Home Creators Posts Import Register Favorites Logout

Downloads

Content

CTR requirements:

Stable DRAM.

Disabled Curve Optimizer (in BIOS).

CPU LLC (Load Line Calibration) - Auto or your desire. 

CPU Voltage - Auto (in BIOS).

Windows 10 build 2004 or newer.

_______How to make a diagnosis & profile creation (VIDEO)How to activate profiles + quick performance test for PX and P1 profiles  (VIDEO)_______

The program is in a 7-ZIP archive.  Download the archiver.NET Framework to 4.8. Download  _______

What's new? (ver. 13)This update requires new diagnostics (for Zen 3 owners)!

Frequency fluctuations during dynamic profile operation are significantly reduced (updated rules for dynamic profiles).  

Improved prevention of frequency peaks in light load (overboost, which leads to crashing). User intervention in the OB settings for PX HIGH is welcome to achieve better performance or stability. If you encounter instability you can decrease the OB for PX HIGH (rarely for PX MID) by 18, try increasing the voltage for PX HIGH (1375 -> 1400, for example) or increase the CPU LLC level. 

The profile holding settings have been changed. Profiles should not react to Windows thread manager stuttering.

Adjusting CO (Curve Optimizer) calculation for Ryzen 9 5950X.

Added basic support for AIDA64. Since this application does not use CPPC I cannot guarantee its stability.

Changed presentation of CO (Curve Optimizer) information (each value has either a minus sign or none).

Auto update does not want to work (fixed).

The debug information will only be available if the "NOTIFICATION" option is enabled. It is recommended to use only to find compatibility problems in the system.

Improved performance in some games and applications.

Other minor fixes and stability improvements.

What's new? (ver. 8)

Prime95 30.6 build 4. Fixing Prime95 errors.

Updated more accurate OB diagnostics, you don't have to adjust anything. The OB values will be set for each profile + saved automatically.

During the OB diagnostics information about CO (Curve Optimizer) coefficients is presented to the user. If for some reason you can not use CTR HYBRID OC - you have an alternative. Simply enter these CO coefficients in the BIOS. I know that there are some scripts that help find the CO. My solution is simpler, faster and more accurate. Why? I get an answer from SMU, i.e. the processor tells me which base curve it has and what it likes and what it doesn't like. For testing I also use AVX multi-core load. This allows me to get optimal results not only for each core individually, but also the result of interaction of all cores simultaneously. There are no alternatives to this function.

Automatic update for CTR. Every time, when you start CTR, a secure TSL connection will be made to the github server where updates are stored. If an update is found, you will be notified. The process is fully automatic. After confirmation, the files are updated and the CTR is started. About the github server. It is protected from hacker attacks and also has anti-virus software. Your system will always be safe.

Load type detection system. This system allows real-time dynamic profiles to change their settings for maximum stability and performance. Now you can find out which application uses FMA3 and which uses AVX1 (for example).

The response speed of dynamic profiles has doubled. That is, the frequency change speed is 8ms instead of the usual 16ms. This allows you to increase or decrease the frequency faster in relation to load and conditions.

Windows notification. If the CTR is minimized or minimized to the tray you will not miss important messages. In the bottom right corner you will receive different kinds of notifications. In most cases this information is not critical, but it is worth writing to Discord about it. At the moment there are compatibility problems with the following programs: AIDA 64 (blocks global PCI mutex), Aquaero(does not allow for the use of global PCI mutex), Corsair iCUE (does not allow for the use of global PCI mutex) and AMD Ryzen Master (does not use a secure connection to the SMU).

EXTRA BOOST - superstructure for OB, which allows dynamic profiles to run at higher frequencies in SSE - AVX1 loads. On average this is an extra 25-50 MHz without increasing the voltages.

Full adaptation to CPU LLC (Load Line Calibration) Auto. Sometimes LLC Auto allows you to get more performance.

