Home Creators Posts Import Register Favorites Logout

Content

Thank you everyone for your patience while I finished up testing. Especially with pop-in features, I like to make sure everything fits correctly :)I have received hundreds of requests for a chicken, and wanted to take the opportunity to make improvements to the wings. Watching my wife hilariously trying to impersonate a chicken running around with little tucked wings was um, ... helpful!?!

For you AMS printers you will find a head with bigger pupils. I felt these eyes worked better for multicolor. Smaller pupil for single color.Happy Printing -Dan

*Please consider tagging @flexifactory/ #flexifactory in your social posts so I can see your amazing prints! AND make sure to share in the private Flexi Factory discord :)Print tips and Info: 

I test between 50% and 150% for functionality. BUT... I do not suggest smaller than 65% for this model. The links and footprint are tiny so detail will be lost and it could lead to failures. High quality materials and settings should be considered the smaller you go. The wings could be especially fragile.

STL and 3MF files are included. * If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.

I print with 3 walls, 15% infill/gyroid, .12 or .16 layer height for quality.

Make sure you have good adhesion. I always use a glue stick.

Gradient PLA works well with this model: I have a comprehensive list of Filament I use here: https://www.amazon.com/shop/flexifactory     *As an Amazon Associate I earn from qualifying purchases

1st photo is 90% and 70% 3MFs in Amolen Rock PLA Yellow Feldspar, Amolen Tigerwood, CC3D Marble and Bambulab Matte Lemon Yellow

2nd photo STLs are 150% , 110%, 100%, 70% in: Cookiecad Unicorn, Ziro Matte Tropical, Ziro Peach Sunrise

3rd and 4th photo STLs are 150% in: Cookiecad Unicorn, and 100% and 90% 3MFs in: Cookiecad Sunrise, Hatchbox Orange, Sunlu Black and Bambulab Matte Lemon Yellow

5th photo STLs are 115% and 100% in: iSANMATE Rainbow and Ziro Peachy Sunrise

Files

Comments

TIMOTHY L DURHAM

Well, Dan, there are a lot of creators out there nowadays that are doing a lot of similar stuff that you actually do when in my book are still number one on the market you always doing an outstanding job and you never have to worry about your print failing because they’re thoroughly tested by you And it is a great honor to be a patron on your site. Thanks, Dan.

Fiflak8483D

WOW !!! Where can I find the STL file?

Flexi Factory

scroll to the bottom. All files are in the post

Flexi Factory

Very kind words Timothy, and happy to hear my test printing and expertise is appreciated, truly! Your support let's me do what I love full-time.

TIMOTHY L DURHAM

It’s always a pleasure, Dan and it’s an honor to be a part of your group

Adam

You have to click on the post, files aren't shown on the patreon home feed

Nannette Blokzyl

My grandson is so excited for me to print him one

Giamarie Saponaro

Eeeeeeks!! He's absolutely adorable!! And I have a dozen printers available RIGHT NOW TOO!! Yay me!!!

Laine Gregory

This is going to be the very first model I print on my brand new A1 that just got delivered last night :)

Carla Schrum

OMG!!!!!!!!!!!! These are super Cute!!!!!!!

Kevin Gardner

I use the washable purple glue stick.

Jana Barroga

thanks I want to try it but want to make sure to get the right kind.

Nancy Lombard

Love it, and reminds us of foghorn leghorn's chicken hawk

Antonia Hernandez

We need a turkey now, if you not already have one

Tetsuo Kin

Would there be any chance we can have the file as a .zip to save having to click so many download files

Flexi Factory

I provide the individual files in the initial post, and then I zip them for the download folder for the month. So you can find the zipped files there. Collections tab at the top of the page under downloads.

Laine Gregory

I am very new to 3D printing and this was the very first print on my Bambu A1 but it took about 9.5hrs on the default setting and it looked like I could have made at least two more chickens from the waste filament. I watched a few youtube videos about reducing waste on the Bambu and learned to fill my plate so I squeezed 4 chickens in total onto the plate which was a lot better but still works out to 23 hrs of printing time and $8.50 worth of filament which is not cost effective at all. Can anyone give me some hints and tips on settings I can use for these chickens that will still produce a nice quality print but in less time and less filament?

Laine Gregory

PS - My son loves his chicken. We named her Penelope :)

Lean Basil

You've watched the videos and improved, that's all there is to it unfortunately. It is the drawback of the AMS concept. Otherwise you can spend a few more thousands for a prusa XL and learn a new machine.

Flexi Factory

with AMS unfortunately, there is considerable waste. I always print multiples because it is going to purge whether you have 1 or 4. Some folks use purge object to create another model, trick is to make it as tall as the object. We also have a section on the discord here. Go to settings and add through the app section. Several printers there with excellent ideas about minimizing materials and improving time.

Laine Gregory

Thank you for replying to me. I’m understanding now that I will not get it perfect. I was just hoping there were some other tweaks I might not know about yet to bring it down a little more in time/filament without compromising too much on the quality. I had been in groups and read so many messages about the Bambu before I bought one but had never seen anyone post about the increased production time or waste (just how great they are) so I wasn’t pre prepared for it and it caught me a little by surprise. Oh well, I still love it and I still love my expensive little chickens :)

Laine Gregory

I figured out purge to infill but I’m still not quite sure how to purge to object. I watched a YouTube video about it but they skipped over steps. I’ll have to find another one that explains it better (and look for a good model). Does it matter if the model is taller than the one you are printing or do you need to try to match the heights? Thank you so much for taking the time to respond to me. You must be so busy

Flexi Factory

If you share your settings on the discord, there are a few folks on there that print multicolor and have some great tips about reducing waste further

Ktm252

I would recommend baling your infill bigger, and if you use a prime tower, you can make that an object

Ktm252

whoop, making

Laine Gregory

I know I can use an object but I’m just not sure how to do that. I will figure it out. Just need some time to sit down and watch some videos on YouTube or something

Zelda

So cute

BrettDesigns3D

Select the model you want to use as a flush model, go to the per object settings next to the global settings, then go to other, then select all 3 flush options- Infill, Object & Support. You use this model to save on printer poop. you can do this by turning the flushing multiplier down from 1.0 to a lower value such as 0.6 and then the flushy model takes on what would be printer poop. Are you on the discord?

Laine Gregory

Thank you 🙏 I’m not on the discord yet. I don’t have that. Have to sign up

Laine Gregory

Can’t thank you enough. I think I got it figured out now :)

Baggy15

A highland cow would be epic. Just saying!

Christina

Just curious… would it be possible to get an egg, both one smaller than the chicken and a larger one I can put smaller prints in?

sanders341

does this come with an egg? This is cute.

Aaron Brenkus

Those are awesome! How do you get the gradients to match so well on the separate parts?

Aaron Brenkus

So, in this case you answered the age old question, the chicken came first :)

Flexi Factory

I usually print everything on the same bed, so it's in the color palette.

Kris Garner

Has anyone added a loop to these so they can hang as a Christmas ornament or keychain?

P Perry

These are awesome! Easily the best I’ve printed yet! Love this model and would love to more like them!