Home Creators Posts Import Register Favorites Logout

Content

Yep the visor opens and closes. I've actually been noodling how the visor was going to work for a while now, and I can't be happier with how it functions.

To open and close it you can either flip it with your finger, or just rotate the head like the eyes on one of those creepy old dolls.😁

There are a few more details I'm still planning on adding, so I'm keeping this guy in Beta for now.

Also, It is possible to get him to stand, but it's really tough.

Thanks again, and happy printing.

Files

Comments

renedunn21

how do i get this one

Flexi Factory

The Astronaut is available with the 40% off discount. Link can be found in the Collections tab at the top of the page :) It was a much older public releases a couple years back.

Crystal Lake Outdoors

Goi g to start in few min woohoo. I knew I worked hard today so I could get home early

Brian Fox

Nice! This will be started this evening for sure!

Brian Fox

What about a stand of sorts for display standing up?

Ashley Richardi

Omg I was just going to close down my printers for the holiday weekend. Guess one more print couldn’t hurt. I have a multi colored glow that is calling my name

Soniadayz

What an AWESOME print. Can’t wait to try it out.. LOVE Your models 🙌🙌🤌

Allen Smith

That is sweet! Love it, I'll be trying it this weekend for sure.

Nigel

Gone and done it again! You just keep on smashing out these awesome prints! By far my favourite Patreon

Nigel

Gonna try this in rainbow glow in the dark

Spudster

On the print bed @ 100%. Should have results in about 12 hours!

Spudster

This would be perfect for some diorama add-ons.

Sabrina

That sounds really cool

Filament Stories

I am so very excited to print him. He is absolutely beautiful. He just makes you smile when you see him.

Jeff

straight into July with a Bang this one is awesome Dan

Jim Saltzgiver

One more print before I leave for my Cruise this weekend.

Ashley Richardi

Printed at 90% with rainbow glow filament and this print is amazing. Love your work!!

Allen Smith

I did 75% but I think I need to dial in my printer a little better, I can't get the visor to move. My wife says, too bad it isn't stuck down. lol

@d3d_creative

Love it but going to wait for final model. "I tell you, I could fly around this room with my eyes closed!"

Garron

Perfect print at 100% in prusa silver

Spudster

Printed at 100% and at 66%. Helmet visor was a little stuck at 66% but was able to get it loose. Not sure how much smaller you could go and be successful.

Árni Ólafsson

Visor stuck at 100% 0.16. Looks good though and I think I can loosen up the visor.

Gigamajig

Made 3 prints 100% Matterhackers Blue Raspberry, Mika3D Copper, and a Marble filament made by Inland. all 3 have Visor issues. Trying warm water to see if I can loosen them up.

Allen Smith

Printed at 100% and the visor works, but I have some flow issues/coverage at top layers to dial in. I have some underextrusion going on now i think. lol Great design, thank you.

Eli Weisman

Worked well at 100%, .20, 10% infill, 3mm walls. Visor works perfectly. Head is heavy for sure.

Flexi Factory

I'm really surprised that the visor stuck at 100% I'm curious, can you tell if the visor broke from the print bed before the print was done? My best guess for that would be an adhesion issue.

Flexi Factory

Is the visor popping off of the print bed before it's done? Perhaps an adhesion issue?

Gigamajig

No I meant the visor won’t come down on all 3. Prints are beautiful, what walls setting do you recommend? I didn’t make any adjustments to them when I saved the file.

Árni Ólafsson

No adhesion issue. For me I think possibly an overhang issue, as the outside of helmet (lower/overhang part) looks a little ugly. Maybe the same is happenig on the inside and causing the trouble since it is not fully smooth.

Árni Ólafsson

I got it working though. Still a little stiff.

Kevin

I am printing it now with the dreaded GST3D filament.

Usman Naeem

printing this now. 100%, prusament galaxy black PLA on sidewinder X1.

Arrons3D

Printed 100%, 0.2mm, 10% infill. 3DFillies Bronze Metal PLA. Printed beautifully.

Skyline3D

Gonna print this tomorrow on my ender 3S1 in Sunlu PLA

Vickie Hatch

hoe long did he roughly take?

👻 Danelle 🪬

Printing this now at 100% - 15% infill - says 15 hrs. Can't wait!

Jmtkreations

mine printed multiple times no visor issues did 100% and 80%

Brandon Hall

Scaled to 75% and everything works fine. Thanks.

Brandon Hall

Give a little pull from the front of the visor. It’ll pull down.