_______

Thank you for your support!_______

Special thanks to @Riwwelorsch, @Ann Martiné, @ACE, @arcanazen, @DayDreamer, @Gadfly, @rizlah , @&&Devin, @Bloax , @RdWing and @wanderinarcheologist  for help with development and testing RC6.

Files

Comments

timeDrapery

Great stuff, Yuri Thank you!

Russ Fowler

Brilliant work - all credit to you and everybody involved. Looking forward to using it when my PC finally arrives from the builders

S. D. Gwynn

Looking forward to hearing from the community about this one!

Rory O'Donnell

...pleased to confirm....rock solid...no crashes...Mr Doom Guy appreciates it

Gabriel

What does this "AIDA 64 (blocks global PCI mutex)" actually do? I use AIDA for monitoring displaying to an old Galaxy Tab. How is that issue going to affect my system?

Yuri Bubliy

Periodically blocks the PCI bus. Theoretically, this could affect the stability of CTR. Practically, the effect is very weak.

Gabriel

thank you!

Ismet Togay

Even in light browser usage, I am having many SMU_BUSY_1 errors (in notifications and UI): 12:03:54 AM: SMU_BUSY_1 100.5 12:20:51 AM: SMU_BUSY_1 101.4 1:03:35 AM: SMU_BUSY_1 99.6 1:07:40 AM: SMU_BUSY_1 99.7 1:22:23 AM: SMU_BUSY_1 99.6 1:36:05 AM: SMU_BUSY_1 99.2

Net30

I'm having crashes and it keeps saying pci mutex error. I'll get like 50 in a row. Tried closing icue, and many other apps. At this point just isn't worth having unstable system. Didn't have this problem before the last update.

Gabriel

I'm playing with it but so far it looks like for my system rc5 v15 is still the best fit

Yuri Bubliy

Who told you that these are errors? These are not errors. This is information for testers.

Yuri Bubliy

This is a product for enthusiasts. Absolutely everything cannot be made automatic. I wrote in this release that user intervention is required. This has always been necessary and with RC5 you are just lucky.

Ismet Togay

Also, I am getting "SMU was not able to run command" info.

Morgan Ring

No crashes and games have been running smoothly but this one and the previous version have been giving me worse scores on CB20 when 'tuned' than before it was tuned. Not a big issue for me, just letting you know.

Greg McMaster

I 2nd Gabriel's note that RC5 v15 is the last stable version - and users will start removing their patreon funding if this product keeps adding "features" that a large part of the userbase cannot use as stability is worse every version...

Greg McMaster

Please tell me what i need to do... follow ALL the steps, including deciphering the conflicting information between the big guide/manual/release notes. ram stability confirmed, numerous hours spent in discord, being told my CPU shouldn't have been sold to me (not helpful) - change bios - all the excuses under the sun that its not CTR at fault... EXCEPT when i ask why RC5 ver 15 works PERFECTLY... radio silence. When trying to track down root cause, and the only variable is the software version... its the software. Then to be told "the next version will fix that problem" and see instead more features and LESS stability... clearly there is no apetite to fix the edge cases. If this is the case stop stringing along paying users, I took you at your word you were actually trying to fix things, but it feels like you just wanted the subscription to continue?

Greg McMaster

And i know you "keep getting emails from less experienced users complaining of x" - you have produced a product that is being marketed as able to achieve what experienced users can achieve manually, but via an automatic process - aka a "press this button and it will work it out". To then act surprised that this product is popular with inexperienced users, who are the type of user base that just wants a product that works without needing to learn the underlying mechanics... all "tweak this and that" begins after diagnostic completess. but in a lot of cases pressing that button just causes crash after crash until CTR stops bothering to start up with windows... what does a user do if the software fails at step 1?

