Home Creators Posts Import Register Favorites Logout

Videos

  • 523878632.mp4

Downloads

Content

Hello everyone. As promised here is a video on gap filling and assembly (with some extra bits about working with sub-assemblies). The fundamental series is primarily aimed at beginners and I really try to approach the topics from the ground up, however hopefully there's some bits in there that might be interesting for more experienced hobbyists too. This one took a while to make but I would like to return to the series with some shorter videos as I still plan to cover many topics like edge highlighting, basecoating, paint dilution even using a wet palette. I'm still planning an announcement video in the next few days for the new Patreon tier as that will be live next month but it's just been a little delayed. Anyway, I hope everyone has had a great week and maybe looking forward to some quality hobby time at the weekend. If you have any questions about the video or any topics you think would be good to cover let me know in the comments!

Edit*I've now added timestamps and product links below. - Dave

TIME STAMPS

0:47 Clean-up & Assembly: Tools

4:59 Abrasives

6:10 Glues

9:56 Gap Filling- Tools10:57 Gap Filling - Milliput

12:12 Example - Using Milliput to fill gaps on painted miniatures

14:45 Gap Filling - Green Stuff

16:38 Example - Using Green Stuff to fill gaps

18:52 Tamiya Quick Type

19:40 Other highly recommended tools

23:11 How to work with Subassemblies

Products Used: Tamiya Side Cutters https://amzn.to/45G7al7

& Hand Saw https://amzn.to/46eW72s

Godhand Ultimate Nipper 5.0 https://amzn.to/47SHJy8

Swann Morton Scalpel Handle No.3 https://amzn.to/4lPXwBehttps://www.scalemodelshop.co.uk/no-3-swann-morton-handle/

Swann Morton 10a Blade https://amzn.to/3JWr8Q0

Cheaper Swann Morton 15a Blade https://www.scalemodelshop.co.uk/100x-no-15a-scalpel-blade-swann-morton-0120-p17410/Abrasives

Tamiya Sandpaper Set https://amzn.to/46fKYyshttps://www.scalemodelshop.co.uk/tamiya-abrasives-ultra-fine-87024/?gad_source=1&gad_campaignid=22666119491&gbraid=0AAAAAD-a1XKKG0lDr4t3KRhC683x10uZ4&gclid=Cj0KCQjwwsrFBhD6ARIsAPnUFD3GNWGz8xq536JufUHFBQnAJOxFTC9OEMbBXmy0T4x0rQk8QIKePnYaAltxEALw_wcBhttps://elementgames.co.uk/paints-hobby-and-scenery-by-manufacturer/tamiya/tamiya-finishing-accessories/finishing-abrasives-extra-fine?d=10731Tamiya Sanding Sponge 2000 Grit https://elementgames.co.uk/paints-hobby-and-scenery-by-manufacturer/tamiya/tamiya-finishing-accessories/sanding-sponge-sheet-2000?d=10731

DSPIAE Sanding Sponge/Sticks

https://www.scalemodelshop.co.uk/1000-to-2500-sanding-sponge-30pcs-dspiae-ss-s02-p11456/

Pin Vice/ Hobby Drill https://www.scalemodelshop.co.uk/pin-vice-double-ended-swivel-top-and-5-drills-modelcraft-ppv2237-d-p16249/Needle Fileshttps://www.scalemodelshop.co.uk/set-of-5-diamond-needle-files-modelcraft-pfl6002-p16221/https://elementgames.co.uk/paints-hobby-and-scenery/expo-gaming-gear/set-10-needle-files-in-wallet-140-x-3mm?d=10731GluesTamiya Extra Thin https://amzn.to/3JEPuhh

Regular(might be cheaper elsewhere)  https://amzn.to/4fZmmgFSuperglue (most brands are fine) https://amzn.to/3HyAwc4

VMS Black CA https://www.scalemodelshop.co.uk/20g-flexy-5k-black-ca-glue-vms-p17922/

