Home Creators Posts Import Register Favorites Logout

Content

On this week's podcast, we'll be talking scratch building techniques. So, drop some knowledge on us.

What tools, components, etc. do you use for scratch building? Do you have some advice for doing some things on the cheap? Let us have it!

Comments

Ryan Emmenegger

Both my L1 and L2 were scratch built cardboard! 1. TAPE TAPE TAPE the outline of the fin slots and use it as a guide for cutting. I find its much easier to follow the edge of masking tape than it is any pen or maker line. As for cutting the slots, I use a dremel with cutoff wheel and take it slow. You could also use a really sharp knife but a dremel is worth the time save. Epoxy can hide any oopsies. 2. The same can be applied to cutting tubes to length, I find it easier to follow the edge of masking tape than a line. Cutting it little by little around the circumference with a hacksaw works really well. (A chop saw if you have it works great for cutting tubes square). 3. On the cheap (and my L1): cardboard and plywood! Hardware store paracord with the bottom third or so with a layer of duct tape to protect from ejection gasses as the shock cord. Hardware store 5min epoxy and eyebolts / quicklinks. 4. I think a dremel with cutoff wheels and a hacksaw with a sharp blade needed for scratch building as mentioned above.