Pack Mules - released! (Patreon)

Hi guys,

the pack mules have arrived!

You'll find them in the next posts, check out the very end of them to download the files:

for $1 supporters (medium quality): https://www.patreon.com/posts/12250663
$2 supporters (high quality): https://www.patreon.com/posts/12250405
$5 and $15 supporters: https://www.patreon.com/posts/13633407
 

 At $5 and above you'll find a bonus unloaded and a dead mule among the files, plus we added the Mysterious Chests set to the downloadables which means you can add them to your printing service as a $15 supporter. Thank you for your support!

Info about the prints:

We have printed these models at 80-micron and 120-micron layer height, 15 percent infill and 195 C with PLA, using a 0.4 mm nozzle. You'll need a 6mm brim around the model because legs will release the build plate without it. Plus a minimal slicer support is needed because of the nose and their belly.

Our support setting in Cura:

Support Placement: Touching Build plate
Support overhang angle: 80
Pattern: Zig Zag
Everything else is the basic setting.

Models will be 3.5cm long and around 3 cm tall in print. 

Set the speed to 30-35mm/s to get better result.

More pictures:

Final renders:

They print nicely with minimal support with the settings above: