Home Creators Posts Import Register Favorites Logout

Content

In the first two parts of this series, we established how to conceptually divide a target building using unified naming conventions for both the exterior and the interior. However, a conceptual map is only half the battle. Once a breach is executed, the sensory overload of Close Quarters Battle (CQB) begins. Dust, smoke, deafening noise, and structural interference routinely degrade radio communications. In these environments, operators cannot constantly ask for directions or status updates without flooding the net and causing paralysis.

To maintain the operational tempo and prevent fatal friendly-fire incidents (fratricide), assault forces rely heavily on physical, visual markers. These tools act as a trail of tactical breadcrumbs, communicating the status of an environment to follow-on forces, command elements, and air assets without a single word being spoken.

Here is the breakdown of the four primary visual marking tools used in urban operations: Chemlights, VS-17 panels, tactical chalk, and spray paint.

1. Chemlights: The Foundation of Low-Light Marking

Chemical lights (glow sticks) are the undisputed workhorses of temporary tactical marking. They are lightweight, completely waterproof, require no batteries, emit no heat, and are highly visible under Night Vision Goggles (NVGs).

While the golden rule of chemlights is that colors are strictly dictated by unit Standard Operating Procedures (SOPs) rather than a universal standard, most militaries default to a common visual vocabulary:

Green: Typically denotes a room that has been cleared and is safe for follow-on forces to enter.

Red: Indicates an uncleared room, a structural hazard, or an unexploded ordnance (UXO).

Blue: Heavily favored for marking the Casualty Collection Point (CCP). If an operator is dragging a wounded teammate through a dark, smoke-filled corridor, they know to move toward the blue glow. Blue is also highly effective under older green-phosphor NVGs because it provides sharp contrast without "blooming" or washing out the operator's vision.

Infrared (IR): Used extensively during night raids to mark cleared areas exclusively for friendly forces wearing NVGs, keeping the environment pitch-black to the naked eye of the enemy.

Dedicated Chemlight Tactics, Techniques, and Procedures (TTPs): In a tactical environment, chemlights are rarely just cracked and tossed on the ground. They are modified for specific missions.

"Tootsie Rolling": A standard chemlight is often too bright for covert movement. Operators will wrap the entire plastic tube in black electrical tape, leaving only the very tip or a tiny slit exposed. This creates a highly directional, ultra-low signature light perfect for reading maps or marking a path without illuminating an entire hallway.

Chemlight Bundles ("IR Bombs"): When marking a large Helicopter Landing Zone (HLZ) or a captured building for Close Air Support (CAS)—such as an AC-130 gunship—a single light is insufficient. Operators will pre-tie bundles of five to ten IR chemlights onto a single carabiner. When cracked simultaneously and thrown onto a roof, they create a massive infrared beacon visible from miles above.

The "Buzz-Saw": By tying a chemlight to a three-foot length of 550 paracord and spinning it rapidly in a circle, an operator creates a bright, distinct strobe effect. This is the universal backup signal for marking extraction zones or guiding in MEDEVAC helicopters when smoke grenades are unavailable.

The "Daisy Chain": Subterranean (Sub-T) and tunnel clearance operations are notoriously disorienting. Assault teams will attach chemlights at intervals along a spool of 550 cord. As they push deeper into the darkness, they unspool the cord, leaving a continuous, glowing physical lifeline that leads directly back to the surface.

High vs. Low Placement: A chemlight dropped low on the floor generally denotes room status. Conversely, a chemlight tied high to a doorknob or hinge is used for route marking, keeping the light at eye level for an egressing team.

2. VS-17 Panels: Macro-Level Coordination

While chemlights are for micro-level navigation inside a structure, the VS-17 panel is designed for macro-level, air-to-ground coordination. The VS-17 is a heavy-duty fabric marker that is bright signal-orange on one side and signal-cerise (pink) on the other.

During urban combat, city blocks look identical from 10,000 feet in the air. To prevent CAS aircraft or artillery from dropping ordnance on friendly troops, units drape VS-17 panels flat across the roof (Side 5) of their occupied buildings or pin them to the hoods of their vehicles. In large-scale linear pushes through a city, these panels mark the Forward Line of Own Troops (FLOT), allowing commanders to see exactly how far their assault elements have advanced.

Inside a building, if a squad is taking fire from an adjacent friendly unit, they can hang a VS-17 panel out of a window. This acts as a massive, unmistakable flag that screams, "Friendly forces occupy this floor—shift fire."

3. Tactical Chalk and Spray Paint: Leaving Permanent Data

Chemlights and panels communicate basic status, but chalk and spray paint are used to relay detailed, semi-permanent information. This is predominantly done using the standard NATO/FEMA "Search Mark" system on doors or adjacent walls.

The Marking System:

The Entry Slash (/): Upon making entry into a room or building, the trail operator draws a single diagonal slash. This tells anyone passing by that friendly forces are currently inside, conducting a clearance.

The Exit Cross (X): When the team exits and declares the space clear, they draw an opposing slash to complete the 'X'.

The Quadrants: Crucial data is then written in the four spaces around the 'X':

Top: The Date and Time Group (DTG) of the search.

Left: The unit identifier (e.g., "A-Co, 2nd Plt").

Right: Hazards identified inside (e.g., "IED", "Rats", "Biohazard").

Bottom: The number of casualties or non-combatants found (e.g., "2 KIA", "3 CIV").

The Trade-off: Operators must choose their medium carefully. Tactical chalk (often lumber crayons) is completely silent and fast to apply, but it can be easily washed away by rain, dust, or passing gear. Spray paint is permanent, highly visible, and works on rubble or blown concrete. However, spray paint has a fatal flaw for stealth operations: the metal mixing ball bearing inside the can rattles loudly. To counter this, assaulters will magnetize the bottom of the can to freeze the ball in place, or purchase specialized "tactical" paint that lacks the bearing entirely.

4.      Marking the Breach and Point of Entry (POE)

When a building is hit with an explosive breach, or when multiple doors and windows are kicked in during a raid, the exterior is often obscured by smoke and rubble. Follow-on forces—such as the reserve squad, the command element, or medics—must know exactly which entryway is the active, cleared path into the structure.

To eliminate confusion at the threshold, the initial assault element uses several immediate POE marking methods:

The "Gate" (Chemlights): The trail man of the entering stack will drop two chemlights on the ground, one on each side of the threshold, creating a visual "gate." Anyone approaching the building knows to walk exactly between those two lights to enter the cleared path safely.

Engineer Tape & IR Glint Tape: A strip of high-visibility white engineer tape, or a square of Infrared (IR) reflective tape, is quickly tied or slapped onto the door frame or the exposed rebar of a blown wall. Under Night Vision Goggles (NVGs), IR tape reflects ambient light brilliantly, acting as a beacon for the exact entry point.

Directional Chevrons: If time permits or the breach is meant to be a sustained entry point, operators will use spray paint to draw a massive chevron (^ or >) on the adjacent wall pointing directly to the doorway, often accompanied by the assaulting unit's callsign.

Conclusion

Detailed tactical maneuvers and room-clearing geometry are useless if a force cannot communicate its presence and findings to the rest of the element. By integrating chemlights, VS-17 panels, and precise marking systems into their standard operating procedures, an assault force bridges the gap between individual navigation and unit-wide coordination. These visual tools cut through the fog of war, ensuring that every operator, pilot, and commander shares the exact same operational picture.

As always, thanks for your attention.

Files

Comments

Keith wong

Thanks for sharing learned a lot from three lessons too . New things about chem light too