Home Creators Posts Import Register Favorites Logout
haven't archived this post yet. have a subscription? use the importer!

Content

After finishing the resin cast horns for our recent rabbit suits, we want to share the process we went through to make them. It was a very long and frustrating journey, and I will split it into two posts with the first on the pressure casting setup and the second on the actual mold and resin. 

Please note that this is NOT a tutorial, only our personal process and how we made it work. We do NOT recommend this to anyone, as it can be unsafe and there are many things that can go wrong (and many things that did go wrong for us). We just want to share the experience and after seeing lots of compliments on our horns I really wanted to go in-depth with what it took to get there for those who might be curious or are thinking about taking the same leap.

Setting up for this was extremely expensive and while the horns did come out nice in the end, if I could go back in time and stop myself from starting it, I absolutely would. I went into resin casting with zero knowledge and learned almost everything from the dice making community, spent a LOT of time researching each component of the process, and adapted that to our own larger projects. However, many casting resources come from the US and are not available in Canada, and I did not find this out until later (I once asked for help getting started on Reddit, and was gently told not to bother ;; should've taken that advice tbh).

The pressure pot I chose to buy was from Harbor Freight, it is very commonly used and one of the cheaper options out there, I will not cover conversion here but there are a few videos on youtube. I regret this decision. There are other options that are more expensive but I believe they would be worth the price for a pot meant for casting! The Harbor Freight pot has been a complete nightmare from the day we got it, and as we are based in Canada and Harbor Freight is based in and only ships to the US, we paid close to double the price to get it here and even more to convert it. A ~$150 project quickly became $300+, and that was only the beginning. 

Our pot got totally beat up in the mail and we ended up having to replace a ton of extra parts right out of the box. Harbor Freight would not take it back, nor did they have any suggestions as to where I could find replacement parts (they did not sell them at the time, don't know if that's different now). The pressure gauge was busted and because of the massive dent, would not go past ~50 psi. Somehow the big solid metal screw got badly bent, we took it to 4 different places, no one could fix it and only the last one was even able to find us a similarly sized replacement. Sadly it does not have wings, and we must use a wrench to open and close our pot every single time (it is Very annoying haha!). These pots seem to be hit or miss, but after all the troubleshooting, it appears that a LOT of people have problems with it, and it isn't as easy or good as all the recommendations say it is.

Fixing the leaks became the next huge problem. We skipped thread sealing tape and went straight for an expensive thread sealant specifically because I didn't want to deal with the chance of leaks, but the actual pot lid just would not hold anything above 15psi, as the rubber gasket leaked from multiple areas. We could not find a replacement gasket and struggled with a lubricant and shuffling the lid around for a few weeks until we tried completely sealing the gasket to the lid with silicone glue, which finally fixed the issue and allowed us to cast things currently. At this point we have dumped about $400 on the pot alone. 

The air compressor was a bit of a challenge as well, as there wasn't a whole lot of information on it and neither of us had ever used or seen one before. From research, the most I really got was "anything will do," even when I asked in a personal thread on resin communities. This was not true. We went for cheaper options at first as we'd already spent so much on this project. None of the 2 air compressors we bought worked, and no one at any of those same stores were able to help us connect smaller air compressors to the pot. In the end we settled for a larger pancake compressor that cost a little under $200.

So in total, to give you an idea of what the setup for this cost, the inital two parts for these horns without the model, mold, resin, and other materials, cost roughly $600! Granted Canada gave us many problems (and many more to come haha!). Sunk-cost fallacy really got me on this one ): 

Next time I will go over the second half of the process, including the mold and actual horn casting! :3 Sorry this was so long and thank you for reading if you made it to the end! Usually feathers writes the patreon posts but I handled most of the casting stuff and dragged her into this hell (": see you next time! 

Files

Previews only

Comments

No comments found for this post.