Home Creators Posts Import Register Favorites Logout

Content

Alright folks, it was inevitable. Tonight on the podcast we're diving into  what epoxies we like best, what ones we don't like, and what ones we're curious about. 


Tell us your epoxy recommendations in the comments and why you recommend them! Is there any epoxy you think is overrated? Epoxy you hate using? Let it all out! 

Comments

Upsrocketman

For cardboard stuff I'll use titebond for stuff with 29 or smaller motors. Bsi 5 and 30 for 38-54 motors. Anything fiberglass gets west systems if I have it. Recently I've been using US Composites 635 for filets and it seems to work well.

Aleks

The last 18 months I went on an epoxy soul-search of sorts, because I wanted to find something that I could use for all of my future projects. I wanted something strong, affordable, and something less likely to have stock issues in the future. (I won't name any names... [cough] RocketPoxy.) I could write a multi page paper about epoxy with the number of different ones I've tried at this point, but I'll just share a few that I like. I had a lot of fellow rocketeers recommend Loctite E-120HP, which is an aerospace grade structural epoxy which works great for building rockets and making strong fin fillets. Rightfully so, the stuff is awesome. The consistency is thick with a little bit of sag, which works great is most rocket building applications, and it's so strong when cured. The only problem is that it's pretty expensive. A fellow rocketeer Conway Stevens put me onto an epoxy called Infinity Bond EP-120, which is essentially just repacked Loctite that's not Loctite branded. For that reason, it's sold for 1/3 the price when buying 400 ml tubes. I did a side by side test with some fiberglass scraps where I attached fiberglass squares (fins) to a spare piece of fiberglass tubing, and they performed identically. I was able to apply a lot of force without either epoxy failing. That's my go to for pretty much everything anymore. (The best place to order it is gluegun.com) There is not a publicly available TDS for EP-120, but I know a guy with a copy. [winky face] Also, for fiberglass and carbon fiber layups, I've been using AeroPoxy PR2032/PH3660 laminating epoxy. It's a bit thinner than West Systems, is amber in color, and I've have a great experience using it to this point. The final products are very strong, and the results I get are very consistent every time. Compared to West Systems, I was able to get layups with less epoxy, thus lower mass/weight. I picked it up from MAC Performance rocketry.

Michael Grayless

I really like the West Systems Six10 or the Total Boat version called thixo for when I’m doing fillets.

Jonathan Gaboury

For doing fillets I love thixo by total boat. JB weld is also a very good choice in high speed/ high temp stuff. If I want something done fast then I love the loctite 5 minute epoxy and JB quick is another good choice. As for laminating fiberglass/carbon fiber i like to use total boat resin with the medium hardener

BingusBobby

West systems 610 is the way to go. Im using it for my first fiberglass rocket and my level 2. it works great. The static mixers are great for doing internal fillets.

Eric Beavers

I really like the proline 4500. I know a lot of folks don't care for it because of the mess but I've not had that problem. West Systems is my second favorite - mostly because of the thickening products. I don't like the BSI stuff - turns out I am very very allergic to it. Curious if anyone has had any problems with BSI 5/15/30 causing serious health problems.

RocketMan

I’ve used everything from Bob smith, Z poxy, loc tite brand epoxy, jb weld, us composites, west systems, rocket poxy and probably other off the shelf brands I can’t remember. It all honestly comes down to what application you need to use the epoxy for. For a very obvious example you wouldn’t use bob smith 5 minute epoxy on an aeropack or slimline motor retainer. Just like you wouldn’t use JB Weld to glass or cf an airframe. I know I’m preaching to the choir here by saying all this but which epoxy is best to use again comes down to application in which it’s being used. I wouldn’t use a generic store brand epoxy to build something like a 75mm minimum diameter. But would it really make a difference if I used U.S. Composites, West Systems, or some other quality name brand epoxy for the tip to tip lay up. Maybe, but probably not. Surface preparation is probably more important in this case than which brand of epoxy you use for the composite lay up. With all that being said just build the damn rocket with whatever epoxy you feel comfortable with using. Especially if you’re just building standard paper/cardboard and ply wood rockets.

Lanza Colina

Aeropoxy structural and laminating epoxies depending on the application and JB weld for the motor retainers. pretty much all I use, unless I am just tacking things together with CA glue so they will be in place so I can use Aeropoxy over it.