Home Creators Posts Import Register Favorites Logout

Content

Getting way out ahead of this one to give plenty of time for everyone to get a word in! 


Shoot us your questions, comments, and conversation suggestions in the comments below!

We're looking at maybe transitioning to multiple talking points for general episode and leaning less on having one topic to stretch out unless we have something like the Level 3 prospects concept.

One thing I had considered for discussion this week, though, is "getting your L1 for under $150" including the cost of joining Tripoli or NAR. 

Comments

Bob Green

I'd like to hear a discussion on a $150 L1 rocket build. That would be an excellent video too. Other topics I'd like to hear you guys talk about:

Bob Green

1. Rocket avionics selection: what has the greatest reliability, what to absolutely avoid, what is best if money is not an issue, what is good enough for building a rocket on a budget

Bob Green

2. What are your parachute selection considerations you weigh during construction and on the field? If you had to have just 1 drogue chute what would it be that would work for most of your rockets? What parachute have you used for the greatest number of rockets?

Upsrocketman

A discussion about scratch building vs kit building and what you prefer. My dad and I built a ton of scratch built rockets when I was a kid and it led to me being a scratch builder. Used a scratch built rocket for my L1 and I'm currently building my L3 rocket from scratch. Also, should I build a Macho Matt themed rocket?

Bob Green

3 Building an L2 capable rocket as your L1 rocket - why or why not?

Bob Green

4 Pro/cons of using your L1 rocket for your L2 attempt?

Bob Green

5. Pros/cons of injecting epoxy vs letting the rear motor centering ring be removable and then epoxying both the fin root and the fin-to-inside of the body tube?

Bob Green

6. The converse to the cheapest L1: if money were not an issue what would you build for a L1 attempt? For an L2 attempt?

Bob Green

7. Pros/cons of designing your own rocket for L1? L2?

Bob Green

8. Should you gain experience with dual deployment on cheaper F or G rockets before doing dual deploy on a HPR?

Bob Green

9. Tips, tricks, fatal flaws when packing and prepping chutes?

Eric Beavers

I got one or two... So I'm doing my level 2 with a Wildman Mach 2 - flying on a J275 - Stupid, I know but I just love the way that rocket looks and if your going to do something why not go all the way, haha - anyways... These may be dumb questions. 1. I am using an RRC2L and the 54mm Missile works sled - I drilled myself (3) 1/8" vent holes but oversized one to 5/16" plus a little bit. I had to do this because the rotary switch needed a bigger flat screw driver to turn it on and off. So - I am over vented... Could this be a problem? Is too much venting bad? I hope not but I have time to eliminate a vent hole or 2. Or fill two of them and down size 2 vents to 1/16"? ERGHHH My brain hurts. 2. The AV Bay does not have enough room for another battery and a GPS tracking board. I cannot find radio tracking stuff anywhere - so I bought the simple GPS tracker form Apogee - I am going to attach a BT55 AV bay to the shock cord in the main airframe/drogue chute and put the GPS in there - I think this is a good idea but my good ideas are usually terribly bad ideas. See any issues? Help Me Obi-Wan Kenobi, You're My Only Hope Cheers

SleepySack

Why do you mostly go for Aerotech motors over CTI? Does it come down to availability/preference?

Dane Hauck

If you were to build a ultimate rocketry workshop what equipment/tools would you have

Bob Green

On a college exam I wrote "Help me Obi-Wan Kenobi, you're my only hope". The professor when grading it wrote next to that "studied harder you should have"