Yuri Bubliy

The program does not have to be human and it does not have to guess what the human thinks. The program requires mandatory user intervention in the tuning process. This is mentioned in the note. You did not meet the main condition - to tune the PX profile yourself. You have not tried the manual LLC. You have not done that. The only thing you did was write a post about being frustrated. I have dedicated 3 posts on how to do this. The description takes only a few lines. If you don't want to do it, use CO. The CO result is available after diagnosis. I might also suggest that you use the OB values from the previous version that you like. I don't plan to do a significant downgrade for the rest of the users because you didn't try to change the OB manually. Question for you. Does the Curve Optimizer automatically configure itself? It doesn't require the user's presence or actions? There is no software that can do fine-tuning automatically. I offer users a tool that can help them achieve great results. This tool reduces the time it takes to select and test values. This tool shows where the processor has the optimal range. It's a guide, but it's not a hired worker who is 100% obligated to do what you think. Without CTR, there are also problems in the world. If you have a problem and need help - point my nickname in discord and we'll discuss it. I don't refuse to help anyone.

Greg McMaster

I have tried manual LLC, would you like me to post the pages and pages of discord discussion between you and I? My frustration is you assume the user is at fault 100% of the time, i am happy to prove that in this case the software version determines the outcome, but clearly you won't listen?

Greg McMaster

My 1 question is - according to your instructions you press the diagnostic button, and "the pc may reset multiple times but this is fine" when in fact it gives up, and actually doesn't complete the diagnosis.

Yuri Bubliy

To get better results, you will need to manually increase the voltage (and then perform profile creation) or just increase the OB. For some systems the OB reserve is huge. The OB increase step is 10. I made this build with a lowered OB because there are a huge number of users who do not understand how to configure the OB.

Greg McMaster

Why not build a product that is robust enough to cover the widest range of silicon lottery? You sent me test versions at one point while trying to understand what was different, and at the time the theory was OB was starting to agressively, then you said the next version would include support for this issue.... annnnnd no mention of it since then. just false promises

Greg McMaster

Further to your LLC comment, what makes you assume i didn't try it? Not only have I tried multiple LLC settings, achieving the 1.5-3.5 sweet spot (less than 1.5 for PX load, but your latest set of instructions for LLC is "Full adaptation to CPU LLC (Load Line Calibration) Auto. More stability and more performance if you use CPU LLC Auto. This is my new recommendation for RC6." And then you BLAME the user for not changing it (even though of course i tried it)

Yuri Bubliy

CTR always saves only the successful steps. If there was a restart of the system CTR will save only the previous successful step. This is the principle of any algorithm that does a blind search for results. The result that contains the problem or errors will never be saved. If there is a reboot during the diagnostics - the testing process is complete. After rebooting the system, CTR will automatically recover within two minutes and complete all required operations. At this step, all that was required of the CTR is complete. Further actions are performed by the user. If there is instability in 1T load - decrease OB for PX. If there is a problem with stability of all cores - lower OB for P1. Everything is simple, but it requires attention and user action. I don't have a Patreon correspondence with you. Is it on Discord?

Ismet Togay

I am using ASUS ROG Crosshair VIII Dark Hero Bios ver. 3501 and 5950x.

Greg McMaster

Yes discord (DaManGSM) - My issue is that the PC will hard crash at the VERY beginning of any OB test, whether that be part of diagnostics or by pressing calculate OB in the profiles section. When part of diagnostics phoenix is enabled so it will restart and restart and restart - eventually just never starting CTR again on the 4th or 5th reboot. It does NOT complete the OB testing ever. If running through the profiles screen it crashes immediately again, but as phoenix isnt enabled it doesn't try again on reboot. I am not crashing AFTER the OB settings are found/applied, i crash at the start. All of this is true since RC5 v15, and thats my point, what once worked now does not, and no matter of bios changes makes any version after RC5 v15 any better. and I always see people mention "nice build but RC5 v15 is still the most stable" even with the latest release, there is a comment there from another user...

Yuri Bubliy

In version 15 you have no problem with the OB test, right? The OB test has no phoenix, but it has the ability to record profiles if the step was successful, i.e. it does not need the phoenix. If the problem occurred in the first step, CTR will not write anything to the profiles.

