Home Creators Posts Import Register Favorites Logout

Content

While I'm by no means the most expert PC builder I thought I'd share the process with y'all — hopefully it comes in handy one day!

Last time I built a PC for my home studio in January 2024, I told myself two things:

I’d never build my own PC again (too much research, too stressful).

I’d never go with an AMD build again (if you remember my Kinect-related issues from this post).

Well… I ended up breaking both of those vows. Keep reading to learn the whys and whats!

Here’s the parts list if you want to skip the story time:

With the studio (DEREAL Studio), which I co-founded with my friends, we do all kinds of installations — including the CRT TV projects we’re somewhat known for. I needed a build that was portable enough to lug around but still powerful enough to handle at least 2×4K rendering. That allows us to drive up to 32 TVs in one spatial rendering system (I’ll share more about that one day).

We had been using an older 3080 laptop, but it just couldn’t keep up with our pace. So we’ve had to fall back on my home PC setup very frequently: a full-tower 4090 build. That thing is a backbreaker and a hassle to move in and out of my home. And honestly, we’re all getting older and already carrying enough heavy gear (like hauling dozens of heavy CRTs to the 4th floor of an abandoned building, ugh). This new build isn’t a fully optimized “travel rig” — that would’ve required a bigger budget and more compromises — but at least it’s more manageable. We’re also not planning on traveling overseas with it.

I set a max budget of about 2k EUR net (~1600 EUR gross). I first checked some Mini ITX pre-builts, and the closest one to my specs was about 2600 EUR net. Putting the same parts into PCPartPicker came out to around 1800 EUR if I built it myself. That made me break my first vow — building again — to save money. It also gave me the chance to fine-tune the specs for my needs, at the cost of spending way more time researching.

The first part I actually picked wasn’t the GPU or CPU — it was the case. While browsing pre-builts I fell in love with the DeepCool CH160, mainly because of its super handy handle on top. So that decision was easy. (In hindsight probably would look for a case with no glass though).

Next came the GPU. It had to be NVIDIA, since TouchDesigner really benefits from NVIDIA GPUs and their extra tools (Flex, Background Removal, Upscaling, etc.). The GPU market right now is kind of a mess — the RTX 5000 series was underwhelming, and older generations aren’t produced anymore, so the only options are overpriced leftovers or the used market. Even older high-end GPUs like the 3090 or 4070 Ti Super go for crazy amounts. Used is an option, but since we’re a business dealing with taxes, buying retail is just easier.

I went with the RTX 5070 Ti: 16 GB VRAM (the main spec I cared about) and about 800 EUR retail in Germany. It was by far the most expensive part of the build, almost half the budget. Different vendors offer slightly tweaked versions with different coolers and housings, but I landed on the MSI INSPIRE 3X OC PLUS — the second cheapest, metal housing, and about 2 cm shorter than the others, which gave me some much-needed cable space.

Next up: the CPU. For TouchDesigner, the most important metric is base clock speed — since TD runs mostly on a single thread, high thread counts aren’t very relevant. Extra cores help for things like video playback, running multiple TD instances, or TouchEngine, but the main priority is raw single-core speed. (Derivative has a blog post on this that’s a bit outdated but still useful.)

That left me with the classic fork in the road: Intel or AMD.

Like I mentioned earlier, I swore off AMD after all the Kinect headaches (see this post) and was seriously considering Intel, especially the new Core Ultra series as they run less hot than their last gen. I almost hit “buy” on a Core 5 with a high base clock. But after more research, I realized Intel has been on a downward slope with innovation and price/performance. On top of that, AMD has been more consistent with socket support, claiming AM5 will last through 2027.

So I gave AMD another shot and landed on the Ryzen 7 7700X — good base clock, not overloaded with cores, and a solid balance for my needs, and not too expensive.

But this brought me back to my old nemesis: motherboard USB controllers. Kinect hates ASMedia controllers, and unfortunately most AMD motherboards use them. Manufacturers rarely specify which controller is used for which port, which drove me crazy. Eventually, I found the Gigabyte X870I Aorus Pro Ice, which clearly listed its USB mapping: while most ports were ASMedia, two ports went directly to the CPU — perfect for Kinect. It also supports USB4, which is a nice bonus.

With the major parts chosen, that left cooling, RAM, and storage.

For cooling, Mini ITX builds don’t usually play well with AIO water coolers (my 4090 tower has one), so air cooling was the way to go. I went with the well-reviewed Thermalright Peerless Assassin 120 SE, plus two Arctic P12 Max case fans I had left over from my previous build.

For RAM, 32 GB is plenty for TD. It’s easy to upgrade later if needed, but I wanted something decent for latency and speed (within what the mobo supports). RAM isn’t too expensive overall, so I grabbed Crucial 32 GB — solid, affordable, and no unnecessary RGB.

For storage, 2 TB SSD is more than enough. I usually stick to Samsung drives, but this time I skipped the 990 Pro to save cash and went with the Samsung 990 Evo Plus. Still excellent performance for playing back big video files, which is the most demanding thing storage will have to deal with.

The build itself was not too stressful in the end, seems like this is also one of those things that gets easier the more you do it. I had some hassle with the cables of course in this small build, but some cable ties in the right places solved the situation. Everything fit super neatly in the end!

First thing I did was check Kinect. After installing the V2 drivers and rebooting, it worked perfectly, connected to the direct CPU USB port!

Still some benchmarking to do, but that's basically it! Hope this gave you some insight, and ideas for your next PC build!

Look, it even fits into my 35L travel backpack (I can close it too)!

---

PCPartPicker Part List: https://de.pcpartpicker.com/list/psVLmC

CPU: AMD Ryzen 7 7700X 4.5 GHz 8-Core Processor (€249.00 @ Mindfactory)

CPU Cooler: Thermalright Peerless Assassin 120 SE 66.17 CFM CPU Cooler (€43.89 @ Proshop)

Motherboard: Gigabyte X870I AORUS PRO ICE Mini ITX AM5 Motherboard (€286.99 @ Mindfactory)

Memory: Crucial Pro Overclocking 32 GB (2 x 16 GB) DDR5-6000 CL36 Memory (€91.90 @ Amazon Deutschland)

Storage: Samsung 990 EVO Plus 2 TB M.2-2280 PCIe 5.0 X2 NVME Solid State Drive (€130.27 @ Proshop)

Video Card: MSI INSPIRE 3X OC PLUS GeForce RTX 5070 Ti 16 GB Video Card (€846.99 @ Amazon Deutschland)

Case: Deepcool CH160 Mini ITX Desktop Case (€53.63 @ Proshop)

Power Supply: Corsair SF750 (2024) 750 W 80+ Platinum Certified Fully Modular SFX Power Supply (€169.90 @ Amazon Deutschland)

Case Fan: ARCTIC P12 Max 81.04 CFM 120 mm Fan (€6.89 @ Aquatuning)

Case Fan: ARCTIC P12 Max 81.04 CFM 120 mm Fan (€6.89 @ Aquatuning)

Total: €1886.35

Prices include shipping, taxes, and discounts when available

Generated by PCPartPicker 2025-08-23 03:47 CEST+0200

Files

Comments

setsun

I'm having this exact dilemma with hitting limits with my laptop for live A/V gigs, and considering pulling the trigger on a portable PC build. Thank you for sharing what worked for you! Super helpful.