Home Creators Posts Import Register Favorites Logout

Content

A lot of little changes since the Beta.

*I added some extra detail. helmet arms legs etc...

*He sits better.  It really bugged me that when you set him at the end of a table he just wanted to slide off. I didn't totally eliminate this tendency, but it's a bit better. 

*I also feel it's easier to get him to stand. (Although it's possible that I just got better at it 😁) 

Thanks Again-Dan

Files

Comments

Ben Holmes

Where can i download the dead astronaut stl?

Tim Neal

Are other patrons allowed to share the skeleton version with those of us that missed it.

Flexi Factory

No. Absolutely not. This was an exclusive limited release. But, I intend to rework the design for the charity. So hope is not lost, the skeleton will make an appearance again.

John Gemlo

Will you be adding the Astronaut to your My Minifactory store?

Jay Edwards

Hi I joined in July last year ,, Am I still able to get the STL for the skeleton astronaut

Flexi Factory

Yep. All the files for the month get sent to My Mini Factory. So just check your email from that month and click the link. Then go to MMF and connect your account. It shows up in the "Downloads shared with me" folder.

Gage

How can I get this file for the astronaut skeleton, he is my 🤩 and is what inspired me to start printing.

Gage

go to cults 3d

Flexi Factory

Oh yes. The code works on cults too. That link is in the post :)

Donnie

I love the face that you give your designs. However my fiancé was able to get it to stand on the very first try

Wayne Yano

Any possibility of a skull face variant? Like Dr Who?

Noel Brooks

I love this. I just started this print. I can’t wait.

3D Zone

I’m pretty sure the only way I will ever get this guy to stand up is by using super glue… I get so frustrated I end up giving up..

Sander Janssen Van de Laak

I had him standing but collapsed in the middle of the night and scared the crap out of me

Allen Smith

Awesome work Dan - appreciate all your efforts to make these as nice as possible!

Slava

Amazing. Is it good to print from flexible filament?

Árni Ólafsson

Love it! I am new to this and wondering if there is a place that you guy’s share pics of your “makes”? Would be fun to see all the different variations.

Jimmy Futrelle

Very nice. I did have trouble getting his helmet to break loose and close. I'm thinking that is only me though.

Flexi Factory

My nieces and nephews made it a timed game. It was pretty funny

Flexi Factory

I have not tried. Great question to ask on discord. Lots of people with different types of printers :)

Flexi Factory

Yes!!! Join the discord. Only for Flexi Factory Patrons. Info was sent in the welcome email. But you can also login to patreon, go to the main page and connect.

Flexi Factory

A few others had issues. I believe it an issue with adhesion on the back of the head. It starts messing up the print inside the helmet and you can't see it.

J Maxx

Thank you for working so hard Dan, he's just awesome👨🏽‍🚀🤩

JD23mil

Too much first layer smoosh, I think, may affect helmet operational flow. Don't quote me though!

Flexi Factory

I left a pretty big gap on the first few layers to minimize this, but yes it could happen especially if printed small.

Sommer Slagle

I have printed 4 now and all the helmets won't come down. It is almost like they are stuck. Any advice on this would help.

Michael Pritchard

Definitely a setting issue. What are you printing with? What are you slicing with? I printed three before I got it to work correctly.

Michael Pritchard

Try changing your wall thickness to 0.8mm, Print with no supports and no build plate adhesion, make sure to break loose the pivot points for the helmet. I used a small flat head screwdriver

Sommer Slagle

Can you tell me where the pivot points are, please

Michael Pritchard

Where the helmet and face shield meet (His Ears) use a small flat screwdriver. Just enough to break loose any nettlesome burs you may have.

J-3DP LLC

How about a little alien friend for him? Or a mini robot?

Megan S.

I had trouble too and I'm not sure what to change in my settings to fix it

Megan S.

Yay! the Nashta Verada is my all time favorite villain!

JD23mil

Try multiple filaments and low bed temps.

Flexi Factory

Are you possibly losing adhesion on the back of the helmet? Also if you had supports on it would probably lock up so make sure you don't have supports. I could also see if you had a lot of stringing in my lock up. But you'd be able to free it.

