PRINT IN PLACE STORAGE BOX (DIAMOND) (Patreon)

I really love experimenting with print-in-place stuff. Its one of the most interesting aspect of 3d printing. No other process can do that, and its always a challenge to design something functionnal, attractive and suitable while keeping in mind it has to be printed in one single part. So here's another storage box. :p Small but fully functionnal!! All you need is a well calibrated printer. Doesnt need to be perfect, but be sure to have good bridge settings and watch for overextrusion!!!! You don't want that! 

I recommend a layer height of 0.2mm or less. Higher than this, like 0.24 or 0.28mm, you may have issues with the hinges. 

-No support needed-No assembly required (except for the diamond on the side if youwanna use it! :p )-Just print and enjoy-Files already placed in the right orientation

You can scale the file as you wish. Up or down. I've tried 50% of the prusa file and it worked like a charm.

The diamond on the side is not necessary, but i think it gives a little touch to the box. I have choosed glow-in-the-dark filament for this part as you can see in the pictures.

Have fun!!! Keep Printing!!!! :p 

Pascal