Greg McMaster

Yes correct, RC5 V15 will complete the OB test either as part of the diagnostic, or by disabling - completing diagnostic, and then running OB test standalone.

84wayz

I'm curious, what system specs are you running? I actually had a problem with every CTR after RC5 V15. That was also my most stable. RC6 V8 is the only one besides RC5 V15 that has been able to run smoothly on my pc. Has the RC6 versions been a problem on yours ? I am running a 5900X on an X570 Aorus Master.

Alberto Braghieri

Did you try a cmos reset just to be sure to start with default settings? Try that and then follow the guide to properly set the BIOS, at first do not OC your memory....it helped me a lot.

Gabriel

So you are assuming I am not an "enthusiast" just because RC5 is giving me better results???? You are assuming I don't do manual intervention? Mate, I have been using computers since a C64 and Tandy Coco and manually overclocking all my life so it would be nice if you didn't assume people having issues or getting better performance from previous versions are just stupid or waiting for a one button does it all fix. Your attitude lately as I see on many questions with people having legit questions is on the rude side so you need to take a break before you start pushing supporters away,

Gabriel

Greg, indeed and his attitude lately deleting comments and blaming as user error for people with legit concerns and his assumptions that we are just dumb is NOT going to help keep supporters around either. And since actions speak louder than words, I just made a decision to stop so this is my last month here. Good luck, Greg.

Greg McMaster

Yes have tried CMOS reset and many many bios setting changes, have tried different bios versions, and my board has dual bios, even tried the backup bios. i believe the root cause is my 5950x 2nd CCD is VERY poor at OB, and the later versions of CTR have been more agressive on the starting point for OB detection (in CTR RC5 V15 it ends up giving CCD2 a NEGATIVE OB value)

Greg McMaster

@84wayz, 5950x on x570 aorus master. At one point there were half a dozen of us on discord all with the same motherboards all with the same issue, we tested a range of bios versions, but there was no magic bios. prior to RC5 V15 it would crash and error when just trying to set the standard profiles. RC5 V15 suddenly started working to set the OB values as well. but since then no version has been able to get all the way through setting OB values. I should mention also that Once RC5 v15 sets the values, they are rock solid, and i even run much higher voltage for P1/P2 to achieve very decent results as i have decent cooling. If there is a way to manually lower the starting values of OB and then run the diagnostic i think that would solve the immediate crash on run.

Ismet Togay

Even with default CTR diagnosis results, Geekbench 5 and Cinebench R23 crashes on both multi-core and single-core, and system reboots immediately. 5950x, Asus Dark Hero v3501. (All requirements are OK)

Daniel Boyd

Power management make sure its set to balanced gave me many issues when I didnt realize it was set to max preformance

Yuri Bubliy

I made an announcement in discord. For users who do not try to change the PX OB by themselves, I make an automatic utility. Thank you for sharing the details.

Yuri Bubliy

So the maximum performance profile creates problems? Do I understand you correctly?

Daniel Boyd

Yes when ever I ran a diagnosis it was hitting max temp changing it to performance in windows power options allowed the diagnosis complete and rated my 5800x as a golden sample. If I enable high performance it hits max temp and can cause crashing.

Daniel Boyd

Sorry not in your app but windows power options

Yuri Bubliy

I will add this information to the recommendation, thanks!

