Home Creators Posts Import Register Favorites Logout

Content

Available Now for new members for $3.99. Exclusive Models discount code here: https://www.patreon.com/posts/116519946I know we are barely through Halloween and Holiday decorations are already in every store! There is a ton of info to share about this model, so please read through the post for a bunch of tips :)My wife has been begging me to make a Nutcracker for the past couple years, but I had to work on some fun new mechanisms for this one, to really make it special. I wanted to keep it Flexible, and also give it the ability to stand and make his arms posable. This holiday Exclusive will stick around through the end of December, because I have big plans for some additions!!!The way this prints, it gives the model a 360 look, but without the use of supports, like ALL of my designs. The Nutcracker Toy Soldier has plug in features, that can be printed in a multitude of colors to easily customize.  This also allows for printing many small ones at a time, or sizing up to make it huge. It comes with a crown and hat, plus 3 accessories to hold... the sword, candy cane and lollipop.  

He easily snaps together without glue. Just note that the hair has to slide into the head from the top before you put on the hat.Print tips and Info:

STL and 3MF files are included. * If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.

I print with 3 walls, 15% infill/gyroid, .12 or .16 layer height for quality. You might want to adjust the infill for the huge ones to make it lighter.

As usual. make sure you have good adhesion, especially for the mini versions. I always use a glue stick

I test printed between 40% and 200% for this design. Consider high quality materials and settings, the smaller you go.

The hat, crown and lollipop can be printed with a layer color change to give additional options without the use of AMS.

Files are zipped and must be extracted to use in the slicer

Gradient PLA works well with this model: I have a comprehensive list of Filament I use here: Amazon List

1st photo is 200% STL Hand Painted: Amolen Matte Sand Beige, stained and painted, then sprayed with Rustoleum Clear Enamel

Photos 2, 6, 7, 8 are STLs 40% - 125%: Colors include Cookiecad Mint Chip, Ziro Fast Change Rainbow Blaze, Amolen Yellow Feldspar rock and MORE

4th photo is 115% 3MF: Sunlu Red ,Black and White, eSun Beige, Amazon Gold

5th photo is 115% 3MF: Sunlu black and white, eSun beige. Ziro Rose and Cookiecad Mint Chip. It looks like candy!

Happy Printing -Dan*Please consider tagging @flexifactory/ #flexifactory in your social posts so I can see your amazing prints! AND make sure to share in the private Flexi Factory discord :) To join discord, go to your settings under Apps and connect.  Monthly Downloads and BONUS Files can be found here: DOWNLOADS   All of my Public Releases that are not included this month can be purchased on My Mini Factory or Cults 3d with the 40% off code. See this post for more information: DISCOUNTS  Past Exclusives can also be found in this tab. Individual discount codes to buy for $3.99.

Files

Comments

lolly

THIS IS AMAZING! 😍 Love it and can't wait to play with different color variations

Sharon

I love this. I can’t wait to print it. Thank you.

Rosanna Oglesby

This is so cool!! My daughter is a soldier in The Nutcracker this year. She’s going to love this!!

Karra Crane

im so excited! what is considered a high quality material? im assuming high quality setting are layer height speed etc?

Tina Brownfield

These are great!! I collect Nutcrackers.

Flexi Factory

My wife has an obscene amount. I think with this, a monster has been created.

Flexi Factory

Just your favorite pla that prints well and is not fragile (like some silks or mattes).

Karra Crane

Ok got it! I thought there was a magic super filament I didn’t know about yet 😂

Flexi Factory

Congratulations! My wife was in Ballet West Utah's version and was a party boy and buffoon.

MorenoCreatives3D

Is there anyway we can get a cupcake hat variant?! We want to print a 6ft one!

Aaron Brenkus

These look great, as always I love your designs! Is the print hangable like a decoration?

Debra Jarskey

Love it! I would like to know if you can hang it?

Flexi Factory

Not sure where a hole would go, let me think on it. You could add one in the slicer depending on which version you choose of hats it think.

Amy T Barber

Dan, Your work just gets more incredible as you go. The chess set was outstanding. This goes beyond that. Thank you for putting your effort into all this for us. its much appreciated. Amy

Jason

OMG this is AMAZING !

Aaron Brenkus

Was thinking like the awesome skeletons you made for Halloween, they work great to mount on my cubicle wall at work!

Jester

I'm thinking I can drill a small hole through the hat for it to hang as an ornament. if it works great, if not super glue a small ribbon on the back. It's very cool. My son is excited to print it HUGE.

Jason

I have some bad news, I just showed my wife this and she said she needs 10 different designs of this, LOL You have created a ton of new work to do! These would be great for people to try and collect them all.

Melanie St Onge

So cool! You did an amazing job with these!

Mark Chandler

Have You Tried To Make an Ornament Size or Even Keychain?

Jason C

Well my wife loves these! So guess I'm making some! 👍

Flexi Factory

I test printed through 40% so it will make an ornament size with no problem :) Working on a version with a hole!