Sommer Slagle

No supports being used at all, no I don't think it's adhesive. But I am going to print another tomorrow and try what everyone has suggested.

Mazen Murshed

Any body can help me with the Prusa Slicer settings , the visor still not opening or closing . Thank You

Tuff Ol Hound Studios

Make sure you do not have it set to fill gaps. My first one would not open on its own. The second one works fine.

Flexi Factory

I have noticed that many people print with supports. They are not needed on my models and could definitely cause issues.

JD23mil

I have "fill gaps" always set. I have printed 6 and only had 2 that will not open. One, because, I believe, 1st layer smoosh and terrible filament. The second, high temps while printing helmet.

Wayne Parker

i have printed at least 20+ of these and sold them Haven't had any issues with them opening and closing! P.S. Waiting on the Scarecrow :)

JD23mil

Anyone else show up here daily lookin for a "fix"? Lol

JD23mil

Be honest.

Rich Newman

Hi everyone. Is there any chance we could get a .stl for just the head/helmet to trial print until we can get the visor opening and closing? It would save a lot of time and effort if I didn't have to print the body every time. Perhaps turn the head into a keyring as well? could be a Patreon bonus but it would definitely help

Stephen Mesker

You can cut it in your slicer, 3d Builder, or Tinkercad. Probably just a straight cut, but it would work. You might be able to separate into parts in PrusaSlicer and delete all but the head pieces?

Flexi Factory

Thank you for the suggestion. I know there has been a lot of discussion about the visor...I have printed a couple dozen with zero visor issues. My biggest suggestion is no supports. Time is not on my side at the moment, as I am trying to get the next model out asap :) I need a couple more Dan's that can respond to requests and marketing while I make art, hahaha.

Mishelle Bookout

FYI, I imported the STL into Blender, put the object into Edit Mode, right click, then Separate -> By Loose Parts. That separated all the parts so I could just deal with the head.

Spudster

It's easy to do yourself. Load it into 3D Builder (free program available for Windows). Insert a Cube, then expand it and move it until it covers all of the body you want to eliminate. Click on the Edit tab and click Subtract. Wait until it is done deleting the cube and everything that it was covering. Save As a new stl file.

Flexi Factory

I really hesitate to encourage doing it yourself :) But others have suggested it and they are correct. Just please don't go selling any modifications. That is where things get tricky.

TIMOTHY L DURHAM

Have been making your new Flexi Astronaut on my HALOT Sky and it’s turned out great even the front visor works remarkable and have several colors from Red to White to blue and even translucent colors all came out great would like to thank you for some amazing Flexi models

Marissa

Any chance we could get a female astronaut added to the list?? Would only need a face change and everything else the same and same size as the male. Thanks for considering it!

David

Seems I can only download the Beta

Flexi Factory

I replace all the files with the updated version. So you should have that one. Also in the August download folder.

troy hebert

is the completed atstro stl avalible ??

Flexi Factory

The astronaut is in the August download post here on patreon.

Laura

Is there an astronaut with a female face?

Flexi Factory

Not yet, but there will be. Not just changing the face, she will be slightly different.

Yul Ka

I tried this 3 times and it doesnt work. Only couple of joints move...what am i doing wrong :(

James Kirby

You dont have supports enabled do you?

Yul Ka

Should it be enabled? I usually dont chabge anything in file and it works awesome

Sinista Troopah

where can i find the skeleton version of this i just joined and really want to print that one

Flexi Factory

The skeleton was a September Exclusive for September Patrons. It is no longer available. We vote on a new exclusive each month.

Nastassia Zamora

noooo I missed out this was my husbands favorite and I was waiting to get my printer, the regrets!!!!

Paige's Purlieu

I'm really sad that I missed out on the skeleton astronaut too!! I really wanted this guy!!

PatrickW3D

So I can print the skeleton version just fine, but with the exact same settings, the regular astronaut wont let the visor move. I'm guessing it's a stringing problem most likely. Has anyone else had that issue?

Flexi Factory

Did you get the looser tolerance version? If you go back to your MMF link, it is there, updated.

Kathy tran

where can iget this file?