into the design to help them figure out their environment have led to this result.
They are now basically at the same level as a human touching a box can tell that there’s no way the amount of weight that’s inside would simply not fall through when you try to lift it. All of this has been incredibly helpful in dismantling the required parts of the main railgun.
The job itself is quite a joy. All the skills that I have gathered, the strength inside my body, and my cybernetics that allow me to see the world in so many different ways and incredibly accurately have brought me to a whole new level of precision assembly.
Even the ability to handle so many different points of view from all the drones working on this project has revealed some interesting shortcuts. My favorite is using small drones with good night vision to get into tight spaces and see exactly where bolts or self-heating welding knobs should be placed.
My eyes are constantly seeing the finished design blueprint overlaid over the current state of the railgun. Seeing the clean blue lines of how things are going to look and slowly getting closer and closer to reality matching the blueprint is one of the most satisfying things I’ve experienced.
A lot of the crystals are required to guide the bolt and boost its speed and power. The firing chamber itself contains four crystals, and then a cluster of four crystals again near the point where the bolt is created.
The amount of energy required is tremendous, which means that there is a lot of waste heat that simply cannot be contained. Fortunately, the railgun already has an incredibly robust heat management system. That only meant we didn’t need to add anything new, but we did need to upgrade the system.
The high-end materials that are incredibly hard to find that Bob procured in the Holy System will make this upgrade incredibly efficient. Without any heat going through it, just putting my hand on it right now, I could actively feel the heat in my hand being pulled away in real time, and so fast.
If I were to leave it there for only a few seconds, my hand would be freezing; cold damage would follow soon. My cybernetic arm would be able to handle a lot more, but even then, cold isn’t really that nice of an element for cybernetics, or basically anything.
Cold really does get overshadowed by fire, but it’s as destructive as fire. What keeps it down is that it doesn't have as much self-propagation.
This also brings up another problem. We need to have a switch between the heat management system of the railgun and the heat management system of the ship, so that unused equipment wouldn’t be freezing. I don’t like the point of failure, but bringing the heat-pulling effect low enough that it wouldn’t matter would bring down our firing rate too much.
The hardest thing had to be the switching of the firing chamber. The guiding crystals need to be shielded. There went another nearly eight kilos of extremely high-end and durable materials.
The first firing chamber design that we built out needed to be scrapped. It was simply too unreliable as we did the switches. The swinging method simply needed to move too much mass and then align too many things for this to work correctly.
So instead, I went with a sliding design. Basically, the different firing chamber components had slots for the differing components for the two different firing mechanisms. You could pull the components out of each other’s way and slide in the ones needed.
It caused more points of failure, once again, than the original design of simply swinging the entire mechanism from one to another as you would do in a revolver. The thing was that the second design actually worked reliably, even though it would require more maintenance.
When that was finished, we started to assemble as much of the remaining structure of the railgun as was needed while not putting every piece in. These pieces provided additional protection for the ship itself but were mostly decorative. No need to assemble it all if we needed to tear it apart once again if something didn’t work right.
“FH, schedule a dropout from FTL for a weapon test fire.”
“Acknowledged. Choosing an empty space where we won’t be bothered.”
I continued to run diagnostics and checked on the current project date. The disassembly and assembly took us three weeks and two days. Better than I expected, since we needed to change the design of how the firing chamber worked.
It mainly took so long because of the incredibly delicate work and the need to fabricate high-end materials, which always took a ridiculous amount of time. One of these days I really needed to work on making a 3D printer head made out of the highest-tier materials we currently had available.
The only reason I think I could pull off making something like that was through all my various skills and the ability to manipulate mana so precisely.
FH scheduled the dropout from FTL in two hours. Most of that time I spent running additional diagnostics and cycling the power through the entire railgun with different chamber configurations as many times as I could.
No discrepancies were found. The only problem was that this piece of equipment was incredibly close to having a soul. It had been on my mind and was something I kept track of during the entire build.
Using drones to build some of it helped reduce the soul-gaining effect a bit. What helped the most was that this rebuild wasn’t so total, and the fact that it already had an AI.
A lot of the nourishment that went into gaining a soul seemed to have gone into it. What also helped was the soul having enough compatible material to bind itself into.
It was kind of scary to me how much I was learning about souls thanks to my trait and how dangerous it could be. Already, I could do something most others could never do, and that was to destroy a soul simply by killing its body once.
The healers of this universe had a skill called Revive. Lola also has it, so we know exactly how it works. It basically rebinds the soul into a dead body, healing it enough so that the soul can take root once again.
It is easy to do so because the soul is already so familiar with that body and still has a lingering connection to it. If enough time passes, the soul dissipates, meaning you can never bring someone back. My looting ability bypasses that by turning a soul into currency.
Now I also have the ability to influence souls. To be fair, only in my own creations, but I should really be careful about any future skills or developments that would allow me to mess with those other than my bonded. That seems quite taboo to me and, from what FH can tell, to mostly everyone else as well.
Everyone gathered at the command bridge, and so did I, even though I was a step closer to the exit door so that I could rush downstairs if something went wrong. And, of course, there was a whole army of drones ready to act at a moment’s notice if anything went wrong.
“I am not one for speeches,” I said out loud in a booming voice, scaring some of the others for a moment. “So, FH, would you do the honors?”
“With pleasure,” she answered back, charging and firing a hard-light bolt from the main railgun.
We could see outside the ship thanks to all the cameras constantly observing everything around us. Currently, it looked like we were on the bow of the ship, so we could see the exact moment the bolt left the railgun barrel, shooting forward into the emptiness.
It was crackling with power, but that was just my imagination. It looked as smooth and clean as any other hard light bolt. The only difference was that this was the thickness of a telephone pole and the length of a man.
The railgun had all the same features as our other hard light weapons, which meant that we could adjust its range and the moment it dispersed. While that could be useful in some circumstances, I believe most of the time we would require as much penetration as we could get from this weapon.
“Continue to fire.” We would not get much damage data at this time, but we could estimate and get the cycle and heat data required to understand how quickly we could fire and for how long.
To test everything properly, it took us six days. We did multiple heavy firing cycles where we fired as rapidly as possible, seeing how much our heat management system could handle before we needed to slow or stop firing altogether.
We could comfortably hold a fire rate of six shots per minute, but push that up to twelve, holding that for three minutes if we were willing to sacrifice twelve minutes of cooldown after that. The energy requirements were a whole different beast. Our current power core could barely handle it.
It also meant that we couldn’t boost our shields at the same time while firing at our maximum fire rate. The only way to boost our current power core’s power delivery was to make it bigger, and that wasn’t going to happen with our current ship size.
We could handle the heat load of the regular railgun shots a lot better now, which meant we could fire them more often and a bit longer, but only a bit. The problem became the sled itself, as we couldn’t let it deteriorate too much. Otherwise, it risked damaging the hard light components that made up the railgun, and that would cost a lot to repair even if we could get the materials required.
It was going to be a delicate balance between damage output and maintenance mitigation to keep this truly dangerous weapon operational. We also didn’t do everything perfectly. Some of the relays couldn’t handle the constant load, so they needed to be switched out for different designs.
I was also quite certain that over the course of many battles, we would find new problems and things to improve, but right now the upgrade was done, and we were once again a lot deadlier than before.
While we should still fear ships that were bigger than us, they would soon learn that taking us down now had a real cost. And no true predator wanted to attack something that could kill it back.