VMS CA Debonder https://www.scalemodelshop.co.uk/glue-remove-vms-p17749/

DSPIAE Push Broach Combination Set https://www.scalemodelshop.co.uk/push-broach-combination-set-0-1-0-15-0-3-0-5-1-0mm-dspiae-cs-pb01-p11504/

Putties

Green StuffTube - https://amzn.to/47DAzOr

Tape -  https://amzn.to/4lVFn5d

Milliput Standard - https://amzn.to/4nbOTSO

Tamiya Quick Type - https://amzn.to/45JiEUY

Sculpting Tools

Clay Shapers - https://amzn.to/4p0Nb8l

Wax Carving Tools - https://amzn.to/4g0xB8s

Magnifiers - https://amzn.to/45ECd

Files

Comments

Hellglazer

Really great video, mate! Super useful to see some of the tools used.

Anthony O'Donnell

It's Friday and a new Infernal Brush Video drops, woohoo!!

Kieran Mclaughlin

Class video man! Just in time to put a few orders in for the weekend. As always, the info presented and production quality is brilliant!

eric magyar

Thanks for this one Dave! it's great to see this part of the process. Even though many of us are veteran hobbyists here there is always that one tip that can help to elevate our work and there are many in this one!

David Oxencis

Fantastic video, even after years in the hobby it was a great watch and I definitely picked up a few tips!

Rob Purcell

Totally brilliant. Although I’ve seen you do a lot of this stuff in other videos, focusing on the techniques like this is super helpful. Thanks!

Stratto

What a brilliant video, mate. I've noticed one area I keep missing is better assembly. Lost could have been how many times I've primed or undercoated only to realise a mould line, a sprue mark, or damage I never saw.

Andrew Steel (CMDante)

Excellent guide - certainly the most thorough and complete on the topic that I’ve ever seen! 💪

Vladimir Shestakov

Thank you, Dave! I found this video really useful. I especially appreciate the knife suggestion, I’ve tried many different knives before and was never fully satisfied. I totally agree that a lot of manufacturers tend to overcomplicate things. Turns out, a surgical knife really is the best solution. By the way, I came across a great website with discounts on medical equipment and managed to get 100 blades for just $8.09 including tax, ordered, will see if I receive it. Also, the part about using putty was very helpful, now I clearly see the mistakes I’ve been making.

GMOpaint

There must be psychic shenanigans going on because this is just what I was about to do this weekend! What a timing!

Infernal Brush

Hey Vladimir thank you for the feedback and I'm glad you liked the video. $8 sounds like an absolute bargain and at that price I would stock up for a while, I hope they are genuine and not some knock offs at that price haha. I sill find working with putty can be quite tricky and it definitely has a steep learning curve but I hope some of these tips work for you!

Infernal Brush

Thank you man and thank you for the clean up advice!

Infernal Brush

It always happens! Magnifiers and good lighting help me for sure but it's not uncommon to find bits even after its primed still, just hopefully it's fairly minimal. Glad you liked the video and I hope it helps!

Infernal Brush

That's great to hear David, I'm always worried I over explain some things but I'm glad there's some extra tips in there that are still useful. I appreciate the feedback!

Infernal Brush

Thank you Eric, that's so nice to hear! Although it's a series catered for beginners I'm glad there still some useful stuff in there for the veterans of the hobby!

Infernal Brush

Thank you Kieran that's really nice to hear, happy hobbying!

Spruekaiju

Lots of stuff I think I learned watching your past vids and breaking down. Glad its all laid out. Good stuff! My biggest issue was sub assemblies that I was gluing together. In your opinion is it safer to scrap away paint where things are going to be attached and use super glue? I want to use plastic glue, but early on I learned my paint would get eaten away!

GMOpaint

Also I tried mixing green stuff and milliput for filling gaps and it has worked wonders. Specially because milliput sometimes thins a bit too much and doesnt really cover the crevices edge when you are filling gaps. It is also eye opener to see techniques on how to move the plastiline and the thin plastic cement too.