Jamie Godwell

RC5v22 was perfectly stable for me as well, trying to get the same frequencies in RC6 I get black screen crashes. v13 seems a little better than v8 did, but still crashes out for me. The crashes will happen at the start of any CBr20 threaded tests, if I load profiles before the test I will get a black screen crash. I can load much more aggressive profiles after a Cinebench run has started and manage to complete the test, it's really strange. RC5v22 I could get 4950mhz on my 5800x stable for Px High for cinebench tests RC6v8 nothing was stable after Diag so I rolled back RCv13 if I enable all profiles after a cinebench test has started I can get up to 5050mhz to complete the test, but if I have 4950mhz set with OB 0 to disable boosting behaviour it will crash on test start, where it worked previously. My P1 & P2 profiles are less stable than they had been previously as well. I feel like something does not handle the beginning of tests/load correctly. I thought this could be LLC so have tried manually increasing those to High/Turbo on my Gigabyte B550 Vision, but same issue. I've also tried running higher voltages within CTR but still get crashes on test start which worked at lower voltages in RC5

84wayz

very strange indeed. Same motherboard huh? I have a version 1.2 of the x570 aorus master. What about you? Also, I second your experience. The RC5 V15 settings are rock solid... Actually, to get some of the later CTR versions to work (they kept crashing and not restarting after diagnostic) I would just re-input the RC5 V15 profile into the later versions to get them to work... But then the later versions would either crash, not finish diagnostic no matter what, or just would not autoload upon starting the pc. Of course, I'm very aware of the mechanics of a pc and specifically mine. All my settings in Bios are what they're supposed to be. I have always cleared and deleted past saved CTR profiles before running new diagnostics...

84wayz

Alright, Just loaded up the RC6 Ver. 13. Must say first and foremost, I am impressed with the compatibility. I deactivated my RC6 V.8 profiles, cleared the CTR saved settings, Turned off the pc completely, then restarted the pc, Opened the new RC6 V.13 and it said "Profile Settings Reapplied" You all have to watch out for new versions saying this ! What it means is that even though you have ran the CTR Config Cleaner, it somehow is pulling up the old settings. So i ran the CTR config Cleaner AGAIN, then Reopened RC6 V.13 and it gave me the proper info of system stats and profile voltage settings. I ran the diagnostic, which ran through everything very quickly and rebooted once, then when windows started, RC6 reopened and had my saved Profile. Perfect and Smooth RC6 V.13 has the highest speed values yet, and surprisingly is giving me lower temps, with my 5900x sitting between 36 to 38 degrees. NICE! i'ma stay at this version for a while, haha Great Work Yuri.

Tim Trahms

I have the Same problems.

Hannes Atze Nagel

Hi there, i still got the problem that my profiles dont get filled after Diagnostics/Profile calculation. I tryed it several times now. Deleted the complete CTR folder, restored default settings, ran diagnostics/profile calculation without 'CB20 testing' but there are still no results saved into the profiles. PX stays at min/mid/high freq 0. I uploaded a log file to the CBT thread at overclock.net https://www.overclock.net/threads/new-clocktuner-for-ryzen-ctr-2-1-rc5.1773637/post-28820744 maybe it helps finding the problem.

Greg McMaster

yea 1.2 as well - running the 33J bios i believe

Greg McMaster

FYI to anyone that has been paying attention to this thread - Yuri sent through a dev version to test that is based on RC6 but with improvements (Discord has more info) He stepped me through everything as we tested it and we were able to get the CTR diagnostic and OB tests to complete across the board. All stress tests afterwards were rock solid! AND the values it determined were higher than RC5 V15 as well! Very promising build - which also gives the user to re-run the specific OB test manually if the values didn't apply during the initial diagnostic.

Greg McMaster

Gabriel - Yuri reached out and we performed a lot of 1 on 1 testing of a new dev build today - it is definately worth sticking around to see if the next release solves your problems.

Gabriel

thanks for the update. Maybe he was having a bad day :)

84wayz

That's great to hear. I'm glad that Yuri could help you reach your desired results. Happy going forward with CTR !

Yuri Bubliy

In your case CTR was unable to run Cinebench R20 (2T, 4T and 8T) or Cinebench R20 was closed by the user. Unfortunately, I don't know why this happened. Try downloading Cinebench R20 and reinsert it into the CB20 folder (this is the only way to clear CInebench R20 from user settings).

Hannes Atze Nagel

Thats why i tryed to run Diagnostics with 'CB20 testing' unchecked. But it is running CB20 nevertheles.