Brandon Davids

These are great but ludicrously expensive even with cheap filament, due to the amount of waste. I don't really see a way around it either due to the ornate decorations on the hat, and legs etc... Great job. I just don't think these will sell for $40. I'm seeing about $25 cost to print these between filament and 30 cents an hour for the printer, and I charge cheap rates. Some people just triple filament charge, which is $12.50 ish with moderately priced filament at $25 per kg. God forbit a failure into the 29th or 30th hour, to waste all that filament and the opportunity cost.

Israel Amado

Thank you! They are amazing, specially for kids that want to paint them :)

Mast3rj3diyoda

I have printed 3 times and failed at 80% at the same spot on the torso. So far I have a set of legs, a hat, head and hair edited the model 1 last time to do nothing but the torso guess we will see in another 9 hours if it fail in the exact same spot for third time. unfortunately it will be the last attempt ADDED NOTE: Attempts have been on P1S and A1

Joseph Lewis

Got this bad boy going at 250% right now.

Mast3rj3diyoda

I have tried twice so far and failed in attempting when there was only 26mins left of 18 hr print. I don't sell anything but my mechanical design prints , these "toys" are strictly hobby and fun for family kids. the cost/risk is half the fun for me ( my opinion of course)

Brandon Davids

I have 6 bambus and a 5 head Prusa XL and over 600 spools of high quality filament. I like to sell prints to offset my 40k investment but theres probably kids selling prints using filament bought by their parents at ludicrous prices so margins are thin on sites like etsy. Best way to make money are proprietary designs in niche markets. I definitely don't do it for the money. My wife and I like making gifts for people. I'm printing a couple trays of 3 now and a tray of 6 heads. I shrunk down to 70 percent. I do like the risk of complex and long prints but it's hard to recover a $25 loss plus the opportunity cost of having sold those prints. 18 hours is short for us. We do many prints at 0.12 because I like to print for other people how I would do for myself. No highe than 0.16 and I hate variable because of the sheen difference of different layer heights. I love these so its worth seeing if people will buy a few. Ill see how they turn out in the morning.

Brandon Davids

Forgot to mention. The only reason I bought that many printers, and a I have a huge resin printer too, is to print RC airplanes. My son and I fly aand I like to print and build them. You have to print them slow so I scale wide to finish a plane in weeks, not months.

Brandon Davids

I want to see this! How many grams? What infill percentage? How big is your bed?

Brandon Davids

I'll let you know if mine turn out in the morning. I have one tray on the X1C and one on an A1.

Jeff N

Really is a great model! Thank you for sharing your creativeness!

Brandon Davids

Mine turned out great on the X1C. So far the A1 has 2 more hours and no issues. They snap together perfectly at 70 percent and I can fit 3 on the plate including all hats and utensils

Mast3rj3diyoda

Dude RC planes!!!! I have been doing researching that and have actually considering doing one

Mast3rj3diyoda

Challenge excepted lol ! 70% it is. I love Flexi Factory this was the only model so far that did me wrong but I think I figured it out on my end but now I'm going for 70%

Brandon Davids

LWPLA is its own learning curve but not hard, just need to understand what you are doing and read the darn tutorials.

Mast3rj3diyoda

I have 4 Bambu’s, two resin, 2 laser engravers and 2 Enders ( I use for prototyping) have considered starting to sell product but have pulled the trigger yet. Heck even went as far as buying a domain just hesitant since the market is flooded. Whole hardily agree that you have to find a niche and keep fingers crossed

3D Toy Store

We have P1S machines and have run 15 samples in multiple colors. No failures at at 60%. The only issue I have had is Bambu Slicer refuses to place text on certain areas at certain times and then at other times has no problem with it. Im getting ready to run samples at 80% and 100%. How is the print failing?

Mast3rj3diyoda

It was knocking the torso section off plate on its final level before finishing it before going to the handle/stem. Just for the sake of stress relief I added a plate and moved it. I was using Cyro grip plate changed to a textured PEI and used a glue stick added a brim at 10mm and it printed flawlessly it is beautiful so I currently have 6 more printing in different colors

3D Toy Store

Glad you got it figured out! I started using Nano Polymer Adhesive from Vision Miner... Not making money from this, the product has been awesome. It lasts a long time on your plate and holds very well. its a little pricy but for us its been worth the investment.

Jason

Dont feel bad I thought the same LOL

Mast3rj3diyoda

Hey thanks for the tip! I just ordered some, I am less patient waiting on supplies than I am waiting on prints I tend to want it now lol.

Mast3rj3diyoda

Who is going to make a 4' tall one? It is very tempting for me, I can't be the only one though right!?

Brandon Davids

Impossible to be on sites like Etsy "for the money". They also pretty much force you into free shipping above $35 which is about a $6 to $8 net loss between the label and box and tissue we use etc.... we have done markets and bring in about $4.50 a minute in revenue typically which is over 2k for ththe day but you have to print a ton of stuff ahead of time and then you will still have $2000 in merchandise left etc... my wife and I have good jobs so we don't want to give up prime weekend days in the summer every weekend either. One or two shows a summer. I could see retiring and making an extra few bucks a month making people smile with nice gifts. We give tons of print2d stuff to colleagues and friends and they go nuts for the stuff.

