HOT WHEELS DIORAMA - TESLA EV CHARGING STATION (Patreon)

Another little diorama for my Hot Wheels Friends! :p 

Hot Wheels are releasing more and more EV models in their collection (although i don't have any 😅) and i thought some of you would like this one. 

IT IS NOT an easy one... In fact this one, combine with my big and clumsy fingers, is a hell of a nightmare.  

I think its the smallest parts i have made so for. The tesla chargers are a "pita" when it comes to stringing and glueing them without putting some glue everywhere was a real challenge for me. 

But its totally doable. 

The thing is 100% free of supports. All parts are already placed in the right orientation and the color of the parts are even in the file name! ;) But feel free to change them if you want, its your project now! Its just a guideline. 

-3 walls everywhere. -10% Infill (rectilinear) for most part. I suggest 15% for the main base (the parking)-Do all the big parts with 0.3 layer height. Small details like the chargers shall be done with 0.15 or less layer height for best results. 

I have included some exploded views, numbered step by step, but there's no other instructions for the assembly. Its pretty straight forward, glue all the parts following each steps, and everything should be fine! NOTE: If you don't wanna glue the roof, you can leave it as is. I have design the supports (the red "Y" on each side) to hold the roof withour any glue. So if you think its more practical for you to be able to remove the roof, just put the roof on the supports without any glue and the supports will do the rest. ;) 

If you have any questions, feel free to contact me here with a private message! As usual, i will try to help you as much as i can! 

Never been so fun being ecofriendly!!!!! 😝😝