Ericsson Hwang

I have a BSOD, freeze, or reboot after a lot of hours and Event Viewer says it's Processor APIC 9, 10, or 11 (Core 4-5). Which profile should I change the OB, voltage, or clock? Everything else seems good and so far the best I've had.

Nicholas Weiss

I’m seeing similar results as Hannes and have tried replacing the CB20 folder with the direct download insertion into the CB20 folder with no luck. What I observe is that CTR is able to trigger the 2T process, but the process doesn't crash and CTR does not kill the cinebench process before starting the 4T or 8T test. Watching task manager I see the 2T thread is started and running, I then see a second 4 thread instance of CB20 start and immediately close while the 2T is still running. I realized my issue, 21H1 changed the power plan to power saver, so the starting point for CTR was very low when running diagnostic. Changing to balanced brought the starting point for diagnostic to around 4500MHz and it quickly diagnosed and moved forward correctly because it would actually stress the system at that point

Yuri Bubliy

Hi! Let’s try PX HIGH, MID and LOW -20. Extra boost disabled ?

Ericsson Hwang

Okay, I will try, thanks! Yes extra boost disabled. Calculate OB put PX High 54, Mid 60, Low 63. I should have mentioned HWINFO says Core 4-5 are my best/highest cores.

Jamie Godwell

I can't get RC6 running stable on my PC at anything close to what I could get in RC5, I can't make sense of it myself. I disabled any kind of dynamic profiles by setting CB0 on all P#, set frequencies that had been tested stable in RC5, and added 25mv voltage to profiles each time I crashed, yet still had crashes. Can you please send me a link to the Discord? I'm hoping someone may be able to assist in checking this with me. I'm running a 5800x on Gigabyte B550 Vision

Net30

id second jamie May have to go back to RC5. Right now my CTR is just off. The diagnosis part works better on this version but once the profiles are on, it crashes. Within an hour, every time. Dosent matter if i boost voltage or lower speed. I think it clashing with other programs. keep getting pci mutex errors. Like a ton of them, then crash. I know it sucks everyone trying to tell you what to do, but may I suggest like a OC then a work setting. The work being more stable and not pushing to the point of instability. I love the idea of getting the extra performance but cant sacrifice reliability, as its how i make my $.

Ericsson Hwang

Hi Yuri, Tried the 44/50/53, APIC 8 (Core 4, my best core) crash, after 10 hours of stress test though. I feel it's very close, I'll try to lower HIGH slightly. For my information later, how much do you recommend lowering OB each try if stability is almost there?

Santiago Alcocer

I´m trying to set CTR profiles as follows: P1 as higher voltage and higher freqs for heavy loads starting from 75% CPU usage. P2 as undervolt profile for medium/low loads below 75% usage. CTR doesn´t let me do it. Any suggestion about how could I achieve it? Thanks

S. D. Gwynn

Is there a guide for stepping up after auto profiles and ob settings are enabled? How do I go about improving performance after the initial setup?

Santiago Alcocer

Tried before asking :) doesn´t work. CTR doesn´t let me do it. I could do as you say in 2.0 but couldn´t do it again with 2.1 (any version) Should I go back to 2.0 to have this? Or is there any other way I can do it in 2.1? Btw, Cannot set CPU usage min value to 0 for any profile P1 or P2. I would like to let CTR manage CPU VID and freqs from 0 value as in 2.0 but seems is not possible in 2.1. Any advise please? :)

Erkan Recber

As always great work. I am now little bit confused. Are the other settings in the bios now unimportant. Global c state control and the other settings from the bios guide?

Asryan

Hi I've just ran the diagnostic on new version but I'm a bit confused about px ob limit, ob high and all It's all new to me i don't know if i should tweak anything Also i saw after than i needed CPPC and prefered core enabled. it was on auto is this OK or should i run the diagnostic again? I have the latest chipset driver installed which was released today , is it ok or should i uninstall it? If so should i run the diagnostic again too? Thanks!

ygor cardoso

how to fix CMD_FAILED 5 error when px is enabled?

