Nebel fursuit head WIP 1 - Miniature test! (Patreon)
Content
ENGLISH/ESPAÑOL
Hello everybunny!Today we have a post we wanted to write for months. Since this is a personal project we only work on it at night or on weekends, so it's going slowly hehehe
But the moment has come. We finally made our first fursuit head test in miniature! It's our first step into this world, and there are many things to fix for the next tests, but we're incredibly proud and excited. We'll talk a bit about what we did :D
First of all, we 3D modeled the head base with our friend JD. We didn't have a previous base, so we were doing it from scratch, but it turned out close to the references. We kept in mind that the head would "grow" bigger when covered in faux fur. That's why it needed to have big eyes, space between the jaws, etc.
We also designed the denture that would go inside the mouth. We looked at wolf mouths as reference, and we tried to make the two sides match when closed, which would be difficult. But you alreayd know that we love challenges >:3
Now, with the finished model, it was time to print it! For this print, we used TPU filament. Why? Because it's a flexible material! This will make the structure more damage resistant, and, most important, will allow to have a moving jaw without a joint structure with screws and such. We also saw that this kind of base can be printed in mesh to waste less material, more lightweight and breathable, but we'll try that in the next tests.
When the print was finished, we really liked how it looked! But we already saw that the eyes would be small and they were looking too to the side. So for the next test, we will make the forehead flatter so the eyes look front.
Now it came the real deal. It was time for covering the base with faux fur!!!!First, we got the head pattern with the tape method. This method is PERFECT for fursuits, since the fabric stretchiness doesn't matter as it goes glued to the base, so the shape will always look good ^^ You just need to keep in mind the fur direction to make the patterns in one way or another.
With the patterns done, we traced them on the fabric and carefully cut the pieces. It's important to not cut the fur or there will be noticeable chunks cut off ><Also, for sewing faux fur, we recommend using wonderclips over pins. They work much better.
With everything sewn, the next step was glueing the fur to the head base. This process is delicate because if it isn't placed properly, you can lose all your previous work. So we slowly glued all the fur with hot glue. Luckily everything was well placed and glued!
Now came the scariest step; shaving the head. Luckily, we counted with HTRuiz to teach us how to. She's a dog groomer, so there's no one better for teaching us how to use a shaver hahahaHTRuiz shaved the left side, showing us how she did it, how close the shaver had to be, etc. And Cris shaved the right side under her supervision. To be honest, for being the first time we did this and with such a small head, it turned way better than we expected! It looks so pretty!! We still have to improve our shaving skills because we left a couple "bald" spots with the fur shaved too short, specially around the seams. But hey, practice makes perfect :D
With the head shaved, we only had to add some final details. And here's where we realised our biggest mistake. We wanted to cover the inner mouth with black minky to make the gums and lips, but we had glued the faux fur to the inside of the mouth! So we couldn't sew both fabrics edges ;__; it was a disaster. We teared away the faux fur from the lower jaw, but there were hot glue lumps left that made impossible to hand sew the fur, so we couldn't make a good lip and it looks a bit ugly...Well, we will remember it next time
We placed the teeth inside the jaws, which we previously printed and painted, and we just kept them in place with tape to see how they looked like. We realised that among other mistakes, the teeth were a bit too small and didn't align properly, leaving the mouth slightly open. We will have to adjust them for the next test.We still love how fierce and cool they look hehehe >w<Finally, we made some paper ears and eyes, and fake nostrils (the head was too small to cut and shave them)So that's how the first test of our first ever fursuit head turned out! We won't lie, we were afraid that it would turn out terribly wrong. Mistakes were made and we have to improve lots of things, but we think it already looks so cool ;__; he put a lot of work and effort into this and it's giving us great vibes. We're 100% sure that the next test wll turn out much better.
What do you think? We'll be thankful for your honest feedback in this project! It's our first time so any comments, tips and suggestions will help us a lot!
We hope you enjoy this new kind of content in our artist career as much as us >w< Although you will need to wait a while to see how this project continues hehehe x3
----ESPAÑOL----
Hello everybunny!Hoy os traemos un post que llevábamos meses queriendo hacer. Como es un proyecto personal que solo hacemos por las noches o fines de semana, ha ido un poco lento jejeje.
Pero llegó el momento. Hemos podido hacer nuestra primera prueba de cabeza fursuit en miniatura! Es nuestra primera pincelada en este mundo, y hay muchas cosas que corregir en las siguientes pruebas, pero estamos increíblemente orgullosas e ilusionadas. Os contamos un poquito lo que hicimos :D
En primer lugar hicimos con nuestro amigo JD el modelo 3D de la cabeza. No teníamos ninguna base anterior, así que íbamos muy a ciegas, pero quedó muy parecido a las referencias. Intentamos tener en cuenta que la cabeza "crecería" al ponerle el faux fur. Por eso, tenía que tener unos ojos grandes, espacio entre las mandíbulas, etc.
