Home Creators Posts Import Register Favorites Logout

Content

Dear Mammoths!  

We are trying to make an official print-setting guide based on what we use for our test prints and based on what we believe to be best practices for SAFE (not fast) printing - based on our amazing support artist The Arcane Gearsmith.  

We want your input!  We are making an online document that we will continue to update as we go.  

Please review it and tell us your thoughts, of course, we will not be able to include all input - but we will consider them!  

Please post comments on tips and tricks, videos of good techniques etc.

For example, what is the best hot water trick guide video?  Or what other resins we should have on that list?

Here is the google doc - feel free to leave a comment in it or post it here.   

All the best
Dav

Comments

Anonymous

I use Siraya Tech Fast Navy Grey and Elegoo Standard 8K Space Grey. I love your supports. Unlike many others, it is a dream to remove your supports. I personally soak the prints in hot water for a few seconds, remove the supports by hand and use a scalpel and tweezers for fine finishing. However, there are always many small remnants of the support tips on the model, which I am still trying to optimize.

Tracy Pierce

Agreed! Supports come off so smoothly. Epax E10, Epax Hard Resin Grey. I don't even use hot water and they just slide right off. I also have the issue with the small remnants of support tips left on the model. One thing that helps is removing some of the mini supports in Lychee.

Anonymous

I use FDM printer - Elegoo Neptune 3 and Cura 5.1. Any advice for that?

MammothFactory

FDM is very much dependant on Temperture, Machine... matirial... and we don't really make our miniatures optimised for it (YET) so sadly it would be much harder to give advice for that at this stage. However please do share if you do it!

Frank Consiglio

Tried these settings with ABS like elegoo grey resin and found they were over exposed. Tried changing the exposure to 2.5 and seemed to work quite well.

Pete Sims

Using Anycubic Photon 4K and Elegoo Mars 3 I agree with the OP, 2.5 seconds exposure and 20 seconds on the base work best for me. I'm using a non-brand resin from a local store that I have found is as good as branded resin (but cheaper). Having said that, I've used those settings with both Elegoo and Anycubic grey and flesh resins. In regards to the other settings, to save a little bit on resin I only use 6 layers not 10. Bottom lift distance 1.5 + 4.5 Retract 1.5 Bottom lift speed is left at the default 120 which has been working fine. Only time I had to slow that was when using Amazon brand translucent ABS like resin.

Pete Sims

I don't know if it's of any help to you but I used to print minis on my FDM - Creality CR6SE. I got the best results with ESun filament, using either a .1 or .2 head with 0.1 layers. Only two walls rather than the default 3. I can't recommend temperature settings as I am not familiar with the Neptune. But usually the filament manufacturer recommended settings are fine here. I tried a suggestion by somebody a year ago to set a .4 head at .1 layer but the detail was smeared and a mess. The smaller heads I mention at the beginning always gave me the best results. You will need to add a filament cleaner though (cheap on Amazon) as the smaller heads will clog easily if any dust or particles get through. Hope that helps a bit, though I would recommend you get a resin printer. The results are better and you can print multiple figures for the same time frame. For instance, I can dump 16 28mm figures through either the Elegoo or Anycubic I have for a 4-5 hours print time. No way my FDM can do that. When I was using the CReality for minis it was 1 figure a day if I was lucky. Larger figures took longer. Plus there's all the extra cleaning to remove the support trees and pray nothing fragile snaps off.

Anonymous

Thanks will let you know how I go. While its never going to be as good as resin I would be happy with I get semi-decent results. I'm still new to 3D printing and I wasnt having high hopes on using FDM for minis but I found some reasonable results with some free models and thought I'd give it a go :)

Pete Sims

Cool, would be good to hear how you get on, I'll see if I can post some of my FDM prints somewhere so you can see how far I got with experimenting and printing. If you need any more help, don't hesitate to ask, somebody might have the answer you need.