Rory O'Donnell

I'm having frequent system reboots recently, only significantly change was applying the recent windows update. Anyone having stability issues?

Asryan

For LLC should I leave it Auto in bios then?

Rory O'Donnell

I've seem to stablize system by reducing all profiles by 50mhz and setting OB TO 0

Sgt. Hatred

Not as aggressive, but the first version ive used and tested qith zero issues. Worked flawlessly on a pc with 3900x. Testing with 5900x.. if no issues, you are "the king". Will update if 2/2. Ill take 100% stability any day.

Jose Javier Nájar Alemany

Can't diagnose with 5800X and Noctua NH-D15, 3rd testing phase produces over 90ºC temps and the process is aborted

Daniel Boyd

right click your start button select power options click on additional power options make sure you are balanced not max performance I had the same issue changing this fixed it

Nobody at nowhere

Hello, wanted to share a heads-up. I've been running CTR 2.1 RC6 ver.13 June 3. Last night, windows performed its June update, and the following morning my machine did a hard reset a short time after the first boot. When it came back up, it again did a spontaneous reboot a short while later.

Nobody at nowhere

Oops - hit return. To continue, I assumed it was the updates, but not seeing any recent news of issues, I thought to 'exit' CTR as soon as it started to run after a reboot. I waited a short time --- then Bitdefender, the antivirus I run, said it was disinfecting a file. Yup. It reported a short time later that that "The file H:\CTR 2.1 RC6 ver.13\CTR_UPDATE.exe is infected with Trojan.GenericKD.46438418 and was moved to quarantine. It is recommended that you run a System Scan to make sure your system is clean". Some time later, it reported the same for the original extracted files in my download directory. Clearly, the reason for the spontaneous reboot was Bitdefender attempting to quarantine the file. I also assume that the claim of infection is a false positive, but would appreciate just a sentence to confirm that, then I can contact Bitdefender and advise them that it's a false positive. Cheers!

Ryan Hensley

open command promt in ADMIN mode, then copy paste this, powercfg.exe -duplicatescheme 381b4222-f694-41f0-9685-ff5bb260df2e should restore your "balanced profile" one can use this nifty tool btw to modify "power plans" but be CAREFUL and backup power plans ALL OF IT before you change ANYTHING bc it can make a big problem happen real quick, (if it doesnt post the link, sorry) unsure what rules are for patreon. https://drive.google.com/file/d/1P3SlXo8MGitEPh9_vMf6ZAoWcAPGeIAP/view?usp=sharing

André Calamari

Guys I have an issue with this new version, when I start diagnostic, it runs Cinebench and that's it. After Cinebench test is over, I can only see on the app ''Cinebench R20 Started" and that's it, it works well with the previous RC5 version but on this one process gets stuck right at the beginning. Can someone help?

Nobody at nowhere

Quite a few antivirus vendors see CTR_UPDATE.exe as malicious:

Tom DePaolo

I have a question about the correct sheeting for PBO. In the PDF it says to disable ppt,EDC limits or you get a hot iron. If it is set to auto, disabled or to motherboard it stops due to high ppt, even over 250. What should I have the PBO settings set to for a 5950 on a dark hero? I want to keep this chip healthy, lots of overclocking on my last 2 cpu's definitely caused a drop in performance compared to new. When I ran this chip out of the box it seems to be a winner.

Tom DePaolo

Also, does it say manual LLC is recommended only if the current vdroop is too low or high? Or does that always happen?

Tom DePaolo

Have you cleared out the profiles folder and are there other versions still installed? I have had to clean out old installs and install fresh when I had an issue like that and CB20 wouldn't work right.

Gabriel Morais Warpechowski

Is this: "Basic BIOS Guide for CTR 2.1 (beta 6 and RC1)", the one to use with the latest CTR?