Mudcreek_Miniatures

Excellent video, can’t wait to try these techniques out! Gap filling has always scared me off for some reason but no longer ☺️

Infernal Brush

Oh yes I've seen these but not tried one yet. Thanks I will have to give one a go!

Andrea Massimo Guiotto

They just need a bit of patience and a soft touch but you can cut precisely even between Space Marines armour joint's ridges.

Infernal Brush

Hey, glad you like the video! Yes you can use superglue instead and perhaps it would be a little safer. Either way using something like a paperclip to apply it is a good idea.

Spruekaiju

Oh yeah and toothpicks!

Dave M

A super useful video. Many thanks.

Chris Mills

Thanks for dispelling some of the worries about gap filling, especially after having painted a mini! Brilliant content Dave! 🙌

Jerrid Green

Dude i really appreciate you showing how you fill gaps. Ive been doing mini with valejo plastic putty and a damp brush but makes me want to try using green stuff too.

A.S. Miniatures

Thank you so much for this video Dave ! It's really, really usefull :D

Charles Rowe

Fantastic video, thanks for all the detail and recommendations! Never really tried working with green stuff before so itching to give that a go. I have a whole bunch of resin models I am looking at putting together and painting - would love to see a video about all the nuances about working with this material if you ever have the time or inclination to do a prepping video

mcsimeon

Still confused as to how you are supposed to glue sub-assemblies back together that aren't in hidden places and how to make the transition seamless.

Infernal Brush

Hey there, do you mean filling gaps on painted areas? If so I show that at around 12mins in. The different sections about glue also detail how to glue painted parts.

mcsimeon

Seeing the process of actually gluing them together and deciding what glue to use would be of much help to beginners trying to do sub-assembly painting.

AKiRA

Hello, I would like to know what is the thickness of the wire that you use and where can we buy it? Can we cut it afterwards with the classic pliers or do we need a saw? Thank you in advance

Infernal Brush

It's just paperclip wire. You could alternatively use 1mm brass rod. You should be fine cutting wire up to 1mm with wire cutters or pliers.

Carbs

Great video, Dave. I had no idea you could use plastic cement to clean up mould lines, but it seems so obvious in retrospect. Do you make a pass with the back of a scalpel blade first? Or just go straight to glue? I tend to use the former, and never really feel that successful with those small, tight spaces.

Infernal Brush

Hey Carbs. I would try to remove most of the material first using a scalpel or the push broach and then use some sandpaper to further smooth it and then the cement as the last step to fully smooth out the area. The glue alone is not really enough to fully remove moldlines and any extra material in my experience and effectively it just smooths the detail thats already there. Actually the more I've been using the push broach the more I think it's perfect tool for getting into those tough to reach areas and scribing lines like on those ridged cables etc. Ofcourse the scalpel is fine too but that tool just makes it a bit easier with some practice and definitely worth picking up.

Carbs

Those are some of the fiddliest and most tedious parts to prepare, along with plasma coils. Thank you Dave, I’ll definitely give those broaches a go, I’m very curious to see how they will perform. Thank you as well for the extensive list of links, you’re a champion mate.

Thomas Reilly

Excellent video mate, the video we all wish we had when starting 😂

Madao

Great video Dave , thx a lot !

AKiRA

Thanks for your answer .

Petter Hermansen

Great video! Do you also finish the bases separately before gluing on the miniatures?

Infernal Brush

Quite rarely, only if the miniature itself makes it awkward to paint the base. Otherwise it's glued on and then the basing material is applied and painted with it on the base.

BobMylan

I really learned a lot with this video, so usefull

Curtis Atkinson

I can't say how much I appreciate the most basic fundamental topics covered by an expert, especially this kind of thing that doenst get as much detailed attention as it deserves. It takes years of experience to figure this stuff out the hard way, and we appreciate you sharing this Dave.