Gigamajig

It was my fault I figured it out, it printed with a brim and had a thin layer on the back of the helmet preventing the visor from moving. Needless to say I removed the brim from my file. All good now!

Gigamajig

There was a thin layer on the back that was stopping it.

Charles Rowell

Works great, prints without any issue

Arrons3D

Just over 10 hrs from memory, I sliced it with a variable layer height ready for final version, should be 16 hrs.

marco camatarri

well....after the astronaut....we need HEDGEHOG😜💙🌀🌈

Usman Naeem

No problems at 100%. Works just as described. Would be great if he could stand. Can the articulation be squary and flatter in order to make him stand?

Solcutter

First print failed at 15% pla silk - visor came unstuck now printing in stickier pla & will paint it :)

Corey Serrins

Face shield doesn't move when printed with resin. Would be cool to have this model complete for resin instead of flat on the back!

Chris Smith

This one is amazing. The face shield works way better than I thought possible. Thank you!

Flexi Factory

I haven't made the leap yet to learn how these things print in resin.

Kathy Felker

Printed it 100% size. It's perfect! Visor moves easily. He sits great with visor open or closed. Printed on 3V2 with Direct Drive upgrade with Polymaker PLA Matt, 0.2 layer height. One request... the visor could have the bottom edge stick out a bit to make it easier to move open or close when he is posed.

William Goss

Pretty cool but hes way to top heavy and the way his leg joints are make it very hard to have him sit as its pointed and is lower then the point where his legs and the center of his pelvis meet if he was sitting down... Super cool tho!

Jeremy Hodder

I printed one at 100% and the joints and helmet work beautifully. Good work on designing this model.

Balazs Koos

According to them, I'm the only one whose visor doesn't work. :-( I will try again, at a lower temperature (Anycubic 4Max Pro 2.0, PLA 205°C)

Benjamin Edwards

Printed two of them and they are beautiful. Well done

Natalie Summers

That would be cool for a Halloween "bonus" release - especially if he could easily combine the skull he already has.

Megan S.

Ooooh Vashta Nerada style! I would LOVE that!!

Melissa Hardy

Printed one at 100% and it came out amazing! This guy is awesome!

Dominik Brüske

I have printed one too. In White PLA+ at 100%. My Kids love him... It came out really amazing.

Julian

Can we please get a stand so he can standup please :-)

Corey Serrins

Happy to help test things if you want. I think especially with this piece complete 3d would be a lot cooler, especially if you modify the waist/torso so it could stand upright.

Janean Hallstrom

Printed 2 so far and both came out excellent!

Daniel Webber

can you make it so a replacement head can be printed

Kamil Ludwicki

could you add ring on the head? I would like to make keyring with it :)

Andrew Curnutte

Printed at 100% with nasty wet PLA and it honestly came out amazing and works flawlessly! Great work!

Just Moonshot

Printed him in the Copper colored PLA+ came out 100% PERFECT! Helmet works no problem just love it!

David Smith

Skull is great idea but how about the visor being part broken and when lifted you see the skull ?

David Smith

can i ask what infill people are using - and is it sad i want a stupid sized version ?

troy hebert

I did one at 155% and 15% infill 1.6 shell 4 walls , came out perfect

Rick Norris

This is awesome, printed great.

Just Because

He needs a back pack like real astronauts have, with pieces that hold is legs in place. Does two things, let’s him stand if someone wants him to, and finishes off the back!

Pauline S Lenz

Tips on getting the visor to open, mine is fused together?

Megan S.

Mine doesn’t

Paul Carne

not sad at all, Once I've printed the normal sized one to check its all good on my printer, im going to max out my printers size with one :-D

Pauline S Lenz

Hopefully someone can help us with this issue?

Flexi Factory

There's a lot of variables. If you want to provide any details or photos, make sure you join the discord. There's a troubleshooting area and a much larger audience can chime in.

Sarah Small

Can there be a stand ? like the doll stands but instead of around the waist it goes around the neck and holds him up? Please and thank you.

Flexi Factory

I have some ideas for add-ons and stand options. You'll definitely see some fun things for this guy!

Lorina Longnecker

My adult family members loved playing with this guy last night. They called his standing pose...peacocking stance

Flexi Factory

did you ever get it to work? things to look out for are having good adhesion for the back of the helmet/visor. if it breaks free during printing you might not notice and might mess up. when in doubt, I use elmers disappearing purple glue stick. I never use brims. also if you get a lot of stringing it might also freeze it up

Flexi Factory

15% infill, and I'm thinking about a stupid sized version. 😁