Setherio

IIRC: Target goal for vdroop is 2.5% - each motherboard manufacturer has different settings to achieve this and even some boards differ between each manufacturer.

锦鲤Mark

Early access can get Project Hydra?

Norman P. Aquino

Any reason why this old CTR version was pinned?

Norman P. Aquino

Is it OK to set PX high voltage at 1.45v (5075MHz, OB=0), PX mid at 1.4v (4900MHz, OB=1) and PX low at 1.375v (4775MHz, OB=1) for benchmark purposes? My PX high is also stable at 1.425v (5025MHz in an air-conditioned room and 5000MHz without air-con [ambient temp at 35 degrees Celsius]). I've never managed to achieve stability at 5000MHz and 1.4v. Thanks.

Tom DePaolo

It is the latest standard version. The other releases are the game mode versions.

Tom DePaolo

I'd say it's fine. The older versions of CTR used voltages in that range up until dynamic profiles were added if I remember correctly. If you have LLC turned up high also it could be bad for the chip at that voltage. 1.45 isn't crazy for PX High at all. The starting voltages are pretty conservative now at all levels. For max performance you need to do some testing at different voltages. If I just hit diagnose It sets a 5950X to 1050 and 1150 for p1 and p2 and 5900x to 1175 and 1250.

Darren Mollinga

I am having the same issue. Aorus Master, 5950X, 64gb Gskill Neo, custom cooling.

Maxim

I think, I got a (for me) working solution: Issue was an instant crashing during the diagnostics with no profile creation. My solution was: Increase the diagnostic voltage to 1290mV. After that, CTR was able to create at least 2 of 3 profiles. P1 was still missing. After succesfully running the calculate OB, I created the P1 by myself. Now, after some Cinebench R20 and AIDA64 testing ist seems to be stable.

Maxim

Edit: Nope, keeps in crashing in games. Diagnostic still not creates any profiles. (Exception: one time PX was created). Rating jumps between "Bronze" and "Gold".

Keith McCann

Is your ram overclock stable? I know a poor ram oc in the past would cause the ratings to change to a lower value.

Maxim

Hello Keith! I activated the XMP Profile, so it should be OK. Now, I tested Hydra and it works perfectly.

Alejandro

Hello! When I start windows the profile don´t load. I have activate this option in profile settings

Matt Mclean

Hi there, I am quite new to this world of overclocking and optimisation, and have a question about what profile would be best to optimise using single thread processors. I have a threadripper 3970X 32 core processor and am running Ableton, which makes use of single threads. What would be the ideal profile to aim for? Can provide the diagnostics if that would help as well. Thanks for anyone's help here!

Miguel Ángel Cifuentes López

Hi Alejandro, I don't know if you have already solved the problem, but if you cannot verify that the CTR does not have the option to run as administrator enabled, and you can also force Windows to start CTR by placing a CTR shortcut in the startup folder, You press Windows button + R to open run and type (shell: startup) without the parentheses and copy the CTR shortcut in there. I hope it serves you, good luck

Daniel Robaina Cazorla

Hello! i just became patreon and after downloading the RC6 version of ctr lets say it doesnt detect the temp or the frequency of the cores and when i try to diagnostic it kinda crashes, it didnt happen with the RC5 version and i haven't touched anything. Any ideas? thanks!! if this helps i have a dark hero mobo and a 5900x, 3600 Ram

Tomasz Muszyński

CTR has a bug from the very beginning caused when start up a computer from hibernation. It is unable to apply profile and CPU works on default prams. There is also no option to Run at Windows Start. I think that you should consider to add some idiot button for people not interested to know whole tuning procedure. Just pressing once and after hour everything is set and done. I have to complain that I have lost over an hour and after tuning it did not create profiles or maybe I did not know how to do it - it was better to see on previous versions - just pressing a button to crate profiles . But Idiot button would be better :)

Patryk Figura

Hello, im new can somebody share invite to discord ? :D