Después también diseñamos una dentadura que iría por dentro. Miramos referencias de bocas de lobo, e intentamos que se acoplasen bien entre ellos. También queríamos que uno de los colmillos se asomase por fuerta con la boca cerrada, cosa que iba a ser bastante complicada. Pero ya sabéis, los retos nos gustan >:3
Ahora sí, con el modelo listo, nos pusimos a imprimirlo! Para esta impresión, usamos filamento de TPU. Por qué? Porque es un material flexible! Esto hace que no sea una estructura delicada por golpes y demás y, sobretodo, que podamos tener la articulación de la mandíbula sin tornillos. También hemos visto que podemos imprimirlo en "malla" para que sea más resistente y transpirable, pero eso lo probaremos más adelante.
Terminada la impresión, nos gustó mucho como se veía! Lo único que vimos es que los ojos iban a ser aún pequeños y que el ángulo que hacían era demasiado grande. Osease, quedan muy de lado, no mirando hacia el frente. Así que, en la próxima prueba, tendremos que aplanarle más la frente para que los ojos estén más de frente.
Con la impresión hecha, era el momento de la verdad. Tocaba ponerle el pelito!!!!En primer lugar, sacamos el patrón de la cabeza con el famoso tape method. Este método es PERFECTO para los fursuit, porque al no tener elasticidad la tela, pues va pegada a la base, la forma quedará siempre bien ^^ Solo tenéis que tener en cuenta la dirección que tendrá el pelo para hacer los patrones de una forma u otra.
Con los patrones hechos, marcamos en la tela y recortamos con cuidado las piezas. Es importante vigilar de no cortar el pelo por debajo o quedarán trasquilones al coser ><Y hablando de coser, para hacerlo con faux fur, os recomendamos usar las pinzas de costura "wonderclips" en vez de alfileres. Os irá muchísimo mejor.
Con todo cosido, el siguiente paso era pegar la tela a la base. Este proceso es bastante delicado, porque si no queda bien colocado, pierdes todo el trabajo anterior. Así que poco a poco fuimos poniendo silicona y pegando las zonas. Por suerte quedó todo muy bien colocado y fijado!
Ahora quedaba uno de los pasos que más miedo nos daba; afeitar la cabeza. Por suerte, contamos con HTRuiz para enseñarnos. Ella es peluquera canina, así que quién mejor que ella para enseñarnos el control de la máquina de afeitar jajajaja. El lado izquierdo lo afeitó ella, enseñándonos como lo hacia, como de cerca había que poner la máquina, etc. Y el lado derecho lo afeitó Cris con su supervisión. Y la verdad, para ser la primera vez que hacemos algo así y con una cabeza tan pequeña, quedó mucho mejor de lo que esperábamos!! Se ve muy bonito!! Aún tenemos que vigilar de marcar menos las pasadas de la máquina, sobretodo en las costuras. Pero oye, la práctica nos hará mejorar :D
Con nuestra cabeza afeitada sólo quedaba ponerle los detalles finales. Y aquí nos dimos cuenta de nuestro gran error. Para hacer la boca por dentro, queríamos usar tela negra y que está hiciera los labios de la mandíbula inferior. Pero habíamos pegado en la boca por dentro el final de la tela rosa!! Así que no podíamos coser y unir la terminación de ambas telas ;___; era un desastre. Despegamos con cuidado el faux fur, pero le quedaron pegotes de silicona que hacían imposible coserlo a mano, sí que no pudimos hacer la forma del labio bonita y quedó un poco feo...Pero bueno, hemos aprendido para la próxima
Pusimos los dientes que habíamos imprimido y pintado anteriormente en la boca y los fijamos con celo para ver cómo quedaba. Nos dimos cuenta de otros pequeños fallos que tenían, como que los dientes eran un poco pequeños y que " chocaban" un poco, dejando la boca un poco abierta. Habrá que ajustarlo para la nueva prueba Aún así, nos encanta lo feroces y divertidos que se ven jejeje >w<
Finalmente, pusimos ojitos y orejas de papel y unos agujeros de nariz falsos( siendo tan pequeños, no podíamos afeitar los y hacerlos reales).
Y así es como se ve la primera prueba de nuestra vida de cabeza de fursuit! No os vamos a mentir, teníamos mucho miedo de que quedase horrible. Han surgido problemas y hay errores que mejorar. Pero jo, lo vemos muy chulo ya ;___; hemos hecho un gran esfuerzo y trabajo y nos da muy buenas sensaciones. Creemos 100% que la siguiente prueba quedará mucho mejor.
Como lo veis vosotres? Agradeceremos de corazón vuestro feedback en este proyecto! Es nuestra primera vez así que cualquier comentario o consejo nos ayudará mil!
Esperamos que disfrutéis de este nuevo contenido en nuestra vida como artistas tanto como nosotras >w< Aunque os tocará esperar un poco para ver cómo sigue este proyecto jejejej x3