WonderGaming

Can you please tell me how to get comertial (physical) rights to your past models? I see tens if not hundreds of sellers on Etsy selling your t-Rex. I have bought your models on mini factory. Please let me know.

WonderGaming

Let me know if the one I bought on mini factory is commercial.

Kristy Taylor

I printed these for my craft show on Saturday and sold out

Mast3rj3diyoda

Who reads tutorials any more 🤣. Joking of course, between YouTube, books I’ve bought, and of course TikTok videos I am burnt out on tutorials but so willing to learn more to make RC planes!

Christopher Hakkenberg

I believe if you hold and active commercial license subscription here any Flexi Factory designs you purchase on myminifactory would be covered by that license.

Flexi Factory

Good morning. As stated below, that is correct. As an active subscriber, once you have filled out the seller authorization form and reviewed the guidelines, you were able to sell printed models of any of my designs. Please go to the collections tab at the top of the page under seller info and it will detail my expectations:-)

Flexi Factory

That's why I mentioned the bit about the hair going on before the Hat haha

Flexi Factory

And Orca slicer is a win for placing the text:)

Flexi Factory

It is one of the reasons I made them in pieces, so they don't have to be in multicolor. I believe the cost would be much more effective on those.

Laine Gregory

I’m having trouble completing the forms because I’m confused about which email address is connected. On my phone in the app I’m signed in with my Apple ID with some kind of relay email address. On the computer it appears to be my husbands email address that comes up automatically when I click on the form link. It says “switch user” but I can only sign in with another Gmail account and not my Apple ID and it says the email addresses must match. I’m not sure which one I’m supposed to put down. I can’t remember if I originally signed up on my phone or pc as I’ve been accessing Patreon from both and both are signed in on the same account

J K

Drop the raptor my dude! LETS GOOOO!!!! WOOHOOOO!

Kim McKenzie Knittig

I read that and figured it out, lol. Guess I should read before printing but was too excited for this one! 😆

Alyssa

Can anyone say how tall a 100% model is when assembled? Thanks

Joseph Lewis

Still a work in progress! will post when done!

Greyson Postell

Me! I am making one as big as my X1C can make it!

DeAnn

I made one at 50%. It's awesome. The only problem I had is the lever isn't working to move the mouth, and the connection for hair into head is very tight.

DeAnn

I collect them too! I have 60. I'll be adding several of this model to my collection, for sure!!!!

DeAnn

I made one at 50%. It's awesome. The only problem I had is the lever isn't working to move the mouth, and the connection for hair into head is very tight.

DeAnn

did you print at 100%? may I ask what you charged for each one? I have requests from several friends but don't know what to charge

Flexi Factory

Well that is strange about the lever. I wonder if there was a printing defect. All my littles functioned down to 40%.

Melinda Livie

I’ve printed lots now on both my x1c & a1 with zero problems

Mast3rj3diyoda

since this posting I have printed 26 with no more issues since making some adjustments on my slicer

Michael Gleason

I had an issue on the A1 but not the p1s or x1c

bigibomb

as long as you subscribe to patreon or tribes an follow certain rules you can sell commercially

Jenn

I fixed the issue with the 50% models and their hair not fitting by decreasing the layer size as recommended instead of using our usual settings.

Gudi Fischer

Is there a multicolor file? I can't find it, sorry

3D Studio

the 2mf_all is the multicolor

Flexi Factory

Yes, it is above in the post, or the zip file in the downloads. 3mf

Christine Whelan

New here and so excited! Is everyone splitting the model by item and printing separately to help with the waste and just filling the plates or one plate (print by layer or print by object)

Flexi Factory

You may get a better response on the private discord. There is a seller section there for tips :) Settings tab, under apps when you are logged in here :)

Greyson Postell

For the 100%, I am printing them as they were already on the plate for bambulab. For the 255%, I am printing every part separately to make them big.

Aaron Brenkus

I made one and it came out excellent, I am making an aemy of these things! How can I share a picture of it?

Shayla Anthony

I pulled 6 printers for this model this past week. Printing like for like on each bed at 100%.

RACHELLE

Is there a chance you might also modify for a female nutcracker? Perhaps an ascot and no mustache?

Flexi Factory

Discord photo section, email me at flexifactory@gmail.com or #flexifactory on any social media.

Flexi Factory

Definitely considering. I collect interest and go from there :)

The Reptile Gumbo Podcast

Can you print these parts all standing up to try and save on color changes or will it not work because they are articulated?

Amy T Barber

Oh yeah sorry just getting back. You probably know this by now, tired of waiting on me. My mini factory. Dan has links. But I think you can still scroll down and look. Can you imagine the time it takes. I work in oils on canvas and it's wet on wet paint very fast. So I can't imagine anything taking so long with all those layers. I'm in awe.

Amy T Barber

Standing again, I find myself apologizing for taking so long getting back to people. They all stand perfectly, you can change sizes a bit. You can ask Dan any other questions, he will know better. Amy

Heather Atkinson

My mom loved nutcrackers, she is the reason I started printing. She passed before I could print her anything. This one got me in the feels.

Troy Bos

Are folks printing all pieces of the Nutcracker on the plate at one time? Or is it better to print them in parts?